Reviews
For a dress-up look!
[How is it used?
Used for gpz900r.
Was the one you received as per Image?
Yes.
Was the installation difficult?
It is easy as long as the tightening Torque is correct.
How was your experience with it?
Ideal for dress-up appearance.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
light
LEDs are bright and highly visible because they do not have uneven colors like Halogen.
It is lightweight and durable, and the Body is thin, so it does not affect cars with RearCamera.
View detail
Installed on a Z400 without blinker position.
[How is it used?
Installed on a 2022 Kawasaki Z400 without blinker position function.
In addition, the BlinkerLED and hazard lamp functions were added to Z400 at the same time as this product.
Blinker position and Hazard were added as necessary to improve visibility from the car.
Was the one you received as per Image?
As per Image.
Since we knew that Waterproof performance could not be expected, there was no particular Shock.
Was the installation difficult?
Since this product is a FOR VEHICLE product, waterproof performance is not expected at all.
Therefore, it is necessary to put away the Body in a place where it will not get wet as much as possible.
In Z400, I decided to put it under the MainSeat where there is enough space and wiring is still easy to do.
Since wiring the wires coming out of this product to the Front Blinker is quite time-consuming, we recommend that you allow plenty of time for this work.
The instruction manual is quite detailed, so if you read it carefully and take on the task, you should be able to install it without problems.
How was your experience with it?
The blinker position was lit well because I was able to wiring exactly.
Note that this product could be used with a home-made Hazard circuit using a rectifier diode without any problem.
In that case, this product is downstream from the Hazard interrupt circuit. (The line really in front of the Front Blinker) Interruptions to the
[Included Parts:were they on?
In Hemp palm pack
Electro Tap (Wiring Interrupt Connector)
[Was there anything that disappointed you?
None
Point and hang of installation
If you have a soldering iron and a wire stripper, it is better not to use the Electro Tap to prevent a trouble such as not energizing.
View detail
thin and light
It is a LED license plate with full-surface light emission and has good visibility without uneven color like Halogen. It is light and strong, and the body is thin, so there is no influence on the car with RearCamera. View detail
European style
The front blinker can be positioned to give a European style look, and there is an OnOff switch so you can always go back to normal. View detail
The brightness is sufficient.
I put it on the Swing Arm of REBEL250 and used it together with the Switch of Emon to turn it off during the day and on at night. Because the brightness is bright enough and blue is a fantastic color, it is conspicuous. View detail
is it worth it...
well,after fitting it which is really easy i noted there is no easy way to fit the rear lamp,it would be easier and cheaper(especially here in the uk,as we pay a lot of import tax)is to modify the original rear fender which is easy.. View detail
Slim
It is a change from other ManufacturerFender Eliminator It becomes very Slim and I am satisfied with Large
It would have been even better if the RANs light was included
A little bit cheaper would have been better
View detail
I am satisfied
I've been wanting to add some SquidRing-like lighting around the Headlight, but the Lens' I found a side issue LED that I had given up on because it was too much to take inside, but I found a side issue LED and ordered it It was easy to install because of the Double-sided Tape I was worried about the sides I was worried about the side view, but when I turned it on, it was brighter than I expected It's a great product I'm also glad I bought it because I could use a lot of tape View detail
Inexpensive and easy But it is what it is
I bought it from another site
A friendly Instruction Manual is included for installation, which is sufficient to help you get the job done
The Electro Tap is also included in the kit, so if you buy it, you will have no installation problems
If you store the Body under the Seat, you don't have to worry about the rain It was not
The difficulty is probably inherent to the vehicle body, but you can't just misinterpret a signal in Noise and suddenly Position sometimes disappears Then it comes back in about a second, so there is no problem with the function
However, if you are concerned about it, you may find that it disappears even though you have not entered a directional instruction, so if you are concerned about it, you may want to contact us after installation I think it's best to monitor your progress
As an addendum, you are instructed to cut the Blinker line, but if it's a Motorcycle, you can use the Since it doesn't take much time and effort, I thought it would be good to make a branching Harness by yourself with Connector I think
View detail
If you buy it in Set, the capacity under Seat will increase to Large width
Refreshing appearance, but the storage capacity has increased significantly. Because the vehicle is old, it is the best because you can stack more tools and rain gear. I think that purchase with Set is definitely better View detail
For ETC installation
Until now Cut and use OEM's Fender
However, in order to secure Space of ETC installation,
Because the price is cheap for this hand Fender Eliminator
I bought it. Thanks ETC can also be installed
Besides Rain jacket and plastic bottle (500cc) There are several
I got a space to enter.
