Reviews
Think in terms of replacement frequency, not Power
I don't think there is anyone who can perceive the increase in inhalation efficiency by 0.5ps at Peak with SEROW in the product description.
I'm more of a wash and reuse kind of guy, but it's a lot more work than I thought it would be.
According to the official procedure, wash with Cleaner→ wash with mild detergent→ dry for a day→ apply Oil→ wait 6 hours and when Oil settles, you can drive.
Almost two days if you follow it exactly? If I wash on Saturday morning, I won't make it in time for Touring on Sunday.
If you're the kind of person who changes filters once or twice a year, OEM replacement would be better.
I guess it's for people who want to go as fast as possible in an hour-long Race to change filters in a month, which is often run in Course.
View detail
Interference with clutch lever
[How is it used?
Daily use such as commuting
Was the one you received as per Image?
Not on Image Street.
Was the installation difficult?
Difficult.
How was your experience with it?
Grip slips.
[Included Parts:were they on?
Already included.
[Was there anything that disappointed you?
It was mentioned that the Small diameter was used to reduce interference with Lever,
Interference was found. close to the Switch box up to Limit,
I used a curved Clutch lever and it interfered with the Flange.
Flange diameter of this product:Φ57mm
OEM Product Flange Diameter:Φ44mm (measured with Caliper)
This will cause interference.
View detail
Fits: YAMAHA TT-R50E, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
Only looks
This price is not cosmetic just because it looks different….
Since we changed the OilfiFiller cap, we decided to do the other side as well.
View detail
please note
OEM Grip Heater Installation is not easy, the included bolt does not reach the handlebar weight, and even if the handlebar weight is removed, it cannot be installed with the Included Parts:. View detail
Neat around the Stem. I'm glad I bought it.
The Flasher is built into the x2Protector, and by removing the OEMBlinker, the Stem area is refreshed, making maintenance around the Stem area easier. View detail
Lightweight and good.
[How is it used?
When I replaced the Tail Lamp on my Vmax 1200 with Universal Product 'It would be better to make the License Plate Holder lighter and less shaky.' and ad vise, so I exchanged it.
Was the one you received as per Image?
It was lightweight (about 149g) and had a good texture.
How was your experience with it?
no problem 。 Titaniumium Flange Bolt Standard Brand:ZETA Item Number:D6594 I was thinking of purchasing this Bolt, but I didn't need it because the Bolt that came with the product was also of good quality.
[Points to note]
Spring washer is not included.
How did it compare to other products?
I am satisfied. I looked for something lightweight, so Material:License Plate Holder in Aluminum was excluded.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Product weight should be stated.
Installation instructions are in the photos only. I think it would be safer if precautions and other information were on the back of the PACKAGE.
The Black colored Washer was not included for 126cc and above. it seems to be different from the 50−125cc Washer.
View detail
Satisfied, except for the price.
The quality is good and satisfactory. If only the price could be kept a little lower. View detail
zeta bar rise kit
I love the fast delivery. I also praise the meticulous packaging. It's before installation, but I feel that the product is in very good condition. It's not comparable to the one made in Chi** View detail
Fits: HONDA CRF1000L, HONDA CRF1100L AFRICA TWIN, HONDA CRF1100L AFRICA TWIN ADV SPORTS ES, HONDA CRF1100L AFRICA TWIN ADV SPORTS ES DCT, HONDA CRF1100L AFRICA TWIN DCT, HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250R, HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRM250AR, HONDA CT125, HONDA TRAIL125, HONDA TRX450RX, KAWASAKI D-TRACKER X, KAWASAKI VERSYS1000, KAWASAKI VERSYS1000SE, KAWASAKI VERSYS650, SUZUKI V-STORM1000
I still feel safer with the Bolt stop.
OEM Cap." Than Screw bolt." looks better. It also provides some Prank protection. I also put a Plastic bolt cap on mine.
It goes on the 2023 CRF250RLY50MD47 with no problem.
View detail
Fits: HUSQVARNA TE511, HUSQVARNA FE501, HUSQVARNA TC250, HUSQVARNA FE350, HUSQVARNA FC250, HUSQVARNA TC125, HUSQVARNA FE250, HUSQVARNA FS450, HUSQVARNA FC450, HUSQVARNA WR125, HUSQVARNA TE125, HUSQVARNA TE250, HUSQVARNA FE250, BETA X-Trainer 250, BETA RR2T 250, HUSQVARNA FE501, HUSQVARNA FE350, KTM BREMBO 125-530 XC-W 06-17, HUSQVARNA TE300, KTM 450 Rally
Nice upgrade
They will fit. They fit in the factory perches as good as the factory levers, and do fit behind the factory handguards with plenty of clearance. They are a well made product. Best levers I've ever owned. Crashed multiple times in hard pack, and soft conditions. They haven't even deformed. Will purchase for every dirtbike I own moving forward. View detail
It looks like they are all made of Titanium Alloy Gold.
