Reviews
Purchased for Color change
I bought this because I wanted to change the color of my Tank.
The reverse side is slippery, so I didn't get any scratches on the Tank when I installed it.
The fitting is perfect, and it is indeed Saigaya.
View detail
Tail cowl
No matter how many times you moss it, it won't crack.
Good strength
View detail
Twill Weave Carbon
The Twill Weave Carbon is also a good parenthesis. 。
I was most worried about the fit, but it's Exactly right! It's Cold Press Processed and the reverse side is smooth and the tank seems to be scratch resistant.
View detail
The lower body is stable when riding Sports, but the stomach gets stuck when Touring.
In Circuit driving, many people wear a Pad that prevents their hips from going forward, including this product and other handmade Pad.
Since the wall is made at a steep angle right from the seat, the waist does not go too far forward even with hard brake, and the position at hang off is stable.
On the other hand, during the break-in touring, I felt Demerit because I was forced to lean forward and my stomach was pushed even though it was hard.
If you don't run Closed course, it may just be in the way.
The installation is Double-sided Tape, but you need to remove the FrontTank Cover and part of the Cowl.
Center matching is easy to match with the oil supply port, but Quantity:Pair (for Left and Right) As you can see in the picture, it was difficult to find the right angle.
There is no practical problem, though.
It also covers the rim of the fueling port, making it impossible to replace the port.
I'm very happy with the quality of the look.
View detail
High Holdability of Tank
Circuit, of course.
Winding and street riding.
Holdability during corner ring is increased.
I think the fact that it's not a full cover type is the dividing line between the pros and cons, but I think it's perfectly functional and I can recommend it to people who value cost.
I bought the FRP Type with Black Gel Coating surface finish.
The strength of the Body is also very strong.
It doesn't deform or flatten.
The molding and finish are beautiful.
View detail
Good product
The fitment is ok but could be better. The design is good. From highway riding, it offers support during braking. However I yet to try it in trackday. If I use stock seat, the seat will tilt upward and slightly hard to install because the tank cover will sit in between fuel tank and the stock seat. View detail
Tail fairing nsr50
I purchased this tail fairing for my US spec nsr50 and paired it with cbr1000 upper and lower fairing. Tail is good quality with only small imperfections that can be easily fixed with a bit of putty and sanding. The tail fairings included a very nice stick back seat pad, this was an unexpected surprise. It also came with aluminum mesh inserts installed on the vent holes from behind, they are also removable for painting of fairing. I am absolutely happy with the this great looking tail section! View detail
Installed on GSX-R125
It's a must have for race regulations I think they are the cheapest including other manufacturer's products, but they are well made Black Gel Coating is painted with Lacquer's Solid black I used the included M8 Bolt instead of the Rear stand hook View detail
Saitaniya ARAI RX-7 X Diffuser
Saitaniya ARAI RX-7 X Diffuser. Very good. Very nice. Installation is easy and packaging is safe and fast. The quality is very good. View detail
Great quality
Great quality product, shipped fast to the USA & perfect for a Doraemon replica hemlmet! - Fitment won't be spot on/perfectly flush but still looks great in our opinion. SEVENTY SEVEN DECALS LLC View detail
It is indeed made by a famous manufacturer
Installed on a 2019 YZF-R25
Installation was as simple as removing the OEM Chain Guard and fitting it in there
The texture is very good and the accuracy of the installation is also very good is coming out well, I bought the Black Gel one, so I'll paint it eventually! I think
View detail
Saitani-ya for peace of mind
Used in NSR50
I think the fit feeling is good and the accuracy is very good
The construction is also very solid, even if it is a light fall in Circuit, the Seat part is very strong is a place where the weight of the material will be put on, so the inexpensive Material:Plastic will crack if it's plastic, strong material:FRP is recommended
View detail
cb400sf single seat
Fantastic product. Quick delivery and a perfect fit. Just gotta get it painted and im nearly finished. Thank you very much webike :) View detail
It is quite good!
I purchased from the other Manufacturer 's Under Cowl that it was made for a long time.
If you remove Tire, it will be easier...
I installed it with lining clothes because it is a pain..
When the car bounces, it will inevitably interfere with the Accessory Case under Seat.
