Reviews
Mounted on cb400sb NC42
The Silencer and the Chain Cover were removed and installed.
It seems a little shorter than OEM, so we installed it with slight adjustments.
Since there was no Center Stand, we used a car Jack to lift it.
Using a torque wrench, tighten to the specified Torque and complete.
The ride wasn't even dented by the OEM, so I don't know yet.
I like it because it's not uncomfortable at all.
View detail
The perimeter...
There are too many excess white areas around the surface to apply it neatly.
Difficult. Cut and paste the excess
It is easier to apply the paste neatly.
View detail
Standard OHLINS
I installed the OHLINS, which are more flexible than the OEM suspension, and I really enjoy winding. I think the pain in my buttocks may have been reduced. The price is expensive, but I think it is worth it. View detail
Wow that's cool
We put them on tool boxes, etc.
When it comes to OHLINS, this Coloring is the standard.
Personally, I think Parenthesis is good. It is an easy-to-use sticker because it is just the right size to put on something.
View detail
Fits: KAWASAKI Z 900, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Performance
Bael~! It's been more than six months, right?
Is it still OHLINS for z9TIGER?
I am very satisfied with the color MATCH.
You need a Rear Stand and a Jack to lift up the body of the vehicle. BoltQuantity:The rear shock can be inserted and removed only by slightly lifting the body side with a jack. Torque wrench is necessary for tightening. The ride quality was as you said. There is no feeling of pushing up, and I feel that the rear tire follows the road surface. It was an expensive purchase, but I am quite satisfied.
View detail
surprised
Front and Quantity:I replaced it with a Set.
The ride has changed dramatically.
First, the initial operation is Smooth and works well.
It seems to tame the unevenness of the road surface when driven at low speeds.
At high speeds, the foot is held firmly at a certain point when a load is applied.
It will not collapse even if the speed of entry into Corner is higher than before.
It was a far cry from the bouncy movement of the Normal suspension.
It is a bit expensive, but worth it.
View detail
The best
Setting width increases significantly compared to NORMAL.
The preroad, extension, and compression settings that I prefer can be easily set, and the operability of the motorcycle has been greatly improved.
Corner will be fun.
I have tried various Settings, and once I discover the best of them, Motorcycle feels different.
However, depending on your weight and what you are wearing, Pre-roadQuantity:Set has to be changed, but it is also a fun thing to do.
View detail
Fits: KAWASAKI Old Z series, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z900 GP ALL, KAWASAKI ZEPHYR1100, KAWASAKI Z750GP, KAWASAKI Z1000R
Ohlins would look great on an ita car!
It was installed on a Motorcycle I recently purchased used, it may not be a Kawasakifor Vehicle, but I believe the model is an S36E. The OEM installation of MHR is Marzocchi, and I am satisfied with the color tone of the OHLINS with partial Gold, which suits the Motorcycle. I haven't driven a lot yet, but I like the ride. I have no complaints at all, so I will continue to use it. I am sorry that I don't know if there is any Small modification etc. regarding the installation of the product outside of the fitment. View detail
StickerTune
I bought it on StickerTune.
Large is a little small.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09 To Racer
I felt the impact from the unevenness of the road.
I have one of these on my '19 XSR900.
The purchase and installation was done by the dealer.
The OEM rear suspension of the XSR900 seems to have a harder setting for overseas use, and I felt a shock that pushed me up from below when I went over uneven road surfaces and highway bridge joints. At first, I thought it was a break-in process and ran 1000km, but after that, it did not change and it was the source of the fatigue of touring.
I thought about changing the setting, but it is troublesome to find the best setting in OEM, so I decided to change the rear suspension. I thought about changing the setting.
For the XSR900, the OEM option KYB suspension and OHLINS suspension with hose type adjuster are also available, but I didn't want to clutter up the side of the vehicle. I chose this one.
After the replacement, the ride is much smoother than before and I don't feel any shocks when driving which I was worried about.
At the time of the replacement, the OEM Spring color was Silver, so I was hoping that at least the Spring color would be Black, but now it is Color:Spring in Yellow is also good to be Accent.
View detail
OHLINS
I bought it before, and I bought it again because I put it on Steering Damper.
Design, it's a nice shade, but this
View detail
Different sizes
Last time, I bought a small one and put it on, but it seemed to be too small, so I bought a medium one this time.
It's just that it makes me feel Large.
Even though the Size has changed, the selling price seems to remain the same.
View detail
I put it in sc59 ^ ^.
[How is it used?
Street riding Winding Circuit
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
It was easy.
How was your experience with it?
[Included Parts:were they on?
[Was there anything that disappointed you?
not exist
It is said to be for sc77, but it can also be attached to sc59.
Specifications, total length, and length of the collar were all the same.
I don't have the skills to fully use the performance, but I am highly satisfied.
I'd like to boil it down slowly ^ ^.
View detail
I installed it on my ZrX1200 DAEG.
It was quite a challenge to install, but I am very happy with it. It seems to respond smoothly to the input from the road.
There is a wide range of adjustment, so it will be worth tweaking.
View detail
I installed it on my ZrX1200 DAEG.
I have installed OHLINS. The input from the road has obviously changed. It moves quite flexibly.
There is a wide range of adjustment, so it will be worth tweaking.
View detail
I installed it on my ZrX1200 DAEG.
I think it is more supple than the OEM suspension. View detail
Black is a soothing color.
Because I did not like the Sticker of OEMOHLINSFork of MONSTER S21200S in Blue.
I've attached a Sticker here.
Not to overemphasize, but BlackSticker is COOL!
View detail
LooksImpactLargeLargeLarge
I haven't adjusted the details yet, but it feels soft when going over bumps. The look Gold is noticeable ImpactLarge! View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI NINJA 1000
To OHLINS, no longer a standard
[How is it used?
I installed it about 2 weeks ago.
I have less than 200k miles on it since I installed it.
Was the one you received as per Image?
It is almost exactly as the Image, but if I may say so, the GoldPlating is a little uneven in color.
Was the installation difficult?
The Ninja 1000SX is not yet compatible with the Ninja 1000, but it is compatible with the Ninja 1000 14-19 model, so it will fit.
However, there is an instruction in the manual to prepare the necessary parts to fix the Preload Adjuster separately.
M6 Bolt 40mm×2、For M6 Φ20mm Washer×4
I think the installation is a little bit troublesome, because there is no main stand, so you need to fix it with maintenance stand. It takes more time to mount the Jack.
Since the Jack-upPoint is near the Side Stand Bracket, it is necessary to remove the Side Stand and the Right SideSide cowl.
How was your experience with it?
The spring rate is a little lower than the OEM suspension and the dumping is faster.
If you are a regular road driving Main and occasional Sports driving, this will be enough for you.
[Included Parts:were they on?
Comes with Manual and warranty card and Sticker.
[Was there anything that disappointed you?
This is where the Bolt and Washer for the Preload Adjuster fix for the 14-19model are not included.
Other items that would be helpful
There is another way to use the parts of Z1000 R Edition other than fixing Preload Adjuster specified by OHLINS.
View detail
G310R OHLINS
This is very good. Especially, the calmness at the time of turning back is not compared with NORMAL. In addition, because the initial, pressure damping, and extension damping are also adjustable, you can adjust the quantity to your preference.:If you are of a standard weight, the spring rate is large and sturdy.
It's easy to install if you can jack it up.
View detail