Reviews
Because I exchanged the Exhaust System for the first time
I tried it because it arrived today
The model is CD 50
When attaching to the Bracket of the CD 50, it will not match the hole and the Exhaust System interferes with Brake
Forcibly pushed inwards and a gap of about 1 mm was available but is this such a product?
Perhaps it is incorrect to put it in the wrong way but it is surprisingly utopia
View detail
I used it before, but this time …
As well as lowering the volume, as a Baffle to the resistance of the exhaust system that is too loose I have been using it
The item I received this time has a blow hole in the weld area (Automatic machine restarting?) I was curious about it, so I wrote about it
View detail
Accuracy is bad.
Four months have passed since installation.
First, regarding installation,
No matter how many times we aligned it is impossible for an exhaust pipe
It may take a long time to use. Since the flange is also inferior in punching accuracy, it is warped, so a burden is placed on the stud bolt when tightening, since the state where the Nut bearing surface is hit is also bad, the tightening feeling is not good. Moreover, the silencer insertion part also loosened about 2 months because there is no strength, and the silencer got rattled.
As for countermeasures, accuracy of exhaust pipe can be welded by occupational handle, so it was cut and fixed. In the plug-in part, put a notch in the side of the silencer and tightened with the muffler band of Keijima. Those who have an environment to process can take measures, but it is natural to not be able to process normally, so those who are bought need preparedness. It may be that I happened to have dropped out, but in general the manufacturer here thinks that accuracy is not good.
Performance is power down, saying clearly with a ponding because performance is lost and low speed is lost for this hand. We set up Daytona's exhaust interference type inner silencer in an exhaust pipe and replaced the 58 pie baffle with the attached baffle to be satisfied with both volume and performance.
Even from the viewpoint of cost, since it became more than the list price for processing and purchasing additional parts, I think that if it is price as low as Yahoo auction's low price muffler, I can compromise. Honesty
I think that there is no difference between Yahoo auc low price muffler and precision texture.
View detail
The diameter Φ is bulging on the Silencer side!
We installed FMF Silencer together, but the Socket section of Exhaust pipe (Insertion portion) There was a sense that there was a feeling that it was inflating the exhaust leakage and promoting exhaust leakage, and it was full of discomfort ,,,
I asked the ironworks to process it, but thought that I should make it a standard exhaust pipe
View detail
It is the worst
After confirming whether it is attached to the CBR 1000 RJ Japaneseese specification of MODEL for 15 years, I got an answer that it can be attached without problems.
Since the real thing arrived, as you start working, the diameter is totally different too. I am worried that I can install without problems with this, but I do not attach at all even if I go on fixing work with the thought that it is arriving. Completely exhaust leakage condition.
It is regrettable whether the thing which I bought with paying gold which is never cheap waited for delivery for more than one month is such a thing. I was disgusted.. In the future it is a thankful experience to buy a reliable Manufacturer's Exhaust System with a Review.
View detail
Mounting on DELTA 4 Exhaust System. (Purchased with Webike Rakuten)
【What made you decide the purchase?】 Until now it was too much firing in the explosion so purchase.
【How was it actually used?】 As for the performance, the explosion became quiet, it was good, but since the rushing is getting worse, I am a bit puzzled on the rise.
【Was it difficult to install? (Hard parts case)】 The installation itself is painted with a heat-resistant liquid Gasket, returned to its original state and dried. it's simple.
[Is there anything I was disappointed about?] If there is a problem, the TIG welding of the three Pipe of goods is miscellaneous. Although I went around for a while, the way to put out waves was like an amateur, and it looked like it was not amusing when I could get here.
【Hope for Manufacturer - Please tell me if there are any improvement points】 Since it is exhaust of Single especially, how to draw a weld bead that is likely to break due to aged deterioration is uneasy and I am scared when it can be taken.
【Have you compared items?】 There is none.
[Others] Let's welcome the craftsman to weld at least visible places.
View detail
Fits: HONDA CB50 S All models, HONDA CB50 All models, HONDA CBR250F MC14 All models, HONDA CBX125F All models, HONDA NSF100, HONDA CBX125 CUSTOM All models, HONDA XE50 All models, HONDA XLR250 R MD16, HONDA XE75 All models, HONDA XLR250 R MD22, HONDA XLR250 R-BAJA MD16, HONDA XLR250 R-BAJA MD22, HONDA XR100R, HONDA XR250 BAJA MD30, HONDA XR250 MD30, HONDA XR100MOTARD HD13, HONDA XR250MOTARD MD30, HONDA XR250R, HONDA XR80R , HONDA XR50 MOTARD AD14 All models
It's cheap, is not it ~
It is just for looking the same as OEM, how to collapse is a bit different.
