Reviews
Fits: HONDA CB250R, HONDA MONKEY125, HONDA CBR250RR, HONDA CB300R
Neat oil cap
I purchased and installed it on the cb1100ex model I was previously riding.
Installation was possible without special tools or difficulties with disassembly and assembly.
So, after purchasing CT125, I found the same product and installed it.
It's matte black and the moriwaki logo is nice -------------------------------------------- --------------- I bought it after purchasing it on the existing CB1100EX model. Installation was possible without the difficulty of assembling special tools and decomposition. So even after the CT125 purchase, there was the same product. It's matte black and the Moriwaki logo is good Powered by Google Translator
View detail
Design-wise good
I checked the video on the web before starting the work. The coupler for the number-plate lighting line cannot be removed unless the cowl behind the seat is removed. It took a little bit of time to remove and install the Carrier Plus, but the installation was completed without any problems. After installation, I found that there is a protective tube on the exposed line from the Number Plate lighting and that there is a gap where it enters the body of the car. It looks more expensive than other products (plate type products). View detail
It looks better, but ….
Installed before summer to bring out the Accent on the feet of the REBEL 1100.
The reason why I am reviewing this now is that when I turn small on Rebel and turn on Curve, or turn on Curve with an incline, I easily touch the ground.
I thought it was just a 90mm problem, but it rubbed on the 70mm as well, so it might be easy to replace it in case of a fall….
It is very careful because it is rubbed only by lightly knocking it down in an urban curve that is not a winding.
For Rebel, which can run as good as NAKED, I say it's just a look.
View detail
Fits: HONDA Super Cub 110, HONDA Cross Cub 110, HONDA GB350 S, HONDA MONKEY125, HONDA Super Cub C125, HONDA NC700S, HONDA NC700S Dual Cluth, HONDA NC700X, HONDA GB350, HONDA NC700X TypeLD DCT, HONDA NC700X Dual Cluth, HONDA INTEGRA, HONDA NC700D, HONDA X-ADV, HONDA NM4-02, HONDA NM4-01, HONDA NC750X TypeLD DCT EP, HONDA NC750X TypeLD DCT EP, HONDA NC750X DCT EP, HONDA NC750X DCT EP
For HONDA monkey
I bought it while it was still in stock because my new color monkey125 is scheduled to be delivered at the end of the year.
I had purchased a MainFilter and a SubFilter for my last rebLe1100 and knew how great the products were, so I felt confident in purchasing them again.
My motivation for purchasing this product was the satisfaction of having a ridiculously good component on my car body, and I like the fact that the Oil is said to flow at a fast rate, so it doesn't put a strain on the Engine.
I also think that being able to clean with Parts cleaner is good for the environment.
This way I don't have to worry about cleaning the Element when I change the Oil twice a year.
However, the cosmetics are not good.
It will take more than a decade to pay for this one product, so if you replace the vehicle, remove this one as well.
The satisfaction of ownership comes once you buy it, so I think the key to success is to change your mindset before you buy it.
View detail
side cover finish~!
After purchasing the Monkey 125 motorcycle, I installed the Yoshimura Up muffler. After installing the muffler, there were a lot of empty spaces on the car stand, so I bought it to fill that space. There were other brands, but I really liked the Moriwaki lettering, horizontal pattern details, and steel silver material. Moriwaki's brand was also reliable. The price is quite expensive, but if you look at the finish and materials, it makes sense. I'll use it well. Thank you. View detail
Fits: HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Premium Quality
Easy to install. Essentially plug and play. Great contrast with the black frame of the bike for a premium look. Highly recommend! View detail
Simple style and elegant sound quality
The volume near the Idling is quiet enough to transmit quietly through residential areas and becomes pleasantly loud when turned. View detail
I'm being dry, but ...
First of all, installation is quite troublesome, especially if the Rear Carrier and Box are installed.... WiringCover- and Boots are not included for the high price. Although the wiring retractable part is designed to minimize water intrusion during mud splashing, there is a slight gap, so the part was treated with coking. After installation, it looks more expensive than other products (in fact, it is expensive...) and Parenthesis is good. View detail
Fits: KAWASAKI Z750RS, KAWASAKI Z1-R, KAWASAKI Z1000MK2, KAWASAKI Z2, KAWASAKI Z
retro
A nice peice of kit easy to fit a nice finishing touch for that early retro look, overall a good quality product that makes the bike look cool View detail
Fits: HONDA CB1100, HONDA CB1300SF, HONDA CB400SF, HONDA CBR1000RR, KAWASAKI Z900RS
unconcernedly
It is not noticeable, but I was satisfied with the texture. View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
Parenthesis OK
Simple and the texture was good. View detail
Black Megaphone Exhaust
In the past, Honda motorcycles were equipped with this Megaphone Type Exhaust System as OEM.
