Reviews
Fits: HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF1000L, HONDA CRF1100L
Not that I'm complaining.
I have not tried riding without the rubber, but I think it is a good solution if you remove the rubber. Also, the quality of the product is good, and compared to Chromoly products, the Material:I think it's also good that Parenthesis is made of aluminum, and as a footpeg, it's quite wide, so I felt it's good that my feet don't get tired easily. View detail
Fits: HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF1000L, HONDA CRF1100L
The texture is perfect!
Installed on MD47.
For long touring, put a rubber on it to prevent vibration.
Remove and use on forest roads.
Can be changed according to the type of Sole of Poots.
I have been waiting for a product like this.
Good choice of colors!
View detail
Fits: HONDA CRF250M, HONDA CR125R, HONDA CR250R, HONDA CRF250RALLY, HONDA CRF250X, HONDA CRF450L, HONDA XL750 TRANSALP, HONDA CRF150R, HONDA CRF250R, HONDA CRF450R, HONDA CRF250RX, HONDA CRF450RX, HONDA CRF450X, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY
23CRF250L replaced with WidePeg
WidePegQuantity for OEMAccessories:I gave up and considered alternatives because Set was still an 8 month wait.
I decided to purchase ZETA because I trust the quality of ZETA.
Due to the press-fitted Pin, the Wide effect is reduced compared to the Image of the Body.
Since the OEM footpeg is also quite wide, the actual front-to-back length of the Pin and the OEM footpeg tread width are +10mm.
It is true that it is relatively wide, but it is hard to deny the impression that the Body is unnecessarily large and heavy.
The feel is not bad.
I think it is also possible to shave the AluminumBody as it is and process it into a mountain wave.
I am satisfied because the texture is wonderful, just like ZETA.
View detail
Fits: HONDA CRF250L, HONDA CRF250L S, HONDA CRF250RALLY, HONDA CRF250RALLY S
The dress-up effect was quite good.
I wondered whether I should buy it or not because the price is quite expensive even though it is not a part directly related to performance, but I bought it with the momentum of Bonus.
The replacement itself was easy, but since there were no replacement Split Pins, it was a bit large for reuse. Finally, I had to gently turn the Motorcycle on its side to do the work (laugh).
The result is more noticeable and more custom than expected, Parenthesis good!
Even though we are careful not to fall over, it was a good part to purchase in terms of being prepared for any eventuality.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Replaced at the same time as Brake pedal!
I had to replace the brake pedal with a ZETA pedal, so I replaced this one at the same time. View detail
Merit is Large size with your choice of Position.
I was not dissatisfied with the OEM, but I bought it because of the 4-position option.
Touch is also very good, and I think this Merit is Large because it is an important part for a 2-stroke vehicle like YZ125 that needs to be changed frequently.
The Bolt position is also better than the OEM position, which clamps from the bottom and is less likely to fall out.
View detail
Fits: HONDA CRF250L, HONDA CRF250L S, HONDA CRF250RALLY, HONDA CRF250RALLY S
It's so obvious!
The installation went smoothly and in a short time. View detail
Fits: YAMAHA SEROW225, YAMAHA TW200, YAMAHA TW225, HONDA CRM250R, HONDA CRM250AR, HONDA CRF250M, YAMAHA WR250R, HONDA XR250, HONDA CRF250L, HONDA CRF250L, HONDA CRF250LS, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250RALLYS, HONDA CRF300L, HONDA CRF300LRALLY, HONDA XL750TRANSALP, HONDA CRF1100LAFRICATWIN, HONDA CRF1100LAFRICATWIN DCT, HONDA CRF1100LAFRICATWINADVSPORTSES
It was a compatible car model, but it needed to be modified.
When I tried to remove and replace the NORMAL, the screw holes were 2mm out of alignment and could not be fixed.
I thought about returning it, but the position gap was too small, so I bought a Cutting Bit for electric drills, widened the hole, and installed it.
Parts is satisfied with the texture, weight and above all the appearance.
(Normal is faded with plastic parts...)
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
I guess I am concerned about the direction of Bolt fixation.
