Reviews
Carbon Style.
Material:Although it was written as Carbon, it seems to have only put Wet carbon on FRP at the front side.
Accuracy is poor, so if you drill a hole in the large texture, the installation will be smooth.
Large in sturdiness, this Carbon is easily drilled.
View detail
Maybe it's an individual difference, but …
I thought it could be installed as it is because it is the same shape as OEM parts, but it is not the same as Tire. The Clearance is only a few millimeters, so if you lightly press the Fender from above, it will interfere with the Tire. I'm done.
I don't think it will interfere if you don't push it down, but it's obviously narrower than the OEM. I'm going to use Spaceretc. to get a gap.
In addition, the shape of the screw hole is hollowed out for the head of the screw in the OEM, but it is different from the OEM. If you are worried about the damage around the screw head when you tighten it because it has only a screw hole. is a caution.
The surface is a nice mesh Carbon but I don't care because you can't see it. The handling of the side was quite appropriate.
Because of the individual differences, there is a little bit of fitting difficulty. I think it's a good product because hopefully it can be changed to Carbon in the same shape as the OEM.
View detail
Parenthesis is better than an image
The real thing is more black and twilled to the extent that even from a distance you can tell that it is Carbon
You can get a lot of attention from your surroundings, regardless of performance
Just buy a good Screen too
I couldn't fit the screen in well when I bought a screen of about 2000, and I almost broke this one lol
View detail
Fits: SUZUKI For GSX-R1100 upside down fork, SUZUKI For GSX-R1100 upside down fork
NOT THE ITEM IN THE PICTURE
The item in the picture is not the item i received,if i wanyted a fibreglass guard i would have purchased one in my country for half the price,the photo is dishonest and misleading,,the guard is good quality. Not happy View detail
Very good
It's thick and solid, but doesn't feel heavy
The shape is perfect, but there's also a problem on the Screen side of things as to whether or not the holes in the Screen fit Maybe?
I was surprised that I didn't expect to receive something of this quality at this price
The surface finish of the Gel coat is also Beautiful and looks like it will be ready to move on to painting
View detail
Cost-effective?
The quality is good for the price!
Carbon is also in use beautifully and has no problems I think it's a good idea to ask the Shop to install it or two people to do it
View detail
There was distortion. Individual difference?
I purchased it with reference to good evaluation of COSPA.
Quality is satisfying with price.
The texture of Carbon is beautiful.
However, when I installed it, something does not work. If you look closely well FenderBody has some distortion Quantity : Pair (for Left and Right) There was a difference of only a little less than Mounting Bolt of. Although wearing was possible as it was, it was not convinced, so I looked at it from the front Left Side Biting Spacer on Mounting Bolt Quantity : Pair (for Left and Right) Hitoshi etc. It was mounted at the height of. Result Calm down to the feeling that distortion does not matter. A person who needs Quality of OEM Product needs a little care.
View detail
It is the same shape as OEM
I installed it in SOQIInverted Front Fork of XJR 1300
This inverted Fender has the same shape as carburetor R1
Cutting part of Fender support department
The rest is the same.
The product is thin and obviously lighter.
Some bubbles were contained. Because it is in a prominent place
It is a star 4.
Although the dimensional accuracy is reasonable
When relocating Rubber Bush from OEM
Even though it is thin and tightened with Bolt, it hits Gold color
Because Fender was rattled
Gold genus was cut by 5 millimeters.
Rubber Bush can be crushed and attached securely.
View detail
Both appearance and cospar are Very Good!
Products made by Sting R & D company are of course not only looks, but since the Gold amount of the buyer's eyes is set even among Motorcycle Parts Manufacturer who is circulating with a high price more than anything else, since Dress-up can be done without stretching up, the search ranking in the future I am thinking in 1st place. This time, I think that the purchased product is one item of Recommendation even if it looks comprehensively without the necessity of processing. View detail
The price
OEM Replacement Type, but the width and mounting hole position did not match. For width it is possible to install if it is prepared for deformation, but it is safe to put a thick RubberWasher or something in the gap between Body and Fork. I am one Side 5? (Quantity : Pair (for Left and Right) I wrote a Rubber Seat of 1?). Even this still has some margin (>_<). As soon as you set the taking hole as it is, it gently becomes an off car Fender Since the position became high, 2 on the F side and 2 on the R side. 5? I opened the hole upwards and managed somehow normal installation. Since the original size was adjusted, the original hole on the F side can see an elliptical shape that has been scraped, but now it is one so I will refresh the lower part of the Fender side as well (T_T) It is cheap and its shape is not bad with the OEM but it can be made a bit better ~ " (-""-) " View detail
Cut is not so good
I compared it with OEM Product. Making itself is nice, but Quantity : Pair (for Left and Right) It is mandatory to rework with half finish as if being cut asymmetrically. Cut too much, or Cut finished halfway .... If you can not fix it yourself, please purchase OEM Product. View detail
Large whispering yoji ...
By saying "Other Company Product", it is clearly stated as two Nuts, but I hate direct Nut hitting Carbon fender, I removed Bracket from OEMFender and ported it perfectly to Front fork etc. etc. Despite being tightened to, the Tire clearance before and after is Quantity : Pair (for Left and Right) Asymmetrical and immediately removed.
I sent a wearing image and asked for a replacement but I am sorry to refuse Bassari when I can not exchange after processing.
