Reviews
This, this, this!
I don't like the fluffiness, so I put it in for the purpose of strengthening the pressure side only. It is easy to literally just put it in. I did not make any adjustments. It rattles while running, but I think it's fine if you don't mind. I was more impressed when it sank down gradually without bottoming out when I applied brake with Overspeed. View detail
Since it was dark even if Wright of NSR250R changed into the efficient bulb too much darkly, HID is purchased. Since the bulb went out, the fuse melted and the high tension of the ballast had broken to the blinker relay although HID of 88 was before a
Since it was dark even if Wright of NSR250R changed into the efficient bulb too much darkly, HID is purchased.
Since the bulb went out, the fuse melted and the high tension of the ballast had broken to the blinker relay although HID of 88 was before attached to XR, the moto garage was used this time.
Since attachment on a size was doubtful when it was an attachment change type and a low and NSR were H4R, purchased the H4R adapters, but.
The person [ who buys it ] for whom a low and interchangeability do not have an H4R adapters, who was not able to do a replacement, who cut off the portion of the clip after all, remade the clip newly by plastic repair, and required great time and effort had better be careful (processing required).
View detail
Re-Motion Hyper ForkValve
Installation completed and test drive.
There was a clear change compared to before installation.
View detail
Quick Handling
First of all, it works; I've also run the Fork oil (OEM} replacement The standard pre-road already feels like it's sticking out, so it won't stick out in a straight slalom I pulled out the pre-road up to about 1 memory It is just about 1 memory
The body posture of the vehicle is slightly lowered front There is no discomfort in a natural feeling when you start driving Because the handlebar is big to begin with
Even if you enter the Corner in this state, there is no sticking feeling and you can use it with Quick Handling Large Satisfied There is no similarity to the old one There is a push up, but I don't mind it because the convergence is fast
By the way, I just put it underneath the spring, so it makes a rattling sound Well, that's just how it is It's fun to ride it
View detail
Fits: KAWASAKI Ninja 400R, KAWASAKI ER-4n, KAWASAKI ER-4n
Increasing the sense of stability!
Stability of Front fork (Unreliability) Purchase for improvement.
Ninja400R・650 / Initial adjustment for ER-4n ? 6n Front fork - Since attenuation adjustment was not attached, I was intrigued by suppression of FrontDive at Brake & Turn.
Since installation of the product comes with a careful photograph attached Instruction Manual that will be different by type of vehicle, if you can make a pair Rose シ ー by yourself it can be easily installed.
Actually running, FrontDive at Brake (I can not depend on it as if I'm doing a bottom thrust by going into my back all the way) Was suppressed considerably.
Stroke gets stronger at the earliest, and if it is slow, he will steadily steady backwards.
It might feel hard if it is about town riding.
I think that it becomes a strong viewpoint because the range of Setting widens when it comes to competition from Sports.
The strength of Valve's effectiveness can be adjusted by the number of Shims who are compatriot, but I think that it is troublesome to make fine adjustments as it will not appear unless Fork is upside down.
Creation of ValveBody is pretty good, disassembly and maintenance seems easy.
The price is slightly higher, but as a body I was considering transplanting around the Front of the inverted VERSYS, it was a correct answer by wearing ForkValve when considering trouble and Cost.
Although it is diversion in compliant models, I think it is difficult..
Because it is made to fit with Cylinder at the bottom of Fork, it seems necessary to adjust ValveBody seating surface, Length adjustment of Color pipe, Shim number adjustment.
View detail
Brightness as expected
I installed it in BMW K100RS 4vAnniversary.
Previously, we also installed Re Motion's HID on the R 1100 RT, Troubleetc with no HID. There was a sense of uneasiness a little, but I bought it because it is easy to replace the ratio for the amateur also because the Motion Objection correspondence was good. Brightness is much brighter and more satisfying than NORMALH 4. There are other companies' products, but I think that it is outstanding as cost effectiveness.
