Motorcycle Motorcycle Parts Reviews

Filter

Write a review and get Webike Points!

Reviews

Motorcycle Parts Tank Pad Clear all

J Trip

13 May 2024

Aluminum Swing Arm Hook Bolt

Fits: APRILIA RSV1000 Series, DUCATI Panigale 899., APRILIA RS125, APRILIA RS250, DUCATI MONSTER S2821, TRIUMPH DAYTONA675, YAMAHA , APRILIA SL750

Japanese Webike user

5/5

Easy to use

I use it for STAND and it is safe to use without gapping. View detail

Handlebar Bracket USB Port Kit for DAX125 & Monkey 125 (JB03)

STRIKER

13 May 2024

STREET CONCEPT Full Exhaust System

Fits: YAMAHA YZF-R25

Japanese Webike user

4/5

Ideal for lightweight

Installed on 8BK-RG74J.

No loss of horsepower with regulated engines = can be converted by replacing the Exhaust System. but there was not much change at the JMCA, where the regulations are tighter.

In the 250cc class, the Large body only varies by 1 to 2 horsepower no matter which Exhaust System is selected, so this Exhaust System is recommended for weight reduction purposes.

As for the sound, the 8BK is almost 90db OEM, so you hardly notice any change in volume, but some parts have a thicker sound depending on the RPM.
In terms of sound quality, I think you would feel more change with Planus or WR's Slip-on Silencer.

The quality, however, the accuracy of the front pipe was quite poor, and it did not fit neither the Engine nor the Center pipe, so it had to be installed while bending it with Lever.
Although less expensive than other Full Exhaust Systems, it would have been nice to have a more accurate product.

When installing the Silencer, it is recommended to temporarily fix the Exhaust Band and Bracket and then install the Bracket on the body of the vehicle, as it is quite difficult to install the Exhaust Band if you follow the Instruction Manual.

Also, although not mentioned in the Instruction Manual, it was necessary to change the Wiring position of the O2 Sensor.
The OEM position is fixed in front of the Clutch cover, but once removed and placed through the rear.

Although it has a few drawbacks, it does not look like other people's and can be lightened to a large width, so I think it is recommended for people who are visually oriented. View detail

[DAYTONA x AC SANCTUARY] RCM Concept COZY Seat [COMP]

POSH

13 May 2024

Middle Weight Bar End

Fits: SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI GLADIUS650400, SUZUKI GSX-S1000F, SUZUKI SV650, SUZUKI V-STROAM250, SUZUKI BURGMAN400, SUZUKI V-STROAM, SUZUKI GSX-S1000S, SUZUKI GSX-S1000, SUZUKI GSX250R, SUZUKI GSX-S1000GT, SUZUKI V-STROAM1050, SUZUKI V-STROAM1050XT, SUZUKI V-STROAM1050DE, SUZUKI V-STROAM650, SUZUKI V-STROAM650XT

Japanese Webike user

1/5

First time is tough.

If you are replacing the Bar End for the first time, be careful.
I guess it depends on the type of car, but in my case (2023 KATANA),
First, the Bolt that is included will not be used. Also, most of the included parts will not be used.
I use the OEM Bolt, but sadly it does not fit this Bar End.
I think it is a lack of understanding of the structure of the Bar End itself, but at first I used a part like the Adjuster that came with the Bar End without understanding it, and the Bar End did not come off.
We ended up taking it to a Motorcycle shop and decided to remove this Bar End.
Since the product photo does not show the attached parts, I will buy the actual product at the Shop in the future, even if it is a little more expensive, instead of using Webig. View detail

«
1
2
3
4
5
6
7
8
...
5022
5023
»