Reviews
Fits: HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
Cost performance is the best!
The handlebar grip on my HarleyShovel head was a barrel-shaped, pushing stiff and extremely thick, so I purchased this moderately soft and brightly colored grip.
It was surprisingly difficult to remove the existing grips.
Slotted screwdriver was screwed into the gap and parts cleaner was used to remove the grip bond.
Installation was very easy, it was a little loose so I sewed Grip bond to hold it in place.
I think the texture of the Grip is good, a little cheap-looking, just right for an old car.
NeoFac's for inch barGrip is very affordable and we thought it would be a good idea to Stock a few.
View detail
useful
Easier and faster than soldering. This is sufficient for non-critical areas. View detail
Fits: HARLEY-DAVIDSON Tourer model with CamSensor, HARLEY-DAVIDSON Twin camMODEL
I was able to purchase with confidence.
The cost is low because it is made overseas, but the manufacturer is reliable.
Installation requires Special Tool and some expertise.
View detail
carburetor tinkering
The OEM +Screw was not safe to work with as it was easy to get caught in the screw. 。 The large width provides a greater sense of security when tightening and is easier to maintain. View detail
Fuel fliter
I bought this because I frequently get Garbage in my carburetor and it clogs up frequently! 。
The installation was easy and the filtration was good.
View detail
Fits: HARLEY-DAVIDSON Universal
It is inexpensive and appreciated when using larger quantities.
[How is it used?
When I restored my Honda XR250, a famous car from a bygone era, I found that the external exhaust system that had been installed since the day I received the car was not working properly in today's environment. Noisy Exhaust System. I purchased this product to muffle the sound as much as possible because it had become a
Was the one you received as per Image?
It was exactly as it looks, Glass Wool (GlassMatte), so it was just like Image.
How was your experience with it?
"twill weave" The fabric is not woven into the fabric like other fabrics, so it is easy to unravel, which is both a merit and a demerit.
The price is low for that reason, and it is a very nice product when you want to use it in Large quantities.
[Points to note]
If the frayed glass fibers get on your skin, they will sting, so it is best to wear disposable rubber gloves and avoid exposing your skin to the elements when working.
It is even safer if you also wear a mask to avoid inhaling through the nose or mouth, as they are easily disintegrated.
How did it compare to other products?
It is a large quantity and inexpensive, and is a great product for use in exhaust systems and other sound deadening measures.
Other items that would be helpful
Point and hang of installation
However, if the coil is left rolled and assembled without being secured, it will be unevenly distributed due to exhaust pressure or will gradually scatter during driving.
After winding the tape strongly, I think it will last a little longer if it is wound GRUGRU with fine needle goldetc. to prevent it from shattering.
[ITEMS TO BUY TOGETHER
However, it is important to prepare tools for disassembling the Silencer part of the Exhaust System (Chamber) (Drill for disassembling the Rivet stop, Riveter for assembling the Rivet stop, and Rivetc. of appropriate size). Riveter & Rivet of appropriate size).
After that, it might be a good idea to have a fine needle Gold as mentioned above.
[Opinions and requests to Manufacturer
I have purchased several times because of the quantity and low price, please continue to offer them at low prices.
View detail
Fits: HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily
Periodic replacement of consumables
Sufficient as an alternative to OEM Product. The best thing is the high cost performance. View detail
No Color inferior to OEM
It has been 9 years since I bought my new car, and I decided to replace it with a new one. After the installation, the vibration of the engine was clearly reduced, and the effect is sure to be effective. View detail
MeterSensor
I was a little concerned about malfunctions, etc., because it is an Other Brand Product, but the quality was the same as OEM. View detail
Good looking !!
This kit makes the appearance of your bike more aggressive and look like semi chopper !!! The finishing is quality View detail
Different sizes
I purchased a different size, but this is the only one I would choose for Fuel Hose.
Products less expensive than this have low weather resistance and may harden or tear, so if reliability is important, high-end products should be used.
This probably will not deteriorate and tear in about 10 years.
View detail
Fits: HARLEY-DAVIDSON
countermeasures against heat
Exhaust pipe cooks the Right leg to about Medium rare, so I bought it for good measure.
To be honest, 2.5 LE/G is only a little better at this level.
