Reviews
Fits: SUZUKI Address V100, SUZUKI ADDRESS V100
OEM compatible Exhaust System for professionals
I purchased this product because the OEM was getting rusty and rusty.
It seems that some people can pontificate and some can't. I was the latter.
If the Bolt is passed through the Flange on the Exhaust System side, the Bolt on the Engine side cannot be installed.
I made a mistake here by setting the Flange on the Exhaust System side to a long hole.
As you can imagine, it is thick and large, but the bracket that attaches to the side of the engine should have been a long hole. The reason is that there is a gap between the exhaust port and the exhaust pipe.
Second, the Bracket holes are not flush with the upper and lower holes. A 3mm Spacer was needed between the upper hole and the Engine.
Finally, the bolt at the rear end of the Air cleanerBox could not be installed. The reason is, as usual, the welding position of the Bracket Gap….
We had no choice but to cut it off and weld it back on again. And the heat plate attachment part (Received Nut.) The welding was done by TIG welding.
It was a labor-intensive exhaust system, but it contributed greatly to the improvement of my own technical skills.
Since a semi-automatic or TIG welder with at least 0.6mm wire is required, the work skill is considered to be PRO class.
It would be difficult for an amateur to hit an Exhaust System that has been removed.
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
The packaging was very good, but ...
The packaging was careful and secure. but some rust was visible. A little bit.
So I applied a little rust remover and it worked fine.
It needed a little work, but performance and other things don't seem to be a problem.
We feel this is a good product for those who are particular about Normal look.
View detail
Fits: HONDA DIO DIO AF35, HONDA DIO DIO AF34
For Refresh
I bought it for the LIVE DIOZx Refresh.
The packaging is simple, with only a protective film on the stainless steel part.
There is no Instruction Manual either, but there was no problem because I only had to replace the one that was attached.
The OEM Product was quite deteriorated and the exhaust pipe was rusty and ragged.
When you install this product and engage the engine, the sound is not heard in the state of Idling.
It was a small piece of work.
The acceleration was sluggish and it felt like it was worse than the OEM product.
The highest speed also seems to have dropped some.
It is the performance of the price, but there seems to be no problem for city riding.
Gasket is not included and is required separately.
View detail
That's cheap
I bought it and installed it, but it was new and leaking exhaust, returned it for inspection by the manufacturer And then..
About a month after admitting to an exhaust leak and sending me a new one, the good season is over!
How can you check for exhaust leaks?
I'm prepared for inferior quality because it's cheap, but it's too slow to respond
This is the second time I've used this Exhaust System, and the first time it punched a hole in me after about two years!
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
It rusts
Used for two years It still rusts Also, exhaust leaks at Exhaust End sooner or later The quality of the iron and welding is not good The performance is not bad so it would have been nice if it could have been used for a long time, but it's a shame View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
It doesn't seem to be possible for a car with a stroke up
I thought it would be possible to install it on a vehicle that has been stroked up to 125cc! Monkey engine can go up to 125cc with only the bore ?
The packaging was in good condition, the warranty was included, and the accuracy of the Asia manufacture is better than before However, the quality of the materials still seems to be poor and there was rust floating in the thin areas of the paint
View detail