Reviews
Fits: HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M
You can open end with ease.
I bought it to attach a Closed type hand guard.
I was worried when I bought it because I read in other reviews that the total length was too short, but Large seemed to be sturdy.
When installed, the distance from the end of the handlebar to the end of the throttle tube is about 7mm inward. 120mm PROGRIP grips were installed, and they protrude a little from the throttle tube.
Although there is a gap from the edge of the handlebar, I thought it was a safe design with sufficient clearance considering that a hand guard is attached.
If Bar End is attached, gaps may be a concern.
View detail
Think in terms of replacement frequency, not Power
I don't think there is anyone who can perceive the increase in inhalation efficiency by 0.5ps at Peak with SEROW in the product description.
I'm more of a wash and reuse kind of guy, but it's a lot more work than I thought it would be.
According to the official procedure, wash with Cleaner→ wash with mild detergent→ dry for a day→ apply Oil→ wait 6 hours and when Oil settles, you can drive.
Almost two days if you follow it exactly? If I wash on Saturday morning, I won't make it in time for Touring on Sunday.
If you're the kind of person who changes filters once or twice a year, OEM replacement would be better.
I guess it's for people who want to go as fast as possible in an hour-long Race to change filters in a month, which is often run in Course.
View detail
Fits: HONDA CRF1000L, HONDA CRF1100L AFRICA TWIN, HONDA CRF1100L AFRICA TWIN ADV SPORTS ES, HONDA CRF1100L AFRICA TWIN ADV SPORTS ES DCT, HONDA CRF1100L AFRICA TWIN DCT, HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250R, HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRM250AR, HONDA CT125, HONDA TRAIL125, HONDA TRX450RX, KAWASAKI D-TRACKER X, KAWASAKI VERSYS1000, KAWASAKI VERSYS1000SE, KAWASAKI VERSYS650, SUZUKI V-STORM1000
I still feel safer with the Bolt stop.
OEM Cap." Than Screw bolt." looks better. It also provides some Prank protection. I also put a Plastic bolt cap on mine.
It goes on the 2023 CRF250RLY50MD47 with no problem.
View detail
Grab Bar
Installed on crf250l
I used to put it on the Right Side only, but now I put it on the Left Side as well.
Quantity:Pair (for Left and Right) It can be installed regardless.
It can be used for hanging a load, pulling in the mountains, etc.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Shift touch improvement
I replaced the Shift Pedal with a CRF250MD44RALLY50 MOTARD conversion, this Shift Pedal is also a Revolver that I have also owned machined.
Unlike in the past, Small students now wear GAERNE GAdventure boots, which are smaller in size compared to fastback boots, so we chose this basic version because the tip position does not need to be changed from OEM.
It is made of aluminum, so it may break when damaged, but it is a great feeling to be able to make a Shift touch.
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY
Good product
About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing "Very good product" View detail
Fits: HONDA CRF250L, HONDA CRF250M, KAWASAKI D Tracker, KAWASAKI KLX250, SUZUKI DR-Z400S, SUZUKI DR-Z400SM, Others
Sporty TRAILHandlebar
Mounted on SEROW225. I used to use a Narrow Handlebar to attack the woods, but it was difficult to control and the form did not look good. The SEROW225 has less of the SEROW's "TRIAL" feel, but it is still great for situations such as Black Cannon and Motocross courses where you are standing still and driving at relatively high speeds. The texture is good, and the color is also very appealing, so I would like to repeat this every time I bend it in the future. View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF300L
The thick Frame is useful!
Since it is a Small Shield, I wonder how effective the windshield is. However, in my opinion, the Level is better than no Level.
The advantage of the Large is that a Smartphone Holder, DriveRecorder, and Drink Holder can be attached to the thick and sturdy frame, making it possible to configure a cockpit on a motorcycle. Even with all of these things attached, there is no shaking at all.
It's really useful. 。 I'm glad I bought it 。 My Kok Pit is now complete.
View detail
Cool
This is Cool, although I honestly don't know how effective it is.
Red is good.Color:Red is unexpectedly suitable for Gray Motorcycle.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF300L
Hokkaido Tour
this summer
Hokkaido Touring Schedule
Little by little, we prepare for that.
Removed for forest road touring
with ScreenKakeTamaMaju I can't mock up comfortably.
Easily removed by PointUp??
View detail
Fits: HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF1000L, HONDA CRF1100L
Not that I'm complaining.
I have not tried riding without the rubber, but I think it is a good solution if you remove the rubber. Also, the quality of the product is good, and compared to Chromoly products, the Material:I think it's also good that Parenthesis is made of aluminum, and as a footpeg, it's quite wide, so I felt it's good that my feet don't get tired easily. View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Clutch lever replaced at the same time as the brake
Like the brake lever, the clutch lever was replaced with a ZETA PivotLever.
This is also my favorite Lever as I have used it on my KLX230R and have tipped it over many times, but the Lever has never broken, and it feels better to operate than the OEM.
