Reviews
I removed the OEM Product to check the inside diameter.
The handlebar inner diameter of X FORCE is 17.5mm.
For products with a corresponding inner diameter of 13mm or larger, the Bolt must be tightened considerably to secure it in place. Some products with a corresponding inner diameter of 18mm or larger can be installed, but require some effort.
A little force is required to remove the Grip end of OEM Product.
It can be removed either by wearing non-slip gloves and relying on grip strength to turn it, or by grabbing it with pliersetc. to turn it.
The direction of rotation can be in either direction, as the Screw is not cut off.:Pair (for Left and Right) The connector can be removed by pulling it while turning it to "1".
View detail
Fits: HONDA CUB90
For the price, it's good enough.
One Side's Mirror was broken and I was looking for something close to it.:Pair (for Left and Right) I bought it when I found it. I didn't expect much for the price, but it was better than I expected.
The plating treatment on the screw threads makes it difficult to bite the first screw, but once the screw starts to rotate, there is no problem to fix it with Smooth. The mirror surface has no noticeable distortion and I am satisfied with it.
View detail
Effective when riding in a way that keeps the rpm high.
Recommended for those who run 70-80km/h Bypass roads at or above the maximum horsepower generating RPM and are using oil cooleretc. to prevent heat buildup. 。 We are installing it on a CUB. 。 The difference is about 1/3 of the change from Oil that has run 1000 km to new Oil. View detail
Elimination of long-standing problems
Product Name
MirrorOffsetHolder for 10mm
Item Number
27292419
Vehicles
Grom (JC61)
Number of man-hours
Around 20 minutes
Required Tools
Torque wrench, Hexagonal socket, Combination wrench, Pliers system
Why did you choose this product?
There were other products that extend the length horizontally, but this was the only one that also extends the height. Also, it was available in black and looked luxurious. Also, I had a feeling of trust in the product because Grom's name was mentioned in the Impression section.
Was the one you received as per Image?
It was just as shown in the Image. It looks good with a sense of luxury.
Was the installation difficult?
It was easy:just remove the screw, select the size screw that fits the screw hole, and install it.
How was your experience with it?
The long-standing problem of not being able to see Mirror has been resolved. I was worried about not being able to see what was going on behind me, and I felt it was a hassle to bend my elbows every time I had to do it. It was also very easy to install the pons without changing the position of the wiring such as throttle wire.
[Included Parts:were they on?
There were some things written on the documents etc., such as screws.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Cheap and bastard
Overall, the accuracy is poor.
Defective threads in press-fit Bolt.
I managed to turn it by eyeballing it.
Insufficient strength of Crimp pin.
Probably raw iron. It does not appear to have been quenched and tempered.
After Crimp, Pin swelled up and could not be removed from press-fit Bolt.
In the end, I had to repurchase a Brand item. I threw it away.
Study fee.
View detail
Installed on a JC75 Grom. Long-standing problem of not being able to see the back well has been resolved.
Many of you may have had a near-miss with the poor rearward visibility that seems to apply to most moped models.
Since the handlebar width is narrow due to the small size of the vehicle, the OEMMirror is too far inward to see the back of the vehicle due to the obstruction of one's arms and shoulders.
Depending on the shape of the Mirror, it can be much better, but still, your body will be slightly reflected in the Mirror.
This product can be attached to the base of Mirror to offset Mirror to the outside for rearward visibility.
Material:It's Aluminum and lightweight, so it doesn't affect handling.
Bolts of M8 and M10 are included and can be installed on most motorcycles. Some models may require an Opposite Thread Screw Adapter.
My impression of the installation is that my arms used to appear in Mirror, but now only the back of the camera is completely visible.
It is ridiculous that I have had to put up with this for three years now.
Of course, the Mirror is Offset to the outside, which will affect the slip-through. You are on your own in this area.
It is considered a good product with excellent cost performance.
View detail
(There is a slight effect at 6k to 10k rpm.
I bought it a while ago and installed it because of the cooler temperatures.
There is a slight effect at 6k to 10k rpm, but few people may be able to experience it. 。
If the RPMs drop on an uphill climb, the drop will be slightly less.
It is similar to the performance difference of replacing the Plug with a NORMAL??Windshield IRIDIUM, so there is probably only about a 1% difference? The difference is only about 1%.
The specific Merit is when you are on a Corner with a bumpy uphill gradient etc. and you are wondering whether to pull in 3rd gear or 4th gear.
