Reviews
Style is good, but it's too expensive
It was a well-known shop, so it was expensive, but I bought it!
There was no problem with the accuracy of the installation, but there was no problem with the accuracy of the installation point on Tandem stay The welds on the brackets are too shoddy, I'm honestly disappointed!
I think I made a mistake in purchasing it
View detail
Fits: HONDA CB400FOUR (air-cooled), HONDA CB400FOUR (air-cooled)
Quiet Exhaust
Exhaust arrived safely to me in Australia well packed in a very big box (box was really too large for the purpose). It was easy to fit to the bike but when I had to remove it some time later, I found it was quite rusted inside so would not rate it highly at all and don't think it would last long with every day use. Exhaust noise was also very quiet, perhaps too quiet for some, with no way to remove the baffle. Overall, I was not really very happy with this product as it it differently made to a low cost, reflected in the actual price of the item on the website. View detail
Fits: YAMAHA TRACER900, YAMAHA TRACER900, YAMAHA MT-09, YAMAHA XSR900
Cannot be installed on a RacerGIVI full Pannier (Required processing)
It is not possible to install in the RacerGIVI full Pannier
I have a GIVI PLR2139 installed, and this Muffler silencer is Pannier Bracket (Attached to Tandem Footpeg) It is not possible to install it because of the interference with the It is in contact with Bracket I gave up because I couldn't shave any more, so I installed it
Also, if you put your foot on the Tandem Footpeg normally, the shoe will melt against Silencer
This is in spite of the fact that I checked the above two items with the Manufacturer in advance
There is also adhesive overhang on the Silencer
If it wouldn't stick without processing, I would have used another Exhaust System
I like the way it runs and sounds without feeling a drop in low speed torque at launch
To be honest, I'm quite disappointed as I was a favorite Manufacturer
View detail
Fits: KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX
Treatment of the edges
To the Pannier case of KAWASAKI ninja H2SXSE+'s OEMOption Material is Material:Carbon but simply Cutting with the bottom of the Pannier case aligned with the bottom of the Pannier case It is only in the state of being done
The accuracy of cutting is not so much, and in addition, there is a frayed Carbon fiber, which is attached to the This requires a little bit of work, as it requires reinforcement (gluing the edges together so that the fraying doesn't spread) with the adhesive of It is
View detail
It's a product that only looks good
Japanese Vehicle Inspection CorrespondenceSlip-it can't be helped because it is on Silencer, but the sound quality volume and OEM Exhaust There is little difference between the System and the
My impression is that this is a product that only looks and saves weight
Translations (Enter here for the Instruction Manual that does not even come with the exhaust I can't say it's easy to install, such as with the Valve wire
View detail
Bad sound quality
Products imported and sold by goods, which are manufactured by a Taiwanese manufacturer called EMGO Yes
The Inner silencer that comes with is poor sound quality There is no bass at all and a high tone stands out The volume is also quiet
Idling is "PassPassPass, In mid-rotation, the Pepe Pepe At high RPM "Bichichi Bichichi It sounds like
You should buy it with the assumption of processing, such as installing another Baffle
It is indeed impossible to run without Inner Silencer in terms of volume and performance
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
break down ((
Very high quality workmanship and beautiful detail. Installed, fixed, everything was fine. But after driving a thousand kilometers, I noticed some extra overtones from the exhaust. Inspection showed that the mount broke off, apparently from vibrations. It is a pity that such a high-quality part (in appearance) broke down after a week of use. Very high quality made, and beautiful detail. Installed, fixed, everything was fine. But having traveled a thousand kilometers, I noticed some extra sound from the exhaust side. Inspection showed that the mount broke off, apparently from vibrations. It is a pity that such a high-quality part (in appearance) broke during the week of use. translated by Google Translator View detail
Fits: YAMAHA VIRAGO125, YAMAHA VIRAGO250(XV250)
U-CP Stainless Steel Slash Cut Exhaust System
I bought these exhaust pipes for my virago and I found a problem. They are easy to put on but the bike has lost power. With the first gear, the motorcycle is not able to climb a hill. With the original exhaust pipes I do not have that problem Does anyone know why? View detail
Fits: HONDA JOKER90, HONDA JOKER90 [Joker]., HONDA JOKER90 [Joker].