View detail
Bolt
Since Bolt is dirty and shabby, I replaced it. The price is also cheap, and with the Instruction Manual, you can exchange Bolt of Clutch cover without hesitation. It is great if you can choose other colors. View detail
There are gaps, too
I'm almost satisfied.. I will enter quite a bit.. If you do your best, you can also install Rain jacket. Reserver tank protrusions are in the way. If it is not there will be more. 18 in on the back side. Regrettably, it is getting shallower so as not to rub. 17in. If it is premised, the back side should also be deep.
I should not let any strange partitions be lost. I am considerably remodeling myself and increasing the capacity, but I think that it is good to be able to make Large capacity inexpensively.
View detail
Secure a truckload for the time being
It is an incomprehensible picture, but it is from the bottom.
The rear half of the Rear Fender, which is usually Arch shaped, becomes flat, and its space becomes the cargo room.
However, I found that it is an almost useless Level if you put Wiring such as Tail lamp alone with this alone.
First half expansion kit (17 "assumption) I think that I will buy it as soon as possible.
For those who only want to be Fender Eliminator, it is also recommended for cospar.. Activeetc. Since few thousands of yen cheaply fits.
View detail
Is it reasonable for the price?
It is the lowest price among GPZ 900 R's Fender Eliminator.
I think that there is no problem if there is technology that OEM's Fender can be removed smoothly.
Space to put Small objects (Increase further with Inch down & Expansion Kit) So, if you are looking for appearance and practicality. It seemed like there was no instruction manual.
View detail
There is a gap
It was better than what I thought.
I made it to Black
The feeling of tightening increased to the highest.
But, as there is a little gap with Frame, the more nervous one.............
View detail
Since it was the Fender less which processed an authentic positive one, it changed. Since the Touring etc. were seldom carried out, not a large capacity type but the cheap thing was chosen. It was not conspicuous with a Black and was finished in good touc
Since it was the Fender less which processed an authentic positive one, it changed. Since the Touring etc. were seldom carried out, not a large capacity type but the cheap thing was chosen. It was not conspicuous with a Black and was finished in good touch. The degree of setting angle of a Number is also an angle which is not disagreeable. Although attachment was easy, removal of the Cowl, etc. took time. View detail
Although Fender less KIT of the other company was used, a specification change was made to compensate for inch[ 17 ]-izing. Since it was a Fender less only by the side of a Tail lamp until now, when the automobile inspection certificate was put in, there
Although Fender less KIT of the other company was used, a specification change was made to compensate for inch[ 17 ]-izing.
Since it was a Fender less only by the side of a Tail lamp until now, when the automobile inspection certificate was put in, there were only few Spaces.
It equipped also with the escape KIT collectively and has secured the big Space also beside the Battery this time [
].
Even if it puts in a Rain jacket etc., it is still generous, and if it is a day's trip Touring, it is empty-handed and can go.
The crevice between the Seat frame after
attachment and a Fender less has been made.
Moreover, between an extended Kit and back Fender lesses is the same.
although I think that there are some errors by individual specificity, since the same contents also as in play [ of other persons ] are indicated, some crevices are unavoidable -- it is the touch called !?.
By the mud etc. which had splashed entering, since the crevice between the Fender lesses of the
escape KIT and back is so, it puts a Sponge and is fixing it with double-stick tape.
A Sponge portion (it is visible on a Tire) is intelligibly taken out with a picture, and the photograph is taken.
Since the crevice between it and a Seat frame is not likely to have a big problem for the moment, it is not coping with it.
Although it may be an impression which is not recommended as writing in this way, even if UP of a useful load is based on this, it is attractive enough, and since it is some crevices, I think whether it can respond enough with the device carried out just for a moment.
In the direction formed into
17 inch, or the direction examined from now on, I think that it is an Items which we can recommend to you.
View detail
The License light of the Car was equipped. Compared with incandescence of the NORMAL, it is really bright. It passed, although it was not bad even if attached to the Position, and the automobile inspection was received, attached to a License. b
The License light of the Car was equipped.
Compared with incandescence of the
NORMAL, it is really bright.
It passed, although it was not bad even if attached to the
Position, and the automobile inspection was received, attached to a License.
by
reference -- polarity -- ++ -- it is -- and, probably Kelvins are about 6000k.
-- you are somewhat pale -- I think ? kana.
View detail