Because each one gets scratches, I cut off the bicycle Tube and stick it at the interfering position.
A little price is stretched but I think that it was good shopping.
View detail
It will be Race ish at once !!
Because we want to approach 400R as much as possible for installation Mounting Bolt and Rubber Damperetc. I used the 400 REM Product, but some Bolt was out of production, so I prepared a Bolt of the same length at Home center. First of all, in order to install RubberDamper protecting Mounting Bolt hole, I extended the hole to 14 pie.
With that and Single Seat installation, I thought that 400R Seat rail was necessary, I got a used item at Yahoo auction, but it was not necessary. Even if 400ROEMFRPSeat, SeatRear 's Pad can be attached and detached with Seat' s attached Key cylinder operation, and seems to be structured to be accessible to Accessory Case from there, but Saitaniya 's In case of Sponge padPaste Type, Seat removal is necessary to access Accessory Case.
From that point on, you can install it only by removing Tandem Footpeg, Tandem seat mounting hardware, Tandem seat desorption key Cylinder.
After that there was no particularly difficult place, installation on Smooth was completed !!
I also wrote it at the time of Impression of FRP Upper Cowl, Under Cowl, but Saitaniya would like to thank Mr. Saitaniya for the Lineup of the For StreetFRPParts of the vehicle that has been 17 years old since it was discontinued.
View detail
Racing cowl mounting accuracy of YZF R15 is good
Though I thought that holes were out of Cowl outside the company,
There was not such a thing at all.
Even just making Cowl of Minor YZF R15 still appreciate.
View detail
It can be installed in Swingarm of Gcraft
It is for NSR 50, but it can be installed with KIJIMA 's Plating Tie Wrap to N - Craft' s NSR Linkless Type Swingarm Monoshock Triple Square with Stabilizer 0 cm Long.
Be careful as it will interfere with Tire unless the mounting position is set to be more than the traveling direction Front.
View detail
Squid!
I attached it to the green of the ninja1000 2012 formula. It is terribly cool. In order to have unity with other carbon parts, we made it twill weave. Originally it was a green fender, it was not dissatisfied with itself, it could have been as it was, but with other people's blogs wearing carbon, I had the impression that the whole was tight. Actually attached and it was right. The rear inner fender and the side cover are already replaced with carbon. Rear inner fender is a striker, side cover is Atech, tank protector is K's style and disjointed manufacturer, but there is no discomfort. The front fender of this time was troubled to the last with things made of clever wolf. Because I wanted a thoroughly feeling, it was because it was nice to have clay bowls made by Clever Wolf and also by Mr. Tsuchiya. Finally it became the deciding factor because we aim at the under cowl after this, because there is no under cowl as parts from Clevelow Wolf, because there is in Tendanya, we feel a sense of unity from the front fender to the close part of the under cowl In order to have it, I made it made by Tendanya. However, I still do not know the difference between Mr. Tsuchiya made and Nojima ... as you can see it looks the same ... (Maybe the sales route is different ...)
I will try to sell Parts that I did for the time being as Oakon as much as possible. I entrust it to a trader. I get an answer that Front fender can be sold. I saw the bidding in the past and I made a bid for it with a reasonable price, so it became a trigger for purchase as well. Sometimes I used Point 10 times Campaign, I feel that I could buy it considerably cheaply when combined with Oak sale.
The delivery schedule was initially planned to be over a month, but it was about 25 days after all.
I left the installation to Shop, but it seems to be easy.
Recommendation for people who want to get around the Front, and want a little upscale!
View detail
Fits: HONDA CBR250RR (MC22), HONDA HORNET250, HONDA JADE
It protects Crankcase Cover
Because Crankcase Cover is bare, CBR 250 RR purchased it for appearance Dress-up to protect it from scratches.
Easy to install, Carbon looks better, cool and it will protect Crankcase Cover when falling down (I have not toppled yet so I do not know the durability) I think that it is a good product.
I am glad I bought it.
View detail
Saitani Tank Cover Type -2
OEM's Tank Cover has a thin end, so I exchanged for Tank Cover at Gendaiya. Cowl was made by another company, so interference etc etc. I was worried but I could install it without any problems. Hold feeling of Tank of the bottom also improved considerably, I am satisfied with Large. View detail