View detail
Instead of OEM Parts Number
Partly because OEM Parts Number was discontinued, I could find it, I purchased it this time. I am satisfied with the price. Although it took time to arrive a bit, I arrived earlier than expected and I am satisfied. View detail
Used for PIAA ML 34
I am using it for ML 34 of PIAA.
It is an exchange from 55 WHID.
Because of Lens cut, low light distribution
It is subtle.
LED emission is low / Both high
It is two lights each.
Speaking of greed,
When I was high I wanted all four lights to light.
View detail
4300K was attached to GSX1400. It became very bright after attachment and the run became easy at night. Although 4300K was attached, a little [ in color ] paler 6000K may be more legible. Although the half place will pass after attachment for about one
4300K was attached to GSX1400. It became very bright after attachment and the run became easy at night. Although 4300K was attached, a little [ in color ] paler 6000K may be more legible. Although the half place will pass after attachment for about one year, there is also no fault, and it is reliable from the things of cheap foreign-made goods. Since parts are also sold alone or the guarantee is also attached for two years, it is safe. View detail
A front motorcycle -> it uses, transplanting with the present motorcycle. It uses satisfactorily at all for about 4~5 years. It is a reliable product.
A front motorcycle -> it uses, transplanting with the present motorcycle.
It uses satisfactorily at all for about 4~5 years.
It is a reliable product.
View detail
Fits: HONDA VT250 SPADA, HONDA VT250 SPADA
Since it was worrisome from before, it attached to the overhaul occasion simultaneously with a spring. Since attachment was only put in under the spring, work was finished simply. Subduction of a fork when having test-ridden instantly and having f
Since it was worrisome from before, it attached to the overhaul occasion simultaneously with a spring.
Since attachment was only put in under the spring, work was finished simply.
Subduction of a fork when having test-ridden instantly and having felt first after the end of work applies brakes felt easy few, strong brakes were applied, there was also no strange pressure from below, and it was a good feel.
Although about 10 K of road over a mountain passes were run later, it was able to run in comfort to the extent that it did not become a comparison to normal.
Since it was slightly expensive, I was allowed to consider it as four *.
View detail
It was pulled by cost performance and HID of Remotion was chosen. Although it is used after purchase for one year or more, any trouble cannot be found and the waterproofness of the connector, etc. being solid, and using it is being continued. In m
It was pulled by cost performance and HID of Remotion was chosen.
Although it is used after purchase for one year or more, any trouble cannot be found and the waterproofness of the connector, etc. being solid, and using it is being continued.
In my case, 4300k was chosen in consideration of the field of view of a rainy day, etc., but brightness is fully satisfied with a great difference of the halogen of normal.
Although it is used only for Low Beam now for H7 bulb, one more set is purchased and it is under thought with whether it will put also into High Beam.
View detail
I hear that a meaning called having felt deficiency of light quantity on the mountain path of night without a street, etc. and safe reservation of daytime is also effective, it was begun to consider HID wearing, and this product was decided on by campus s
I hear that a meaning called having felt deficiency of light quantity on the mountain path of night without a street, etc. and safe reservation of daytime is also effective, it was begun to consider HID wearing, and this product was decided on by campus system correspondence peculiar to BMW.
4300K is chosen by practicality serious consideration.
After goods arrived, it exchanged by itself, but since the wearing method according to vehicle type appeared in HP of the moto garage by entering a photograph, it has worked that there is nothing uneasy.
wiring -- some -- having wavered (place etc. which let wiring pass) -- it has worked satisfactorily.
The error at the time of lighting does not come out, either, but it is job finish safely.
It became so bright that a run at night becomes pleasant henceforth.
Since the irradiation range is decided by Wright's cutting etc., it does not change, but the quantity of light is enough, a road condition becomes intelligible, and it is thought that the pace went up.
It is that there came to be sound of the snap which was not carried out before at the time of ignition ON and OFF when calling it the somewhat uneasy point.
Although I think that it is satisfactory, it is worrisome in what is operating.
Although it cannot say anything since there is no telling whether it is a problem of HID and whether it is a problem peculiar to its own motorcycle ... Fundamentally satisfied.
