ai-net Motorcycle Exhausts Reviews

Filter

Write a review and get Webike Points!

Reviews

ai-net Exhausts Clear all

Secondary Air Pipe with Spec. OEM Type Exhaust System

ai-net

27 Sep 2023

Secondary Air Pipe with Spec. OEM Type Exhaust System

Fits: SUZUKI Address V100, SUZUKI ADDRESS V100

Japanese Webike user

3/5

OEM compatible Exhaust System for professionals

I purchased this product because the OEM was getting rusty and rusty.
It seems that some people can pontificate and some can't. I was the latter.

If the Bolt is passed through the Flange on the Exhaust System side, the Bolt on the Engine side cannot be installed.
I made a mistake here by setting the Flange on the Exhaust System side to a long hole.
As you can imagine, it is thick and large, but the bracket that attaches to the side of the engine should have been a long hole. The reason is that there is a gap between the exhaust port and the exhaust pipe.

Second, the Bracket holes are not flush with the upper and lower holes. A 3mm Spacer was needed between the upper hole and the Engine.

Finally, the bolt at the rear end of the Air cleanerBox could not be installed. The reason is, as usual, the welding position of the Bracket Gap….
We had no choice but to cut it off and weld it back on again. And the heat plate attachment part (Received Nut.) The welding was done by TIG welding.

It was a labor-intensive exhaust system, but it contributed greatly to the improvement of my own technical skills.

Since a semi-automatic or TIG welder with at least 0.6mm wire is required, the work skill is considered to be PRO class.

It would be difficult for an amateur to hit an Exhaust System that has been removed. View detail

ai-net

19 May 2023

DIO Series OEM Type Exhaust

Fits: HONDA DIO DIO AF35, HONDA DIO DIO AF34

Japanese Webike user

4/5

Exhaust System for AF34/35 with the best cost performance

2stExhaust System is a product that wears out faster than expected. "2000 AF34 71CC bore up version." Although we are using this one for the
This is the third time I have purchased this iNet Exhaust System, and it is a great match. The exhaust sound is quieter than the OEM product, the exhaust pressure is good, and when the Torque is applied, it really extends well. By the way, Intake is self-improved from NORMAL by 71CC bore up, and it marks 84km/h on flat road, 78km/h up road, and 94km/h down road by using Eye Net Exhaust System.

Of course, it is not only the performance of the Exhaust System, but it is a product that can demonstrate sufficient Potential compared to other companies' products.
Moreover, the cost performance is the best, and we can't use a bad, expensive Chamber, because it is a consumable product. Therefore, I Net products are the best in terms of cost performance, so I have decided to replace the exhaust system.
It's really helpful because I can replace it without hesitation. 。 We intend to use it in the future.
The following are some of the improvements that could be made in terms of design.

(1) Stainless Steel decorative winding is not necessary (it's contrary and tacky), Black or Color.:One solid coat of Gray is fine.
As a decoration of Exhaust System ai net I think it would be cool if there was a heat-resistant PlateLogo.
I hope you will go ahead with branding because the product is good. View detail

ai-net

02 Sep 2022

OEM Type Exhaust 125CC Correspondence

Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA

Japanese Webike user

4/5

NORMAL style Exhaust System

Give up playing Normal muffler
Changed to NORMAL style Exhaust System
Installation went without a hitch and took less than 30 minutes!
I appreciated that there was no difference between NORMAL and LARGE in both volume and sound quality! View detail

ai-net

18 Aug 2022

OEM Type Exhaust 125CC Correspondence

Japanese Webike user

3/5

The packaging was very good, but ...

The packaging was careful and secure. but some rust was visible. A little bit.
So I applied a little rust remover and it worked fine.
It needed a little work, but performance and other things don't seem to be a problem.
We feel this is a good product for those who are particular about Normal look. View detail

ai-net

25 Aug 2019

OEM Type Exhaust 125CC Correspondence

Japan User(translated)

4/5

Exactly to the NORMAL crowd!

The exhaust that corresponds to the OEMExhaust System to Bore up as it is Exhaust pipe is a little thicker and a little louder than NORMAL It's not a good idea to have a large size It's not bad for the NORMAL group I think it's a love story
The price is cheap and the Cost performance is high! There is only one drawback, the Heat Guard of Plating is attached, but it is a pressGold type There are some warped parts in the moldings that seem to be of poor precision View detail

ai-net

06 Jul 2019

OEM Type Exhaust 125CC Correspondence

Japan User(translated)

3/5

It rusts

Used for two years It still rusts Also, exhaust leaks at Exhaust End sooner or later The quality of the iron and welding is not good The performance is not bad so it would have been nice if it could have been used for a long time, but it's a shame View detail

ai-net

19 Apr 2019

OEM Type Exhaust 125CC Correspondence

Japan User(translated)

3/5

It doesn't seem to be possible for a car with a stroke up

I thought it would be possible to install it on a vehicle that has been stroked up to 125cc! Monkey engine can go up to 125cc with only the bore ?
The packaging was in good condition, the warranty was included, and the accuracy of the Asia manufacture is better than before However, the quality of the materials still seems to be poor and there was rust floating in the thin areas of the paint
View detail

ai-net

14 Apr 2019

OEM Type Exhaust 125CC Correspondence

Japan User(translated)

5/5

Too costly!

I was riding a GORILLASpringCollection with 88cc bore up But the previous exhaust system was too noisy, so I replaced it with this product First of all, I was surprised by the solid construction of the OEM parts? Also, I was very particular about the Normal look, so I gave it 100 points I was satisfied with the sound of the NORMAL sound Anyway, it's a very, very good value for money The unbalance with the price is extraordinary View detail

ai-net

21 Jan 2019

OEM Type Exhaust 125CC Correspondence

Japan User(translated)

4/5

Quiet but inferior to the DAXExhaust System

I put a Chinese DAXExhaust System on my Bore upCUB and I like it Bore upMONKEY
I bought it expecting the same etc. effect, but the sound quality was pushy
Installation accuracy is fine and looks good View detail

ai-net

09 Jul 2018

OEM Type Exhaust 125CC Correspondence

Japan User(translated)

4/5

If OEM looks Custom Custom!

Attached to 75cc4LMONKEY.
The texture of PlatingGuard is good, the heat resistant paint is also firm.
Welding is not beautiful, but because it plays a full role
It is not a problem privately.
And it is very quiet, even if this Level is missing, it is difficult to start up in residential area if it is a straight type Exhaust System
The warmth at midnight is not a problem.. View detail

ai-net

12 May 2017

OEM Type Exhaust 125CC Correspondence

Japan User(translated)

4/5

I-NET reliable

I am using it for GORILLA I purchased it because I wanted to stick to Normal look It is possible to correspond to Bore up125 It is good Missing is good You can attach without processing It is worth more than price Before going to luxury goods It is especially Recommendation for Beginner View detail