Reviews
ชิ้นงานสวย คุณภาพดีเงางาม View detail
Adjust Mirror position
Spacer is included to accommodate multiple handlebar diameters.
Because of the Spacer of the genus Gold, it may damage the Handlebar in some cases.
Convenient for adjusting the angle and position of Mirror.
View detail
Opposite Thread Screw Adapter
I purchased the Opposite Thread Screw Adapter because it is essential for Yamaha cars.
However, the Mirror position is higher due to the Adapter, so it would be better to have a lower Adapter.
View detail
Design is good
This is a quintessential Tanax.
It is an itchy product.
Quantity:I would be more than happy if they were sold in 1pc. units instead of 1 set of 2pcs.
View detail
I used it for MeterCustom in DAX.
When replacing the DAX Meter with a Takegawa
I used it as a mount base to the Handlebar.
Compact both horizontally and vertically, so you have a lot of flexibility.
It's easy to see and I was able to put the Meter in just the right place.
I think they are the same as the Navigation Holder Parts, but they are 22.mm and 25mm.
It can be used with both Handlebar, so it is useful for Custom use.
View detail
The Adapter for Shark mirror
I bought the Shark Mirror 4, but the Brake master cylinder seems to interfere with it, so I bought this one. It is a solid construction because it is made by Tanax.
However, for some reason, the screw on the Mirror side has a forward and reverse Quantity:Set。
Quantity of positive and positive or reverse and reverse:I think that the lack of Set is not a good thing cosmetically. I wanted the reverse and the opposite, I had to buy two.
View detail
Expected
I bought and used it as a spacer because the mirror position of other companies is low. I am satisfied with the sense of unity that I cannot think of the other company's product. It is convenient if there is a little longer use. View detail
Installed on TOWN MATE 90
I bought it because it's a Yamaha Motorcycle and it's an Opposite Thread Screw
The OEM was broken, so I replaced it with the Mirror of Napoleon On as well, but it doesn't come on without it.
I bought the Plating one because Mirror is Plating, so I matched it!
The Mirror is a little higher, but I had no problem with it.
I also added Bracket Boots as well, so I guess it was just as well.
View detail
Repeat
I had the same one on, but I had to repurchase and reinstall it to change the angle.
However, the bolt is too thin and the torque-tightening torque is not enough, and when the weight exceeds 100kg, the Mirror turns around due to wind pressure.
It's a shame that it's so weak.
I drilled the hole to the Handlebar and screwed the Bolt in.
Last time I was cutting from the top and there is a hole in the handlebar, so this time I cut from the bottom.
If you do this, you won't be able to fine-tune it and you won't be able to get it back, so make sure it's in the Mirror adjustment range and drill the holes.
I... No one does. (+o+)
View detail
To avoid the Master CylinderTank
When I bought a Tanax Napole OnMirror and tried to install it on the GSX-S1000F, it interfered with the Master CylinderTank of Brake and I couldn't install it, so I bought this Adapter and added the height to it.
Although there is nothing to write home about in terms of performance, I think Tanax is a reliable manufacturer that you can buy from in the sense that they have such parts that can be fine-tuned.
View detail
Reactly for Low typeMirror visibility
Used for HUNTER/Low AndNarrowMirror
I liked the design, but the Mirror is so low that you have to look into it to see what's behind you I was wondering if I should replace the Mirror as I didn't have one, and then I found this product
The result is very good visibility
It was easy to install with good accuracy and I recommend it
View detail
Repeat
I bought it again because I bought it before and it was good The installation is solid, so I bought a bracket for different purposes on top of this one and the Camera I put it on and load my phone on it The other Holders feel too delicate to use anymore View detail
The height got out and Mirror became easier to see.
I had attached Mirror damper of POSH so far but it got broken.
I was looking for an alternative. Mirror damper was sluggish for this.
There is a height, Mirror is also easy to see.
View detail
Mirror high
At the time of handling, Left's Mirror hits the arm at all times and Mirror moves sometimes, so I bought it for fixing a little high. Yamaha exclusive use Quantity : Pair (for Left and Right) I bought it with. View detail
Pay attention to mistakes buying! Let's see the plan of the product!
I misunderstood the information on the product name of Tanax and received it, mistake in purchase (Upside down Screw diameter) I did it..
In Tanachi "M8 -> M10" Is an adapter that converts M10 to M8.
ProductNo for those who want to make LITTLE CUBM 8 OEM Mirror M10 Mirror 【C-1 or CM-1】 Is correct. C-2, CM-2 are wrong.
I was convinced for the first time by looking at the image of the plan view at Webike to buy again.
Originally the product title of Tanax is confusing.
Although I commented as a bad point, the expression method of the product is too bad.
In this case buy mistake victims should come out. (I gained momentum for Large on other purchase sites)
The product is just installed, so corrosion resistance is the future verification.
View detail
Looking for ease of view
I installed it on MONKEY.
Mirror has changed shape,
Because it was difficult to check backwards
Since it was that the range that can be seen increases as the height is raised, I bought it.
As a result of installing, I think that feeling became easier to see.
The part where the shoulder was reflected so far became visible to the back, so it is not bad.
However, it is not SMART as an appearance.
Although it is 20 mm Up, there is a feeling that it has been upgraded as it is.
However, since you can also choose the color Black and Plating, you can choose according to Mirror.
I think that it may be cheaper to make a little more gold.
However, since it is a gold amount that does not hurt even if you think that it is subtle, it may be that you try someone who is hard to see Mirror now.
View detail
Installed with Mirror of Mukawa in Grom
It is only 2 centimeters, but I felt it changed quite a bit. It is my impression, I think that it became a little safe.
Originally, Mirror of Grom is a round type, but it is changing to a long side. As you can confirm the backward without dropping the line of sight a little, as you can see the back at the height close to the shoulder, by thinking that Mirror is upwards, I think that the reflection of the arm will decrease a bit and replacing it Was.
In addition, somehow, I think that I can ride my posture well.
I do not even feel that the tremor is great. (I think that it also affects because I attach Handlebar Brace and Hand guard. )
View detail
8 mm to 10 mm
I will convert the diameter of Screw at the base of Mirror, but since it was attached to Mirror, I did not use it after all.
However, if it has this, it may be quite useful. I can use it in other places.
Making is good.
View detail
Used for for BMW
There was for HARLEY, but I used it for old BMW. It was also perfect for Size. The choice of Mirror spreads. BMWOEM's Round Type Retro feeling is also good, but the backward visibility expands and the safety gets broader. View detail
I made it same Manufacturer as Mirror
Cheap Stainless, Silver colored things are rolling around the house ...
Anyway, I tried to make it the same Manufacturer
Since I attached Stay boots after this, I can not see it ... w
If both Mirror and Adapter are those of Napoleon company, it is good to have a sense of unity!
Until now I have attached Adapter or whatever I'm rolling appropriately as it is good for now, but as expected I thought that Silver color Adapter in BlackMirror ...
Scooter is often hidden by Stay boots, but it is a place that you can see as a normal Mission car
Recommendation!
View detail