I think that it is good to use it as SettingTool for those who carefully care about the pipe head of Exhaust System.
View detail
Fits: YAMAHA FJR1300 A, YAMAHA FJR1300 AS, YAMAHA FZ-1 S 3C3G, YAMAHA FZ-1 FAZER 3C3G, YAMAHA FZ-1N 2D1A, YAMAHA FZS1000 S, YAMAHA FZS1000, YAMAHA MT09 1RC8, YAMAHA MT09 2DRC, YAMAHA MT09 A 1RC8, YAMAHA MT09 A 2DRC, YAMAHA MT09 ToRacer 2SC8, YAMAHA TT250 R RAID All models, YAMAHA TT250 R All models, YAMAHA WR250 R 3D71-79, YAMAHA WR250 R 3DA-D, YAMAHA WR250 X 3D71-79, YAMAHA WR250 X 3DA-D, YAMAHA YZF-R1, YAMAHA YZF-R1 S
Slightly bad
It was badly made from OEM and it was a universal product so the diameter was also slightly different, so I bought it but eventually I reused OEM. We recommend purchasing OEM Product. View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000
Design is good - - -
I installed in L6.
I decided it only by Design, but was sputtering at the time of cutting?
The painted surface is terrible.
It is a place I want you to do somehow even if you raise it a bit more.
View detail
Fits: YAMAHA Super JOG-ZR 3YKB, YAMAHA JOG 00, YAMAHA JOG 2-Stoke, YAMAHA JOG BJ 5XN, YAMAHA JOG ZII 5EM・5BM, YAMAHA JOG ZII 5PT, YAMAHA JOG ZII 5SW, YAMAHA JOG SPACE INNOVATION 5EM・5BM, YAMAHA JOG SPACE INNOVATION 5SW, YAMAHA JOG SPACE INNOVATION 5PT, YAMAHA JOG SPACE INNOVATION C 5EM・5BM, YAMAHA JOG SPACE INNOVATION C 5SW, YAMAHA JOG SPACE INNOVATION C 5PT, YAMAHA REMOTE CONTROLLER JOG 5PT, YAMAHA REMOTE CONTROLLER JOG 5SW, YAMAHA REMOTE CONTROLLER JOG 5EM・5BM, YAMAHA Most of the JOG(2-Stoke|50cc) whose OthersFrame starts with "SA"., YAMAHA JOG remote control Z II, YAMAHA JOG, YAMAHA SUPER JOG ZR
Only looks.
Performance does not up. Although the number of revolutions is up, even at the highest speed setting, it does not differ from OEMExhaust System at all... Only the sound seems to be fast.. "I think that it is the sound, Exhaust Chamber of just appearance! View detail
Fits: HONDA MONKEY, HONDA GORILLA
This is terrible
First of all, Bead of the weld is as dirty as I thought it was an amateur finish.
Evacuation leak & Rust came out from the welding part.
The hole position of the attachment flange on the waist side is required for rework after the detachment Lame.
The sound is pretty good so it's too bad, but it's a few skewed cutting exhaust system, so it's an Exhaust System that you can consider re-purchasing when you think about it and Cost.
View detail
Stomach belly
The dress is nice, but first the sound is amazing. With a feeling like a straight pipe,
I will look back on most people.
Since there is no longer a car height, get off when you step up and down the step of ordinary level
I have to hurt.
The performance drops to such an extent that it can be experienced, that fuel consumption is 1. It will fall about 50%.
For the sound, I make Inner silencer and narrow down the final aperture
I made it silent, but I forced him to shut up with a brief Exhaust System
I gave up on giving up the high speed range (Lol)
But it's toughness that it will not break even if you hit GunGun and what is cool
I have been using it for seven years with goodness.
Sounds will do something, and the performance and fuel economy will be in good shape to Chara
I can do it. People who want to compatibles have as long as possible a pipe exhaust system
You should choose.
View detail
It gets burned and the color falls..
For Excent pipe's appearance Accent and Protection to the part where the foot hits Vantage - I purchased Black.
It is satisfactory in terms of price, it is easy to buy because it is a selling price.