Material : Carbon products are prepared to individual differences, but just spreading the mounting hole in the hole of OEMBracket has no reason to cause a whirlpiece, which is not unpleasant, but I will never buy it again. Those who buy it because it is cheap are advised to check with the Manufacturer recommended way of attaching and checking if there is a whirlpool and to put in Objection.
View detail
Cost performance It is high !!
The OEM Fender installation part has broken and it is a replacement.
Although it is a translation to replace OEMFender when installing, OEM will interfere with Fork when removing. And it was possible to put in this product with little interference..
It is an impression that it is because it is thin with Carbon?.
Also in the OEMFender there is something like Stubby made of iron, I am addicted to the mounting hole from the back.. This item has good hole position precision, it is very convenient!
Fender Outside Material : The accuracy of the mounting hole of AluminumStubby is also naturally good, but there is a gap between Stubby and Fender. Even if you look closely at product pictures, there are gaps, so it's like this is not it!. I wanted you to be hooked as much as possible, but I guess it would be worthwhile considering the price ....
And AluminumStubby has a hole to catch at the rear center, but Fender has no hole. Also there are no mounting holes for parts to pass through the Meter cable, so you need to open a hole if you care. I just installed it, but it seems there is no problem in use.
Finally, there was also in other people 's impression, but when it hits the sun, parts that can be seen are seen there so much !! I became worried and painted with a matte black from the back and solved the sheer.
There are parts to worry about, but considering this price there is no problem at all !? (Lol)
View detail
Cospar good
Although it is an OEM Shape, there is no Light hole or Bracket
Screen mounting holes and Cowl mounting holes are merely open
Hole etc etc for competition vehicles. It seems to be just right as it seems to be unnecessary
View detail
ZZr1100 Carbon Font Fender
Try purchasing, first thought I was thin. Although reinforced with FRP, it is doubtful how far it can withstand wind pressure. Installation is also OEM one point 3 point stop against 2 points stopped and can not fix and move with the graffiti. I thought that I could not bear to practical use, so I decided not to use it.
View detail
Very light
Purchase at Cospa. Carbon twill is beautiful in the table.
There is a place which is transparent to Madara when passing light from the back, it is transparent
We reworked the part from behind with Paint. Without it
Wonder if it was five stars..
View detail
Fits: SUZUKI For GSX-R1100 upside down fork, SUZUKI For GSX-R1100 upside down fork
It is Imechen from fading
Although it was GSX purchased in second hand, it was originally Red's Fender, but fading severely to Salmon pink ...
Because I wanted to put out a sense of custom as well because it is not as good as it appears, select this.
There are still several options, including other companies, that are compatible with late oil cooling, but everything is expensive.
In such a situation, this product was able to purchase with confidence, price setting close to half price compared with those here.
Actually, there are memories that we did not deal with at Webike at that time, sorry if you missed it.
I ordered directly from STING.
There is a memory that did not take delivery as long as a month.
Looking at the picture, I was wearing it in about 2 weeks from purchasing the vehicle.
The making itself is polite, there are neither strange scratches nor dents.
However, recently I noticed distortion slightly at the tip when I saw it from the front.
Nonetheless, I do not feel honest.
We have not noticed it for more than a year (wry smile
Also, as a point to watch out, if you overly tighten Bolt at the time of wearing, Crack will enter the resin layer that is Coat on the surface, so Torque will be conservative ...
By the way, because we are removing the Brace on the inside of the OEMFender, it's wearing Material : Combined with Carbon, it becomes very light!
It also affects the sense of operation, so this is a very grateful part.
Even though it looks cool, this price is satisfying Large.
View detail
Looks, Race ish!
When I changed my faded Front fender, since Rear Fender also got out from STING as well, it was changed at the same time.
OEM's Rear Fender was also quite tired with aging, so it was just good feeling.
The shape is exactly OEM, so we just change it without thinking anything.
However, the Slit part is not opened, it is a matter of creation.
I also thought about processing, but I did not dare touch it because I did not do much less stuff and it became a scarring thing.
Front fender did so, but the plastic part that coats the surface is not so strong, so be careful not to overtight Screw.
Plus screw, so I can not put a strong Torque, but even if I do it in a retightening way, a little Crack has entered.
Also, when installing, OEM Screw, Spacer will be used as it is, so it is better to change it to a new one as well.
It seems that it is a carbon land, but just replacing OEM's resin Fender including Luster makes it very tight.
Because it is an old car body, its Large carpet makes me feel uncanny, but even if I change it to this, still Race ish will come out.
Although it is good to take it like Racer, after all it is town ride Main, as it winds up from the ground and runs in rainy etc.. , It is necessary for more than Dress-up purpose in order to prevent flip up from Chain.
As a choice other than homebrewing and processing, is not it a good Items.
View detail
These are excellent and the fit is perfect. The carbon fiber is a tight weave and looks really great. High quality product.
These are excellent and the fit is perfect. The carbon fiber is a tight weave and looks really great. High quality product. View detail
very poor quality . dimples and marks in the finished carbon face . over lapping cut marks where the mudguard had been cut for where the folks would pass through it . would advise spending a bit more money and receiving a much better quality item
very poor quality . dimples and marks in the finished carbon face . over lapping cut marks where the mudguard had been cut for where the folks would pass through it . would advise spending a bit more money and receiving a much better quality item . very cheaply made mudguard but yet wasn't cheap to buy . View detail