A price is also cheap compared with other HID(s), and it has sufficient (it did not necessarily compare with others) engine performance.
I think that they are inexpensive goods.
View detail
It is the HID burner 8000K. Although it looks blue, there is also whiteness to a slight degree actually.
It is the HID burner 8000K.
Although it looks blue, there is also whiteness to a slight degree actually.
View detail
Although the same thing was attached before, it exchanged for the life of a burner and a ballast. With [ although the form of the ballast had changed / in the harness attached until now ] no problem. The brightness which beginning attaches by exch
Although the same thing was attached before, it exchanged for the life of a burner and a ballast.
With [ although the form of the ballast had changed / in the harness attached until now ] no problem.
The brightness which beginning attaches by exchanging burners returned.
He feels actually with whether it is such a bright thing like this.
The HID here is quality compared with a price, and its correspondence of a distributor is also good.
View detail
It attached to BMW F800S. Since it attached to the homepage and the example appeared with the photograph, it was not troubled. However, although the ballast was stuck with attached double-stick tape, it has dropped out in a cowl during a run.
It attached to BMW F800S.
Since it attached to the homepage and the example appeared with the photograph, it was not troubled.
However, although the ballast was stuck with attached double-stick tape, it has dropped out in a cowl during a run.
(It was a tape by the side of not a car body but sponge that the tape separated) Probably, adhesive strength will be weak.
Since it was unavoidable, the screw stop was used.
Functional completely satisfactorily, it is bright and satisfactory.
Although 4300K type was chosen, it was bright enough and the run became easy at night.
It is only prayed that the rest does not break down...
View detail
It is used for the hornet 250. It may be KIBISHII, if a little light case is hardly shaved although attached by bolt on. Since processing methods have been in the manufacturer's HP, they are satisfactory. It is satisfied with that it is cheape
It is used for the hornet 250.
It may be KIBISHII, if a little light case is hardly shaved although attached by bolt on.
Since processing methods have been in the manufacturer's HP, they are satisfactory.
It is satisfied with that it is cheaper than other manufacturers anyhow, and two-year security and kind correspondence of Ho, a manufacturer.
Although it stops having lit up once and I had you fix in one year and a half, I had you correspond very carefully and had problem solution etc. taught.
View detail
They are three failures in four years. Since it was used by two sets, one piece broke down twice. Although I think that manufacturer correspondence is so so, the improvement is not carried out too much. It seems that a majority of the ones as
They are three failures in four years.
Since it was used by two sets, one piece broke down twice.
Although I think that manufacturer correspondence is so so, the improvement is not carried out too much.
It seems that a majority of the ones as most and me of the HID bulletin board of HP where an inquiry of failure is the same are also visible.
(Incidentally it is out of order now.)
It broke down before one year passed after repair ...
It is waiting for a manufacturer's correspondence now. It is safer to carry out a recommend, if they say that what is necessary is just to have for two years, but to hit something else.
Although HID of the absolute is incidentally used seven years this and that, he still has no failure.
The thing of the manufacturer who can place reliance after all is good.
View detail
The HID here was attached and carried out today. Although the photograph was what may appear mostly about the description, it was incomprehensible that it is not color and that there was no illustration in a fine place. Moreover, although processi
The HID here was attached and carried out today.
Although the photograph was what may appear mostly about the description, it was incomprehensible that it is not color and that there was no illustration in a fine place.
Moreover, although processing was required for the waterproof rubber of a headlight, more than it appeared in the description, it had to cut off.
Since it was called the exclusive kit about actual attachment, it has attached easily.
When taking a power source from a battery, what must extend wiring was troublesome, but the igniter, the ballast, etc. were made all together and were good.
Since it may interfere if it does not simply collect with a kitchen since wiring is long, cautions are required.
Since it was also easy to attach by a price being handy, I will be referred to as *4.
View detail
Since daytime is also bright with a bright white light, presence is appealable. Attachment is easy if a cowl can be removed.
Since daytime is also bright with a bright white light, presence is appealable.
Attachment is easy if a cowl can be removed.
View detail