The HeatProtector side has a long hole for good alignment.
It is unfortunate that Band's Screw was Minus-headed.
Material can be SUS, and a hexagonal head or Plus head is recommended.
View detail
Change from M6Type
I had fixed SONICHand guard on my M6Type, but the bar end weight of Kawasaki car is only fixed to the inside of the bar by rubber, so it was stress that the hand guard gapped due to vibration when riding. I took the opportunity of replacing the OEM handlebar and purchased this one and installed the hand guard. I am satisfied that the hand guard is firmly fixed and does not shake when mounted. Two types of attachments are included to match the inside diameter of the bar. In addition, the HandCard can be fixed in or out of two positions.
It is very solidly built, but therefore quite pricey.
View detail
Grab Bar
Installed on crf250l
I used to put it on the Right Side only, but now I put it on the Left Side as well.
Quantity:Pair (for Left and Right) It can be installed regardless.
It can be used for hanging a load, pulling in the mountains, etc.
View detail
Universality is strict
If the car model is not sold with a dedicated kit, the installation adjustment is Large strange.
I installed it on SUPER SHERPA, but cut and Screwed and bent,
We finally arrived and are not satisfied.
If you do not mind a gap at the Handlebar End, you can put it on without modification.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Shift touch improvement
I replaced the Shift Pedal with a CRF250MD44RALLY50 MOTARD conversion, this Shift Pedal is also a Revolver that I have also owned machined.
Unlike in the past, Small students now wear GAERNE GAdventure boots, which are smaller in size compared to fastback boots, so we chose this basic version because the tip position does not need to be changed from OEM.
It is made of aluminum, so it may break when damaged, but it is a great feeling to be able to make a Shift touch.
View detail
Titaniumium Banjo Bolt Installation
[How is it used?
Installation of Brembo caliper
Was the one you received as per Image?
It has a sense of luxury.
Was the installation difficult?
it's simple
How was your experience with it?
There is a sense of quality
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: SUZUKI B-KING, SUZUKI GSF750, SUZUKI GSR400, SUZUKI GSR750, SUZUKI GSX-R1000, SUZUKI GSX-R1100, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX1400, SUZUKI GSX250S Katana, SUZUKI GSX400S Katana, SUZUKI GSF1200, SUZUKI GSF1200S, SUZUKI GSF750, SUZUKI GSR250, SUZUKI GSR250S, SUZUKI GSX-R400, SUZUKI RF400, SUZUKI SV1000, SUZUKI SV1000S
ZETA Good Value
ZETA provides good quality at a good price and this oil drain plug has excellent anodising that is better than some more expensive brands. The most important thing is the magnet on this ZETA plug is very strong, so it will do a good job at catching debris etc. Apply a little grease before install... View detail
Fits: HONDA CB500X, YAMAHA MT-09 To Racer, KAWASAKI ZX-25R, HONDA NC750X, HONDA NC700X, HONDA CRF250 RALLY, HONDA CRF1000L Africa Twin, HONDA 400X
I used it for Dress-up other than Screen.
What made you decide to buy?
I wanted to make it look a little more stylish!
[How is it used?
Dress-up of the Under Cowl installation section instead of the original Screen!
[How was the installation?
Simply remove the OEM Bolt and install! It is aluminum, so be careful not to drop it and scratch it.
[How was it when you used it?
The OEM bolt has a small head and the nylon washer is also small. So I bought Nylon Washer Set5Φ from KITACOConvenienceParts and installed it.
It is possible.
View detail
Changed from a fixed system to inner weight when handlebar was replaced.
The STD Handlebar uses a type that is fixed to the Inner Weight at both ends of the bar, but the Weight itself is only fixed by the Rubber, eliminating the Stress that causes the Guard to move due to vibration while riding. View detail
Fits 23-year 400X
I've been trying to find out and inquire if it will fit a 23 nc56 400X.
I could not confirm it, but I was able to install it.
It seems that the brake master is different from the previous generation SingleDisc brake models.
Installation was easy.
View detail