Reviews
I like the OEM style
I purchased it with Handlebar exchange, but I like the OEM style.
There are various Grips, but the one used in the previous Motorcycle was not durable and it looked like it was Hades ...
Easier to grasp than OEM to OEM like design, and durability is expected afterwards.
By the way, Grip bond is unused.
View detail
Fits: KAWASAKI GPZ900R NINJA, KAWASAKI Z1000, KAWASAKI Z1000, SUZUKI RG400 γ, SUZUKI RG500 γ, YAMAHA SRX400, YAMAHA DIVERSION400, YAMAHA DIVERSION600, YAMAHA SRX600, KAWASAKI GPZ900R NINJA [Ninja]., KAWASAKI Z1000, KAWASAKI Z1000, SUZUKI RG400 γ, SUZUKI RG500 γ, YAMAHA DIVERSION400 [DIVERSION]., YAMAHA DIVERSION600 [DIVERSION]., YAMAHA SRX600, SUZUKI RG400 γ, SUZUKI RG500 γ, YAMAHA DIVERSION400 [DIVERSION].
It does not replace OEM Product
In case of SRX OEM Product and Gold amount did not change, but I tried using it. I do not have any problem on the quality feeling and I used hundreds of kilos, but there is no leak. I think that that point is good because Grease is attached.. You have to be careful on the back and front of Seal. View detail
Ariete A Lead OEM-RR RACER to YAMAH
We exchanged Grip for exchange due to wear of Throttle cone.
I felt like using the ariete OEM - RR RACER, so this time I made it to YAMAHADesign of the same series.
Since we already made Throttle and Handlebar Penetrating, exchange old grip cut off with Cutter Just spot it without painting Chain cleaner inside Handlebar surface and inside of Grip. I have never used any glue, but I think it's durable Large.
YAMAHADesign is thicker and more flexible than RACERDesign so I think that it is suitable for Touring I am looking forward to the feeling of running in the future.
I made it to YAMAHADesign according to Motorcycle, but it is not so fancy as possible with a modest design.
View detail
I started to blot out a little..
Although it is only VT, which has been only a few months since the exchange, Fork oil adherence has become visible to a little Inner part (' - Ω - `)
Since the point Rust was somewhat in the Inner part, is not it fairly good if you have 2 months?
Although it was not bleeding to worry about, I decided to exchange it together because the Inner part removed from the part pickup vehicle got in (handled as ` - Ω - ')
Although it is the amount of Oil this time, I felt a bit Stroke was astringent in the prescribed amount we put in the last time so put Oil in a soft item and tried to make it a little less.
Dirt was seen inside, so I cleaned up at the same time.
It took about 2 days to run about 500 km while assembling, while adjusting the Air inside the Fork on the Service station, confirming that leaks and bleeding disappeared and the work is completed.
In the Oil seal of the OEM, there was Rust, it had spread quickly from there, but this Oil seal was pretty good as it was usable for 2 months without leakage.
It is said that Fork in a neat and beautiful state seems to be able to use it for 1 and 2 years without problems.
The person who replied SR previously can still use without leaking ヾ ('∀ `*) A
View detail
It is durable
【What made you decide the purchase?】 Since OEM's letters are included, I purchased it because I thought it was as good as OEM or more.
【How was it actually used?】 The Grip used before was cracked in half a year but it is used for 1 year and there is no crack, it is about a little wearing away. When using the same Angle one year 10,000 km when comparing with purchase and photo comparison (I am rolling Hot grip from the top in winter.) I attached the photo of.
【Was it difficult to install? (Hard parts case)】 I cut off the old Grip with Cutter and sprayed Parts cleaner inside the new Grip, I just hated it. It's exactly what I got.
【Please tell me the point of installation and hang (in the case of Hard parts)】 I did not use Grip bond, but it was not twisted and there was no problem.
Hang put a lot of PartsCleaner. Attach as soon as attached.
[Is there anything I was disappointed about?] There was no problem as expected
【Hope for Manufacturer - Please let me know if there are any improvement points】 Though I chose RACERDesign but Thicktle is so thin ○ If it is not an octagon etc., the corner as it is shown on the surface as shown in the picture.
【Have you compared items?】 Pro grip
[Others] I chose Length 115 mm for installation in the SR 400, but it seems to fit even 120 mm.
View detail
It is OEM Same Product.
About VT last year I felt that the ups and downs of Fork seemed to be intensifying, but while I noticed that it was a little bit blurred, I became miserable and misguided and riding, I just got back home from shopping and put it in the garage A few hours later Oil leaked from Fork and the Fender was covered with Oil.
In this state, the Oil is scattered in the Tire and it is dangerous. As soon as I feel I have to exchange Fork seal and Dust Seal, I bought the same Manufacturer's Fork seal which I used for SR before.
Since Dust Seal is not included, you need to prepare Dust Seal separately, but I felt it was reasonably affordable even though I thought of only Fork seal.