I added a heat shield to the back of the Heat Guard, put a Ceramic washer between the fixed bolt, and put a leg cover on the human side. But it is still very hot.
My favorite to look at.
The process is not difficult, but it is tedious. If you are patient and carefully soak it in water, you can roll it up beautifully.
View detail
Perfect!
It works perfectly, and that's OK for now! View detail
I guess I could substitute something else, but it's cheaper.
[How is it used?
I use it to prevent the STAND from slipping into the ground and the motorcycle from falling over when parking on uneven ground, such as at a camping site at the end of a touring trip.
Was the one you received as per Image?
The material of the coaster is probably ABS plastic. The diameter is 160mm and the thickness is 6mm.
How was your experience with it?
It is sturdy enough to withstand even an FZS600 with a total weight of over 200 kg. There is a hole to put a string through, so it is good to hook the string to a handlebar or something to prevent it from being left behind.
[Points to note]
There are two protrusions on the top surface of the Coaster, and the STAND is inserted between the protrusions, but the distance between the protrusions is too wide, so the protrusions are not very useful. And since the top surface of the Coaster is slippery, it sometimes slides when I step on it with STAND. So I cut out a 5mm-thick rubber sheet, put it between the protrusions and fix it with superglue, and put the STAND on the rubber sheet.
How did it compare to other products?
There are products that can be used by mounting on the STAND side, but I decided against it because the ground contact area is too small and I am not sure about using it on uneven terrain.
Other items that would be helpful
Point of installation and hang:It is better to use a string through it to prevent misplacing it.
Opinion and request to Manufacturer:It would be better if the top surface of the coaster has a non-slip coating. Also, it would be better to have a bright color (White or Yellow) instead of Black, so that it would be harder to leave it on the ground.
View detail
Fits: HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
goodgood
I am so very satisfied!!❤️
I think it came in 4-5 days after I ordered it. The packaging is neat and the line is so pretty. People around me say they like Neo Factory, so I buy it. It's fun to customize. I will use Neo Factory often next time too hehehe
------------------------------------------------------------ -------- I'm so satisfied !! ❤️ I ordered it in 4-5 days. The packaging is clean and the line is so pretty. It's so good to buy Neo Factory around. Powered by Google Translator
View detail
Fits: HARLEY-DAVIDSON Universal
สวยงามตรงปก ส่งไวมากกก ขนาดมาจากญี่ปุ่น ขี่เร็วๆยังดูรู้เรื่องอยู่สั่นน้อย ขนาดตัวกระตกใหญ่มองได้ชัดเจน โอเคเลยครับ View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily
The handle is sturdy and nice.
Mounted on the 883r.
It is possible to install it on a genuine cable, but it is a bit cumbersome.
When assembling, it is possible to assemble it in the correct order.
It's 8.5 inches, so the handle height is just right and it's comfortable to use.
It feels good to drive.
I will use it well. ------------------------------------------------------------ -------- Equipped with 883R. It is also possible to mount it on a genuine cable, but it is a little bit extraordinary. It is necessary to assemble the order well when assembling. It's 8.5 inches, so the handle height is also suitable and good for use. I like driving. I will use it well. Powered by Google Translator
View detail
Fits: HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
I bought red.
I bought the red grip.
I was going to buy the white, but I bought it because the car color was red.
It's not that old-fashioned and the grip is very good.
I think I'll have to buy a white one next time and install it.
It's a little tight when you put it in, but when you turn it, it goes in well. ------------------------------------------------------------ -------- I bought a red grip. I tried to buy white, but I bought it because it was red. It's not so rustic and the grip is also very good. Next time, I think I should buy and install white. When you put it in, it is a little tight. Powered by Google Translator
View detail
It fits the grip perfectly.
It fits perfectly into the buckhorn handle.
When assembling the cable, it goes in without much difficulty and fits well.
When you put the grip on the throttle, sprinkle a little wd on it and it's easy to put in.
It won't be that difficult to add another grip later.
For those who need it, it is just right, so use it well. ------------------------------------------------------------ -------- It's just in the handle. When assembling on the cable, it fits well without much difficulty. When you put a grip in the throttle, sprinkle the WD slightly and add it. It won't be so difficult when I put another grip later. If you need it, it's just right. Powered by Google Translator
View detail
Thicker than OEM
Cannot pass through hole in Crankcase, making it unusable. View detail