After arrival, I immediately wrapped it around the Exhaust pipe and there was nothing in the weeks,
When the time passed after 2 months - - Due to deterioration due to heat if you notice it
The color faded and the part which became White broke as the material itself became brittle.
After that, the part which faded was painted with heat-resistant paint and regenerated, and it became brittle
Parts are purchased again and rewound, in areas where legs etc. are particularly prone to deteriorate
Heat Guard and others are included to surpass it.
Because it is Reasonable in price, we recommend it for those who use it as a consumable item
, I think it would be better to avoid those who want to choose solid objects or nervous one.
View detail
K-FACTORYK-FACTORY Titanium Bracket for Exhaust System
K-FACTORYK-FACTORY Titanium Bracket for Exhaust System
I bought it with K-FACTORY EX tube. It was Bracket for Exhaust pipeUP which can not be installed at Rear suspension.
Notice also on Manufacturer's website so be careful!
View detail
Fits: SUZUKI SKYWAVE 250 CJ46A, SUZUKI SKYWAVE 250 CJ45A, SUZUKI SKYWAVE 250 CJ44A
Pushing Age Quantity : 2pc
Pushing is cool with StyleDual Silencer
It is a bomb sound that is not hesitant, it is high speed, high rotation and the ear hurts.
End shape is bad and Baffle can not be installed either
Inefficient installation is required
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG
It is cool though - - -
I bought it with a Hand Bent style line and a thick Exhaust pipe while it was a low price, but the Exhaust pipe was attached to a place where Large huge long longitudinal streaks that seemed to have attached during processing were very conspicuous. (4 pieces together)
It will become more conspicuous as baking enters.
The middle Pipe also had uneven parts that had nothing to do with bending. I am convinced myself that it is a scratch that will inevitably be attached at the time of processing. (WEBCatalogue does not have such scratches)
Vertical lines themselves are not conspicuous in the far eyes, the overall shape is also good, it's quite lightweight so I'm enthused.
Manufacturer special price after I bought (87,000 yen?) Although it was sold at, it is thought that it is a convincing commodity if it is the Gold amount
To. Large I liked my Brand but Quality
It is - - -
View detail
Only looks
I bought sp Tadayo's development blog and I bought it because Impression is good, but I regret saying it clearly.
Turning on the engine you are talking about will make a strange sound with Tingly Chillin. The Instruction Manual says Material problem.
Our WR250x is a combination of fmf Q4 and the Box of Para.
My friend rides on fmf Park Core and Mega bomb's WR 250x, so apparently the Full Exhaust System of fmf is Torque fully and there is Punch. On the development blog I have written only Parenthesis good things, but after all it is a price. Although I am a bit expensive, I regret it is Large that I should have bought Mega bomb.
View detail
Fits: HONDA glom
The royal road! YOSHIMURA!
If you are doubtful about Slip-on Silencer, let's choose the Full Exhaust System.
Because it is YOSHIMURAExhaust System of the corner
For Normal engine Injection setting etc etc. There is no necessity at all.
My EngineSpec. Mukawa SStage, Mukawa river BigThrottle (Power Filter) However, the setting in FI con is (F). Correction is +2 (7) It's patchy..
You can remove Baffle at Hexagonal Wrench.
My EngineSpec. In the case of Power, Power comes out,
In the case of public road use, there is noise and low speed Torque reduction, so if you like
View detail
It's all right. You get what you pay for. It's a fairly cheap pipe, I bought it to get my 74 ct70 (with 88cc big bore kit) on the road. easy to fit, looks like a stock pipe and is quiet. But less then 250km later one of the welds split and one of the
It's all right. You get what you pay for. It's a fairly cheap pipe, I bought it to get my 74 ct70 (with 88cc big bore kit) on the road. easy to fit, looks like a stock pipe and is quiet. But less then 250km later one of the welds split and one of the heat shield mounts broke free. Had it simply welded back up, annoying that it was not welded properly to start with but what do you expect for 50 bucks. If you are after something to get by with and are not afraid for a few patch welds here and there, this it the ticket. But if you are after something maintenance free, it's best to spend a little more cash and got with a better brand with better build quality. View detail
Fits: KAWASAKI Z250 (2013-), KAWASAKI NINJA250R, KAWASAKI NINJA2 Helmet50R ABS
Unfortunately - - -
The item that arrived was a defective item. It was attached to the Manufacturer inspected Mark firmly - - -
How does YOSHIMURA respond? - - -
It is very disappointing because it was expensive shopping for me.
View detail