Reviews
I used it to fill in the riddle.
The Camshaft ChainHousing of the Z900RS Cylinder block has a mystery hole that is not used on this Motorcycle.
The diameter of the hole is 11mm. I have been wondering about this for a while, so I use well nuts to fill in this mysterious hole.
I hope they will continue to do so because it is a product line that raises the level of custom culture.
I used a 9.5Φ C550 with a thin neck, and since the parts are just for decoration, I used an appropriate lightweight aluminum M5 bolt and cap.
Other than the mystery hole for the cylinder block, the Center Stand mounting hole on the Left Side can also be filled with this well nut and M5 bolt since the hole diameter is 11mm.
View detail
Refresh
We replaced it for Refresh to Timing removing Cowl.
There is a feeling of reduced squeaking.
There's nothing wrong with replacing it before it cracks!
The removed items were cured.
View detail
Cheaper than OEM
We purchased more because they are cheaper than OEM!
When they are old, they are hardened and I replace them when they are Rose.
This is a necessary component to prevent Cowl from cracking or over-tightening!
View detail
Less expensive than OEM Parts
[How is it used?
I used it to fix my newly purchased Chinese Cowl.
I bought this product because it was inexpensive and had good reviews.
Was the one you received as per Image?
I purchased For M6, but it is surprisingly Large, so it is somewhat troublesome to extend the lower hole.
Was the installation difficult?
The Chinese Cowl originally has an appropriate hole Size, so the hole needs to be expanded.
The work must be done carefully because it has to be made rather Exactly.
It is recommended because it is easy to use once it is fixed.
How was your experience with it?
It is strong enough to fix Cowl.
As mentioned above, Chinese Cowl would be useful as long as the pre-drilling is done properly. (Actually, I prefer Quick fastener, but...)
Note that the price is surprisingly high when used in large quantities. Still, it is much cheaper than OEM parts.
[Was there anything that disappointed you?
Although the product itself is not so great, the size is indicated as large, but I thought it was difficult to image the size.
I felt it would be easier to buy if compatible OEM Parts numbers were listed.
【Review】
It is useful for fixing exterior parts such as Cowl and Screen.
OEM Parts are expensive, so if you want to keep the price as low as possible, this is a good option.
View detail
Half the price of OEM
It had not been replaced for a long time, so it hardened and lost its damper effect, so it was replaced for refresh!
I was quoted to buy OEM, but it cost twice as much as KITACO product, so I decided to buy KITACO product.
I am Large satisfied with this one because it is cosier!
View detail
standardized article or goods
The bracket that the well nut is attached to was damaged, so I decided to replace the bracket and the well nut at the same time.
I bought the cheap KITACO parts and the OEM parts as insurance. When I compared them, I found out that they are the same product from the size to the engraving because they are standard products.
The Well nut I used this time was C-550, but there is a Large size Well nut with L at the end.
Although the price of OEM parts varies depending on the manufacturer, KITACO's well nut is generally cheaper and recommended for replacement.
View detail
Step end・Nut
I replaced it with Rear Sets
the resin at the end of the footpeg came off and was lost
I was looking for something to help with that
I found a clasp similar to Bar End
Nut is embedded in a tubular rubber
By tightening the bolts, the rubber expands and
It is a structure in which the rubber is fixed in a cylinder
This structure is the same as the Bar End, so
even as an end process for footpegs
You could use it, couldn't you? thought
I bought it
Part that fits exactly into the footpeg hole diameter φ18.5
φ18.2?SizeM8Nut was there, so
DAYTONA:Buy it with the Cap bolt color
Material:Cap bolt in Aluminum
Making the step end look gorgeous and
By making the footpeg a little longer
It gives you a wider footing and a more comfortable position
A note on customization is
I need to put a screwdriver on the bolt to hold it in place
GEAR and Brake operations loosen the bolt, and the bolt comes loose
There's a good chance it will be gone before you know it
You should check how it's fixed after installation
Is good
View detail
Mostly successful
Cowl fixed well nut rotted
In OEM, Quantity:1 Set of 10pcs.
The rottenness is 1pc.
Quantity:2pc. Set
We were able to get the desired number of items for KITACO Universal Product
View detail
Firmly fixing it is difficult and impossible
Purchased the SetrabOil cooler to install on my MONKEYFrame But I think there are some to use it as a supplementary
Because it is impossible to fix Firmly only with these Parts, it is used only as an auxiliary It is possible to do so
View detail
[Webike Monitor] It was used for Fender-less attachment. Since vibration of the Single was anxious, it attached and carried out by the Well nut, but I think whether the shake was considerably reduced by vibration.
[Webike Monitor] It was used for
Fender-less attachment.
Since vibration of the
Single was anxious, it attached and carried out by the Well nut, but I think whether the shake was considerably reduced by vibration.
View detail
It is used for Mirror attachment of DUCATI 900ss. Since it is a part with vibration, the Well nut made of the Rubber is used, but since periodical exchange is required of aged deterioration etc., the product made from a KITACO in which
It is used for Mirror attachment of DUCATI 900ss.
Since it is a part with
vibration, the Well nut made of the
Rubber is used, but since periodical exchange is required of
aged deterioration etc., the product made from a KITACO in which acquisition is more positive than
brand-name parts is used.
Since the portion of the
Rubber crushes and becomes tight, in those who use a thing longer than the die length of a
authentic positive Screw, the workability at the time of
bolting becomes good.
View detail