The OEM Shift Pedal bent after a fall, so I switched to the Foldable Pedal, which weighs less and is easier to install than the OEM Pedal. The only concern I have is that the bolt is the opposite of the OEM one, which is tightened from the bottom up, so I'm a little worried about loosening or falling off. It would be great if this point could be improved, but considering the price, I am satisfied. View detail
Fits: HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin, HONDA CRF1100L AFRICA TWIN ADV SPORTS
Shift change wearing off-road boots
Shift change in off-road boots was tough, so I replaced it with zeta's RevolverShift this time. However, I need 20mm more.
〜I wanted to raise it ~30mm, so I am going to order two different shorter length shafts from Dealer and try them out.
View detail
Fits: HONDA CR80R, HONDA CR85R, HONDA CRF250L, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L/S, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250RALLY/S, HONDA CRF300L, HONDA CRF300L RALLY
Reliable Brand
The installation was flawless, as I would expect from such an expensive product.
It looks great and Parenthesis is great!
It would be nice to be able to change the Change section somewhat and change it to my preferred position.
I bought it because I didn't care about the performance and wanted to have it with ZETA…lol
View detail
Zita Wide Footpeg
Good texture, much better than the Chinese ones sold on Amazon. View detail
Fits: HONDA CRF1100L AFRICA TWIN ADV SPORTS, YAMAHA YZ450F, HONDA CRF125F, HONDA CRF450R, HONDA CRF50F, HONDA CRF50F, HONDA CRF70F, HONDA CRF70F, HONDA CRM250AR, HONDA CRM250R, HONDA CRM50, HONDA CRM80, HUSQVARNA FC450, HUSQVARNA FE250, HUSQVARNA FE250-501 , KAWASAKI SUPER SHERPA, KTM 250SX-F, KTM 250XC-F, KTM 350EXC-F, KTM 350XCF-W
If the tip is aluminum, it will be reduced,
I have been using this Material for a long time, but it is surprisingly reduced.:I replaced it with Stainless Steel. There are two different lengths, so I put the longer one on. The durability will be seen from now on. View detail
Used for CRF150r2
It is good to be able to change the position as desired. View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA GB350, HONDA DAX125
footpeg
The installation instruction manual was easy to understand and installation was quick and easy.
I went for a test drive on a nearby mountain road, and as you can see, the GizaGiza bit into the soles of my shoes and didn't slip, so it was easy to stand on them.
View detail
Used in CRF150r2
I bought this pedal because I thought it would be a little better than the full size Motocrosser, because the Change Pedal is a little closer to the CRF150r2. I will change it to LongTip for Replacement and will get it. View detail
Fits: KTM 125SX, KTM 125EXC, KTM 150SX, KTM 150XC, KTM 200EXC, KTM 200SX, KTM 200MXC, KTM 200XC, KTM 200XC-W, KTM 250SX, KTM 250EXC, KTM 250EXC TPI, KTM 250XC TPI, KTM 250XC-W, KTM 250SX-F, KTM 250XC-F, KTM 250EXC-F, KTM 250XCF-W, KTM 250EXC-F, KTM 300XC
I couldn't Shift change with OEM.
OEMPedal was not adjustable and was difficult to shift change, so it was replaced.
The change is subtle, but quite comfortable.
View detail
Fits: HONDA CR80R, HONDA CR85R, HONDA CRF250L, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L/S, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250RALLY/S, HONDA CRF300L, HONDA CRF300L RALLY
Finding the right position
Purchased with the aim of improving operability in OffBoots.
I changed the position little by little while test driving. It didn't feel right, and I was about to give up when I changed the position for the last time, and after a test run, it felt so right that I was surprised!
I'm glad I bought it.
View detail
Shift Pedal
It is luxurious and somewhat adjustable.
There is a risk of cracking Crankcase.
View detail
Fits: YAMAHA SEROW250, YAMAHA XG250 TRICKER, YAMAHA XT250X
Easy to use
Good front and rear adjustment.
Good texture. Non-slip.
But it is expensive.
View detail