A Stainless Steel Band is included, but when maintenance is a top priority, the Gold Stainless Steel needles are more convenient in some areas.
This is especially recommended for SmallEngine Displacement Volume.
View detail
Very ordinary Mirror, but great cost performance!
I purchased this product because the Gold Frame Mirror that came with my current Motorcycle when I purchased it has rusted away.
The texture is THE NORMAL" It is so extremely normal.
It is not outstanding, but it is not bad either.
There are no complicated adjustment functions, so you can adjust the field of view with one hand while waiting at a traffic light.
The field of view is better than that of other brand products with more unusual designs, but it is not as good as products that claim to have a high field of view.
This is also quite normal.
The target buyers are those who do not want to spend a lot of money, those who are satisfied with NORMAL products, and those who dislike complicated adjustment functions.
As a general comment, I think it is an ordinary product with no flaws at all.
View detail
Fits: HONDA CUB90
I bought this for my SUPER CUB.
Maybe I'm not putting it on the right way.
Unable to install
I put it in the shed as it was…
View detail
Fits: HONDA CUB90
If you're not particular about it, it's a push.
Normal look, and cheap anyway!
It may not suit fashionable CUB riders, but it has good rearward visibility and no complaints for me.
View detail
สติ้กเกอร์สวยครับ ขนาดกำลังดีติดรถได้หลายคันเลยครับ View detail
Fits: HONDA LIVE DIO AF34, HONDA LIVE DIO AF35
Cospa good
I purchased this product because of the discontinuation of OEM. The durability is yet to be determined, but the texture is comparable to the OEM. View detail
Fits: HONDA LIVE DIO AF34, HONDA LIVE DIO AF35
AF35 LIVEDioZX Meter panel
Many of them are BALI, etc. The texture was chunky compared to OEM. I think the cost performance is good. View detail
Fits: HONDA Universal, SUZUKI Universal
EnergyPrice EnergyPrice for HONDA & SUZUKI Oval Mirra
Cosmetically outstanding.
The range of motion is small and may be slightly difficult to use.
It is a range that can be forgiven if the price is taken into consideration because the function is fulfilled enough.
Quantity:Pair (for Left and Right) I'm surprised at the price.
View detail
Fits: SUZUKI LETS2 [LETS] CA1PA, SUZUKI LETS2 [LETS] CA1PA
LETS II
The installation requires some modification and forceful installation, but considering the price, it was the right decision to purchase. It was within the expected range, so I have no complaints. View detail
Fits: HONDA CUB90
Cheap mirrors with acceptable quality
I bought these mirrors to replace old cracked ones. For such a low price, the quality is quite acceptable. There is even a little more chrome than on native mirrors, since on relatives the clamping nut is ordinary and closed with a black rubber cap. On these mirrors, the clamping nut is specially shaped and chrome plated, so it looks much prettier. I did not notice much difference in the review. I bought these mirrors to replace the old cracked ones. For such a small price, the quality is quite acceptable. The chromium is even slightly more than on native mirrors, as the usual pressure nut on native mirrors and is closed with a black rubber cap. These mirrors have a special shape and chrome nut, so it looks much prettier. I have not noticed any particular difference from the overview. translated by Google Translator View detail
EnergyPrice JOG 3 KJ Side Mold (R/L Set) Black
Good Quality fits perfectly for my Yamaha jog artistic. Some adjustments on screw panel but overall good and fitted. Will order again from energyprice. View detail
Cosmetology is good, but ………
Installed on my friend's APRIO
Uh, yeah
It's cheap
Screw holes don't fit, the gap is quite wide
I think Ime-Chain would be a good idea
I wouldn't buy it if I were you
View detail
Fits: YAMAHA JOG 3KJ, YAMAHA JOG [JOG] 3KJ, YAMAHA JOG [JOG] 3KJ
Excellent quality
The fairing kit for yamaha jog 3kj is of excellent quality and very affordable price. Original parts pattern or even better. I recommend it without a doubt. The fairing kit for yamaha jog 3kj is of excellent quality and very affordable price. Standard of original parts or even better. I recommend without a doubt.(translated by Google Translator) View detail
Cheap
This price is this price! It is exceeding the degree of satisfaction. (Lol) And for Yamaha and Quantity : Pair (for Left and Right) It is saved by this price because it makes it easy to do it in Motorcycle which I use for play. Recommendation! View detail