【AMC】Blinker Position Custom Kit Review
Inexpensive and easy But it is what it is
I bought it from another site
A friendly Instruction Manual is included for installation, which is sufficient to help you get the job done
The Electro Tap is also included in the kit, so if you buy it, you will have no installation problems
If you store the Body under the Seat, you don't have to worry about the rain It was not
The difficulty is probably inherent to the vehicle body, but you can't just misinterpret a signal in Noise and suddenly Position sometimes disappears Then it comes back in about a second, so there is no problem with the function
However, if you are concerned about it, you may find that it disappears even though you have not entered a directional instruction, so if you are concerned about it, you may want to contact us after installation I think it's best to monitor your progress
As an addendum, you are instructed to cut the Blinker line, but if it's a Motorcycle, you can use the Since it doesn't take much time and effort, I thought it would be good to make a branching Harness by yourself with Connector I think
Responses
Other reviews
Installed on a Z400 without blinker position.
[How is it used?
Installed on a 2022 Kawasaki Z400 without blinker position function.
In addition, the BlinkerLED and hazard lamp functions were added to Z400 at the same time as this product.
Blinker position and Hazard were added as necessary to improve visibility from the car.
Was the one you received as per Image?
As per Image.
Since we knew that Waterproof performance could not be expected, there was no particular Shock.
Was the installation difficult?
Since this product is a FOR VEHICLE product, waterproof performance is not expected at all.
Therefore, it is necessary to put away the Body in a place where it will not get wet as much as possible.
In Z400, I decided to put it under the MainSeat where there is enough space and wiring is still easy to do.
Since wiring the wires coming out of this product to the Front Blinker is quite time-consuming, we recommend that you allow plenty of time for this work.
The instruction manual is quite detailed, so if you read it carefully and take on the task, you should be able to install it without problems.
How was your experience with it?
The blinker position was lit well because I was able to wiring exactly.
Note that this product could be used with a home-made Hazard circuit using a rectifier diode without any problem.
In that case, this product is downstream from the Hazard interrupt circuit. (The line really in front of the Front Blinker) Interruptions to the
[Included Parts:were they on?
In Hemp palm pack
Electro Tap (Wiring Interrupt Connector)
[Was there anything that disappointed you?
None
Point and hang of installation
If you have a soldering iron and a wire stripper, it is better not to use the Electro Tap to prevent a trouble such as not energizing.
View detail
European style
The front blinker can be positioned to give a European style look, and there is an OnOff switch so you can always go back to normal. View detail