Reviews
OEM same etc.
I bought it because it is a little cheaper than OEM.
The product was installed with no modifications and the quality is good.
View detail
Light weight around Light
I purchased this product to save weight and appearance because the OEM headlight surround was cracked.
The installation method has been posted on other sites, so even an amateur could install it without any problems.
As intended, it has reduced the weight, but as a function of the Light, it is better than nothing. The beam coverage is narrow, and we do not recommend driving at night.
View detail
Mounts more securely than expected.
Installed on klx230.
OEMHeadlight is bright and nice, but I'm still disappointed in its appearance…
That is why I purchased this one.
The installation is almost a simple installation.
I was concerned about the brightness, but perhaps because I had originally replaced the bulbs with LED bulbs, I do not have the impression that the bulbs have become that dark.
The top part of the bracket was attached with a rubber bush to the extra hole in the Headlight Bracket on the body side, instead of the Elastic band that comes with the bracket, so the bracket does not move up and down due to vibration.
Handling is also lighter and very recommendation.
View detail
Good to use, necessary and sufficient
I installed it on my yz125x. I was hesitant to install ACERBIS because of its thickness and price.
This is a simple design, but I bought it because of the price and because it seems to be less affected by the thickness. I don't mind the shaving.
I think it's a good thing that I don't have it because I can work without removing the guard when I remove the seat frame for maintenance. I like it!
View detail
Hand guard parts
I never expected to find the Poly sports hand guard repair parts I was looking for on Webike.
I was thrilled because I had given up halfway through.
View detail
Fits: BETA RR 480, BETA RR 350, BETA RR 250, BETA RR 300
It protects the Swing Arm from rocks.
Installed because I hit the Swing Arm at a rocky area. I had to cut it down a little because it interfered with the external brake pedal. View detail
Fits: BETA X-TRAINER 300, BETA RR250 2T, BETA RR300 2T
Before cracking the Case.
Installation is easy and not difficult. It protects the Case from falls and stones. View detail
โอเคครับ สวยได้ของตามสั่ง View detail
ได้ของตรงตามที่สั่ง รอของไม่นาน View detail
Fits: BETA RR350 4T, BETA RR300 2T, BETA RR250 2T, BETA RR125 2T, BETA RR480 4T, BETA X-TRAINER300, BETA RR430 4T, BETA RR390 4T
Easy to install
The fitting is good and it goes on easily. View detail
Fits: BETA RR 250, BETA RR 300, BETA RR 350, BETA RR 400, BETA RR 450
Cheap and reviving
The fitting is good and for the price it is a good product, although some parts are a bit crudely made.
Decal Kit can also be applied normally and has the effect of improving the appearance.
View detail
BETA RR2T
Purchased because the exterior of my BETARR2T was scratched up.
Rear area is the same shape as 13~, and SIDE, shroud, and front area are the same shape after 20 years.
View detail
Installation is the key.
The ribs need to be bent extra tightly before installation so that they will not stick to the chamber.
I chose Orange to match the color of my car, but I regret that Black would have looked better with Parenthesis.
View detail
In MOTARDFender, best recommended
[How is it used?
Installation Type:D Tracker
Traveling:Touring, mountain passes
Replaced another company's MOTARDFender. Used for about 4 years after replacement.
Was the one you received as per Image?
It's just like the image. I've been using it for a few years now, and I'm very happy with it.
Was the installation difficult?
This product has holes drilled from the start, and its unique hole alignment system makes it easy to install, not only for the D Tracker but for a wide range of car models.
For mounting angle adjustment, a washer was used.
How was your experience with it?
The style is large and strange, and I've used about three social Fenders, but this is the one with the best parenthesis appearance.
The D Tracker has a large Radiator area, so I didn't feel much benefit from it, but I can easily see it becoming a Plus.
I also felt that it was cosmetically sound and would be easy to replace if damaged.
[Included Parts:were they on?
See product description.
[Was there anything that disappointed you?
None
Point and hang of installation
When installing an external fender, it is recommended to use a stainless washer of size M8 and above to adjust the final installation position. This will allow you to adjust the installation angle to avoid slight interference with the frame.
When I introduced the external Fender, I was adjusting everything with Washer.
For the washer, it is easier to use Aron Alpha's instant adhesives to align the holes and temporarily attach the washer.
View detail
Installed on KLX250.
I'm very happy with the large size and the mud splatter is reduced. View detail
Refresh around Light in D Tracker
Refreshed the Light area of the D Tracker I purchased.
It was originally equipped with ACERBIS Light, so I was able to install it without any problem.
View detail
Consumables?
I don't remember how many years after I bought it, but I got rid of it after about 3 or 4 years of use. It might be revived with a good Chemical, but the gap under the Headlight also bothers me, and the reason is that the OEM Product seemed to be of better quality than anything else. Durability. View detail
Fits: HUSQVARNA TE250, HUSQVARNA TE125, HUSQVARNA TC125, HUSQVARNA FE450, HUSQVARNA FE350, HUSQVARNA FE250, HUSQVARNA FC450, HUSQVARNA FC350, HUSQVARNA FC250
Mounted on TE250
I always ride HUSQVARNA's TE250 for forest road touring and hill climbing.
After about a year of use, the exterior of the car was getting worn out and the fork guard was getting cracks. I tried to order the OEM exterior, but it was very expensive. I tried to order OEM exterior but it was very expensive.
Now I can ride my motorcycle in Paris for another year.
View detail
Fits: HUSQVARNA FE250, HUSQVARNA FE350, HUSQVARNA FE450, HUSQVARNA TE150, HUSQVARNA TE250, HUSQVARNA TE300, HUSQVARNA TX125
Exterior Set Replacement
I always play with Enduro and Hill climb in the forest road touring and course.
Especially on hill climbs, you'll be turning your motorcycle over and dragging it around, which can quickly hurt your bike. Especially the exterior.
It's been about a year since I started riding, and the shroud is cracked and the side cover is damaged, so I replaced it.
I was able to install the Bolt On securely.
This kind of Kit is called Quantity:It was sold in Set, and I changed it cheaply, so it was very helpful.
View detail
ได้ของครบทุกชิ้นครับแถมราคาถูกอีก View detail