Remembering those days, we selected this Exhaust System.
It is made by MORIWAKI, so there is no problem with quality.
However, be careful with matte Black, as it scratches easily and stands out.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, KAWASAKI NINJA ZX-25R, KAWASAKI NINJA1000, KAWASAKI NINJA250, KAWASAKI NINJA400, KAWASAKI Z1000, KAWASAKI Z800, KAWASAKI Z900RS, KAWASAKI Z900 RS CAFE, YAMAHA MT-25, YAMAHA MT09, YAMAHA YZF-R25, KAWASAKI Z250, KAWASAKI Z250, YAMAHA YZF-R3, YAMAHA MT03, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
An improvement over oem reservoir cap
A drastic improvement over the plastic oem cap. The appearance of the item once fitted, really draws attention to itself, despite being so small. Such a shame that the stock protective plastic rear brake reservoir shield partially obscures the moriwaki logo device on the top of the cap. For the price this item is certainly value for money well spent. View detail
Replaced by 70mm→90mm
I purchased the 70mm, but because it was too short, I replaced it again with a 90mm.
I installed it on her Motorcycle ….
Material/quality is great, but the non-slip GizaGiza is quite Large,
The end side (outside) of the footpeg hooks onto the bottom of the Boots.
If you are not careful, you may get caught when lowering your foot and not be able to pull it out...
As a countermeasure, I wrapped several layers of masking tape around 2-3 cm from the edge to eliminate GizaGiza,
Vinyl Tape is then wrapped around the GRUGRU to eliminate the bumps.
As a result, he said, the back of Boots did not catch and it was easier to get his feet out of the way.
Maybe you don't need GizaGiza for the footpeg end.
Maybe I should take a sander and scrape it off...
View detail
Fits: KAWASAKI FX400R, KAWASAKI W650, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZXR250, KAWASAKI ZXR400, KAWASAKI ZXR400R, KAWASAKI ZZR1200, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI VULCAN 900 CLASSIC, KAWASAKI VULCAN 900 CLASSIC, KAWASAKI VULCAN 900 CLASSIC, KAWASAKI VULCAN 900 CUSTOM, KAWASAKI GPZ900R, KAWASAKI KLE500, KAWASAKI ZZR400, KAWASAKI ZX-4, KAWASAKI VULCAN-II
Functions are fine. Price is high.
[How is it used?
ZX-6R in 2023 MODEL.
The OEM filler cap was unusually stiff and difficult to open and close, so we changed it to one that opens and closes with a tool.
Was the one you received as per Image?
No scratches, with Sticker.
Was the installation difficult?
It's a pontoon.
It can be closed by hand, but it is recommended to use a tool to tighten it because it is difficult to apply Torque.
If hand-tightened, I would like to use at least Wiring to stop it from loosening.
How was your experience with it?
The quality is good and the Wiring hall is available.
However, Oil Filler Caps seem to be too expensive for any manufacturer.
View detail
bass-keyed
BlackSlip-on Silencer installation 。 JMCA approved products 。 The sound is more bass-heavy than in NORMAL. 。 Not sure about high rpm range as it is still breaking in. 。 Smooth blows up to 6000 rpm. 。 The volume is moderate, maybe a little louder than NORMAL. a little more than NORMAL 。 The lightness is only a little lighter than NORMAL, so it does not affect the Start dash. 。 Cornering, even on forest roads, there may not be much benefit from lightness. 。 Looks Good View detail
Very good exhaust silencer
Exhaust silencer is nice , good quality and easy to install. Bought this because it looks nice compared to stock exhaust and sounds good not very loud. No issues and really happy with my purchased. View detail
Titanium is light and great!
This is a change from the same MORIWAKI MonStar black. It is easy to maintain because it doesn't rust, and it is also good for weight saving. Titanium is still a good choice! View detail
Might be a little noisy.
I guess it's noisier than I thought.
Satisfied with the improved appearance.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB1100, HONDA CB1100 EX
It is easy to install.
Installation is easy and the Headlight area is Refreshing. View detail