Package is packing at the Level which is necessary at minimum, and extra garbage never increases, yet it felt that it is also easy to open Package so that it is also very good in that aspect.
Quality is same as OEM. , Or even when used before, there were some points Rust on the Inner moving part but there is no such thing as it will be torn and leaked from there, even now even after half a year passed, it can be used without problem.
It takes a lot of time to change the Fork seal so it will be a work hour so that if you are familiar with it, even with two people you have to watch 3 or 4 hours, but Fork seal - After replacing Fork oil, it absorbs and shrinks the shock at the step so that it is not compared with Oil that is coming out or is outdated.
Because it is a part used for Parts that supports the car body and keeping Balance, cheap items are a little ... I think that it's of Level's problem to use it without worry even those who use it safely.
This time SR - Since VT has the same diameter, we used the same ProductNo thing, but there are various Size and there are various Size and conforming cars so when replacing Fork seal or replacing Fork oil, Repeat this Fork seal I think I will purchase it.
There is no disappointing point and durability is also very good so we can recommend it to any way you use it like on-road vehicles such as off-road vehicles and American on-road vehicles, town-riding vehicles, commuter vehicles, vehicles for circuits etc. It is seal..
View detail
Since brand-name parts did not come out for 1974 models, and the Alito Fork seal was the Size exactly, it used.A price is cheap, and even the Silicon grease is attached and it is inexpensive.Although exchanged about twice, it is quality and recommended.
Since brand-name parts did not come out for 1974 models, and the Alito Fork seal was the Size exactly, it used.A price is cheap, and even the Silicon grease is attached and it is inexpensive.Although exchanged about twice, it is quality and recommended. View detail
[Webike Monitor] Although former original manufacturer's product and the external article tried many things, when there is no coming very much exactly and it was sometimes checking, this product stopped and purchased to eyes.The thumb side was extract
[Webike Monitor] Although
former original manufacturer's product and the external article tried many things, when there is no coming very much exactly and it was sometimes checking, this product stopped and purchased to eyes.The thumb side was extracted a little and it was tight to me with a comparatively small hand.Molding and texture also seem to be high-level and there also seems to be little consumption.It is satisfied with this Grip for the time being.
View detail
Evaluation of those who are using it by AR was believed and purchased in play here.Since it was still a NORMAL for 24 years, it changes to the feeling carried out gently, and is dramatically satisfactory.It is durable and I think that that is right and it
Evaluation of those who are using it by AR was believed and purchased in play here.Since it was still a NORMAL for 24 years, it changes to the feeling carried out gently, and is dramatically satisfactory.It is durable and I think that that is right and it relaxes now for the time being.Certainly [ Design ]. View detail
YZF-R 1_2006 was equipped.This Grip is pure-shaped [ of HONDA ] and is the form of the Grip which the Valentino Rossi player liked and used from HONDA even after transferring to YAMAHA and DUCATI.Since it is pure-shaped, even if it is not conspicuous and
YZF-R 1_2006 was equipped.This Grip is pure-shaped [ of HONDA ] and is the form of the Grip which the Valentino Rossi player liked and used from HONDA even after transferring to YAMAHA and DUCATI.Since it is pure-shaped, even if it is not conspicuous and exchanges, there is no sense of incongruity of appearance.It is recommended in the direction of functional serious consideration.The Grip of the NORMAL had hardened, and since R1 had the strong Return spring of a Throttle and the Grip was slippery and returned in the palm, it exchanged this time.The Grip with Ally is the soft construction material of the touch carried out gently, and having grasped lightly also fits well.Since thickness is the same in it being pure and softness is also moderate, there is neither touch like what is called a Soft grip which carries out GNU GNU, nor touch which became thick, and it is not uncomfortable even if it exchanges from a NORMAL.Since it does too much in all senses and there is no admiration, it becomes a Modify of a very noble impression.Although the life is based also on how to ride well [ so ], when it is me, it is the touch which was worn for a while at 10 or about 000 km.Since it was cheap, he bought the one same this time again.Although there was one more set DUCATI_MONSTER696, the same Grip is due to be used also there and he bought two sets this time.We can recommend you. View detail
[Webike Monitor] Since the Logo of CBR is contained, they are goods delightful to a CBR Owner. I think that as for a little attachment time will not start so much if CRC etc. are sprayed. Attachment was tight for not doing anything. The g
[Webike Monitor] Since the Logo of
CBR is contained, they are goods delightful to a CBR Owner.
I think that as for a little
attachment time will not start so much if CRC etc. are sprayed.
Attachment was tight for not doing anything.
The
gripping feeling is also good touch in somewhat thick touch.
View detail
He bought it for crack prevention of a Tank. It was good to become an One point of a Motorcycle although having stuck straight was serious. To crack prevention, it may be slightly small.