After the lever is replaced, the clutch cannot be cut without adjusting the play of the wire, but this can be easily adjusted since it is a wire type.
I prefer 3Finger, but CRF250L has a light clutch lever, so even 3Finger lever can operate the clutch easily.
View detail
Fits: KAWASAKI KLX250, KAWASAKI KLX230SM, KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KDX125SR, KAWASAKI D-TRACKER X, KAWASAKI KLX300SM, KAWASAKI KLX300, KAWASAKI KLX230R, KAWASAKI KLX230R S, KAWASAKI KLX150S, KAWASAKI KLX230, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, YAMAHA XTZ125, YAMAHA WR155R, HONDA TRAIL125, HONDA CRF150L, HONDA CRF250M
Satisfied with high quality and functionality
I installed it on my CT125.
The OEM felt the need to replace it with Other Brand Product since the grip is not adjustable, and selected 3Finger from the stable ZETA.
Since I had already used it on another Motorcycle and was satisfied with the comfort of using it, I did not consider choosing from another Manufacturer.
The grip and feel of the controls are now much better, and I realized once again that you have to choose good quality parts for parts that are always in contact with each other.
View detail
Fits: KAWASAKI KLX250, KAWASAKI KLX230SM, KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KDX125SR, KAWASAKI D-TRACKER X, KAWASAKI KLX300SM, KAWASAKI KLX300, KAWASAKI KLX230R, KAWASAKI KLX230R S, KAWASAKI KLX150S, KAWASAKI KLX230, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, YAMAHA XTZ125, YAMAHA WR155R, HONDA TRAIL125, HONDA CRF150L, HONDA CRF250M
BrakeTouch is also improved
I have used it on my KLX230R and it does not break the lever even after repeated falls, and the touch of the brake lever is improved over the NORMAL, so I installed it on my CRF250L as soon as possible.
With the NORMALLever, when I apply the brake, it feels unreliable or squishy (which is natural since it is an off-road vehicle), but with this lever, I feel that the ease of levering and the construction of the lever improves the touch and makes it easier to control the brake. I think it may be because the lever is positioned closer to the car.
Installation is easy since all you have to do is remove the Bolt and replace it with a NORMALLever, but it would be easier to work with if you loosen the Mirror Holder and change its orientation.
When replacing them, it is better to grease them up properly before replacing them.
View detail
It's good.
The effect is... I honestly don't know.
Atmosphere. www.
View detail
Quantity:Pair (for Left and Right) You need to buy two to put it on.
I wondered whether I should attach a carrier, but I decided to start with a simple style and bought a ZETA Grab Bar.
Simply remove the OEM Bolt and install it between the supplied collars.
It is not likely to be used in Motorcycle Tandem, but it can be used for Net Hook when loaded with luggage, or as a Grip for raising and moving the car body.
The parts body is also finished with a smooth and pleasant feel and is easy to grip as a tandem grip.
It is easy to see from the description that I am a Quantity:Pair (for Left and Right) I thought it came in a box and when it arrived, there was only one in the box? I was so disappointed.
Grip to Quantity:Pair (for Left and Right) Two must be purchased for installation.
View detail
Fits: HONDA CRF300L, HONDA CRF300L RALLY, HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Car Type Exclusive Design
It was easy to install without any modification.
As per other impresarios.
If OEMGrip is used as is
Throttle Cable can be easily installed without removing it.
(I replaced it with an external one)
The Size of the Bar pad is a little short.
The options for replacement are
I thought it would be slightly less.
View detail
Fits: HONDA CRF300L RALLY, HONDA CRF300L, HONDA CRF250RALLY(S), HONDA CRF250RALLY, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250L, HONDA TRAIL125, HONDA CT125, HONDA MONKEY125, HONDA CROSS CUB110, HONDA CROSS CUB50, HONDA CRF110F
Well, it's only for appearance, but it's important to look good.
It's the look. Looks.
Motorcycle is a hobby, so it is a matter of how much you are satisfied with it. This item solves this problem, and it does not improve the performance at all.
If the OEM engine plug is too hard to remove, apply a Large thicker and harder Washer and turn it between the pliers.
As everyone says, it's expensive, so at least put an O-ring on it.
View detail
Fits: KAWASAKI KLX250, KAWASAKI KLX230SM, KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KDX125SR, KAWASAKI D-TRACKER X, KAWASAKI KLX300SM, KAWASAKI KLX300, KAWASAKI KLX230R, KAWASAKI KLX230R S, KAWASAKI KLX150S, KAWASAKI KLX230, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, YAMAHA XTZ125, YAMAHA WR155R, HONDA TRAIL125, HONDA CRF150L, HONDA CRF250M
Good product but shorter than I expected.
I like both the detailing and the look of the product.
But is 4Finger better for me?
It is about 2 or 5 Finger long when I hold it.
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Good product but shorter than I expected.
I like both the detailing and the look of the product.
But is 4Finger better for me?
It is about 2 or 5 Finger long when I hold it.
View detail