Iron Burial
The muffler is of medium quality!The outside of the box is an aluminum pipe itself made of ordinary iron covering thermal protection.Its quality is low as it can be seen in the picture after two months of use!The overall score of two stars because of the full does not match the price quality!At a cost of more than $ 300, the products must be at least stainless steel, and preferably from titanium! View detail
What is this roughness?
kFACTORY
Texture is too bad!
As you can see in the photograph, the lower half is shark skin
I thought it was a moment when I opened the bag
I purchased thought that shape and appearance are good but this is bad
Before installing a new SilencerPaper
I am looking for a good point but I can not find it for now!
5 Meter Parenthesis may be nice if you see it from a distance!
It is a tough evaluation
I think that I will not buy the product of kFACTORY anymore but judge by kFACTORY's item selection person himself
View detail
Fits: KAWASAKI ZX-10R SE, KAWASAKI ZX-10R SE, KAWASAKI ZX-10R, KAWASAKI ZX-10R
Looking at quality - - -
Attached - - - Just to lighten up
Touching, thick paper - - - doubt
There is no easy repair method with Wound - -
Just look and lightness - - - doubt
Sound is noisy another sound
If you do not like existing, why do not you try attaching it?
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Preferred Silencer shape.
So both sound quality and volume are similar to Normal silencer. (Maybe quieter than NORMAL?) Since the sound quality of the Normal muffler is really good in Z 900 RS, it seems that Slip-on Silencer exchange is not essential, but I wanted to give a Custom feeling but I exchanged it.
As before, there is no punch power on the Sound side, sound quality is also attached to the end cap, (Excuse me) As it sounds like it, I assembled it in the removed state.
If you purchase K-FAC, would you say that only choosing the shape of your choice - - -. Others Because performance can not be hoped for in terms of performance, volume sound quality Up, it is safe to buy with feeling that Parenthesis will do better.
View detail
I am dissatisfied.
I bought Automatic magicInner baffle but when I put in Baffle 5mm Silencer Insertion depth is not enough enough, although there is a silencing effect, the price is too high I thought other Inner baffle is good. View detail
Are you doing surface treatment?
From the consideration of a number of CABTON Exhaust Systems, the final is Japanese Vehicle Inspection Correspondence Although I purchased it as a decisive factor, from the state of opening the seal, there are multiple like dents like circle spots on the whole. This is a Level of whether it is a Recall target View detail
Fits: SUZUKI GSX R 1000 (17-19)
Installation accuracy is bad.
Usually you can install it by just floating the radiator
I could not install it unless I removed the radiator.
Because Exhaust has come down too much
Under Cowl Left Exhaust hits if it does not cut under.
View detail
Super-explosive sound
It turns neatly upward, but there is not a low-speed Torque because it is coming out too much. Characteristics do not match in Mini bike Circuit. It would be nice if you keep it fully open like Minimoto ... View detail
Fits: KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1100
It looks good
One color purchased Black, but since the Flange is out of place during installation, it is easy to get scratched. (I regret not having cured).
2 I chose this product considering maintenance, but because I also divide the Exhaust pipe part, exhaust leakage. (Although I wrote that there is Mark according to the manual, I did not find it. Liquid Gasket in use. )
3 sound quality, I chose Silent's Baffle, it was a damn sound. (It is far from the sound seen in the movie. Video Baffle may be Medium. )
4 However, I like it looking pretty.
View detail
Delimiter degree
- Rust inside the Exhaust pipe
- Exhaust Guard Rust behind
- Exhaust Pipe Guard thread, 3 out of 3 Quantity : 2pc. Set was crushed
- Can not be installed unless the Exhaust Pipe Guard is extremely deformed
- The gap between Rear tire Side wall and Small finger degree
- The distance to the Oil tank is getting closer.
I thought about returning in the above point, but the procedure seems to be difficult,
Wound arrived lightly when fitting, so forcibly installed.
If you continue to ride, even if you make a price difference four times, it is more secure to buy an OEM.
View detail
Fits: Others
It was useless.
The appearance seemed to have some degree of silencing effect - - - I think Idling is slightly down the volume, and I think that there is little change after that. View detail
The deformation of Pipe
Although it is an exhaust system of 2-pieces Structure, deformation was intense both on the side of the insertion part and on the side of the silencer and it was possible to install it by forcibly turning after forcibly pushing in. Manufacturer inspected it, but it is impression that it is still made of Large land due to being a good product.
Wae Big's response was good with Smooth Tanaka Shokai's quality was disappointing.
View detail