He bought it for crack prevention of a Tank. It was good to become an One point of a Motorcycle although having stuck straight was serious. To crack prevention, it may be slightly small. View detail
It carried out now which was purchased and was kept for a while. Since time was made and he understood the method of OH, Oil seals were exchanged. Especially, it could do satisfactorily, and attachment does not have an exhaust air omission, oi
It carried out now which was purchased and was kept for a while.
Since time was made and he understood the method of OH, Oil seals were exchanged.
Especially, it could do satisfactorily, and
attachment does not have an exhaust air omission, oil leakage, etc., either, and was finished (since it is a new article do naturally?).
I also regard
Sas's motion as a Smooth a little.
The
price is also handy and satisfactory.
View detail
It was good exactly also in size, and the color of the Tank was finely transparent, the Design was also visible, and it was very beautiful.
It was good exactly also in size, and the color of the Tank was finely transparent, the Design was also visible, and it was very beautiful. View detail
Since it was reputation that the Honda form it was [ Honda ] conclusive factor that was cheaper than the pure estimated cost will also be the same 2012 / as of August and it is soft in play [ other ] in fact. Perfect, when you think whether
Since it was reputation that the Honda form it was [ Honda ] conclusive factor that was cheaper than the pure estimated cost will also be the same 2012 / as of August and it is soft in play [ other ] in fact.
Perfect, when you think whether to be liking and it purchases! Although based also on
liking, since an authentic positive one was the same form as an Off, since DR-Z400SM was not so pleasant, it was exchanged in the Road this time.
It is thought that the product here of form was good and the pain and tiredness of the hand reduced it.
View detail
[Webike Monitor] The Tele lever of BMW K1200RS (99) was equipped. although it is 1200 cc, 35 phi and a thin thing, The portion which is visible to what is called a Front fork in case of a Tele lever does not achieve the function of a Suspension
[Webike Monitor] The Tele lever of
BMW K1200RS (99) was equipped.
although it is 1200 cc, 35 phi and a thin thing,
The portion which is visible to what is called a Front fork in case of a Tele lever does not achieve the function of a Suspension only as duty of guide,
Although it is because neither a Spring nor a Damper is contained -- When
, therefore this portion were satisfactory to guide, the method of oil leakage received and it exchanged for the Dust seal tattering truly that no less than 13 years will pass, and it refreshing a few preventively the uninfluential place.
Since in the case of a Tele lever it will be termination if an Inner Tube is put after exchange extracts an Inner Tube and exchanging a Dust seal and an Oil seal, work is easier than a common telescopic fork.
It is kind that the Grease only for
is attached, and in the case of K1200RS, since it is more overwhelmingly [ than brand-name parts ] cheap, it is satisfied.
View detail
[Webike Monitor] Before , I was allowed to purchase [ ZX-10 or ] and the ZEPHYR400 also chose this time also. Since the delivery date of brand-name parts is taken although the actual thing has not been compared as it is pure, made in A
[Webike Monitor] Before
, I was allowed to purchase [ ZX-10 or ] and the ZEPHYR400 also chose this time also.
Since the delivery date of brand-name parts is taken although the actual thing has not been compared as it is pure, made in Alito has been purchased.
After exchange does not still have oil leakage ZX-10, either, and it is making the same Alito Fork seal as
last time into the kitchen.
I think that I will continue using the Manufacturer which is individually reliable too.
View detail
[Webike Monitor] A Honda type is purchased although it is a Motorcycle of the SEA BASS. It is good for the form of the Grip to be little by little thin toward the outside to an inner side. It is the form which is easy to operate it.
[Webike Monitor] A Honda type is purchased although it is a Motorcycle of the
SEA BASS.
It is good for the form of the
Grip to be little by little thin toward the outside to an inner side.
It is the form which is easy to operate it.
View detail
Form was completely the same as the Honda pure Grip, and became a somewhat soft feel. The gripping feeling improved and an Axel and lever handling became easy. Since a raw material has elasticity when it compares that it is pure, and it is hard
Form was completely the same as the Honda pure Grip, and became a somewhat soft feel.
The
gripping feeling improved and an Axel and lever handling became easy.
Since a raw material has elasticity when it compares that it is pure, and it is hard to arrange the form of the slot on the Grip finely at the time of attachment, a hang is somewhat required.
Although he would like to exchange
pure Grip, a showy external article is recommendation at a person weak.
View detail
Since the ZRX1100 fork was diverted to the other vehicle type, I purchased for the overhaul. Although there is a completely same size and a parts number is different, only this parts number is slightly expensive. Texture and structure are completely diffe
Since the ZRX1100 fork was diverted to the other vehicle type, I purchased for the overhaul. Although there is a completely same size and a parts number is different, only this parts number is slightly expensive. Texture and structure are completely differerent from genuine. I think attached exclusive grease is important to make this product efficient. I was also able to put it satisfactory like a genuine. I think that I will see from now on a situation since the reduction of durability enhancement or friction is the merit of this product. View detail