Reviews
preventive parts
Prevents damage by rotating the Lever holder in the event of a fall.
Even if you change the lever, you can't release the up and down force, so it's a necessity for Race and forest roads!
View detail
It is difficult to replace
This time, I replaced it to match the Front fork overhaul
In order to replace it, the front fork is in the way of removing the RPin and loosening the bolt If you don't remove the Front fork, it will be impossible to replace it
I also had to bend the OEM Bracket on the underside slightly to get the replacement work out
It could be as Accent
View detail
Sorry a little
There was a big bubble in the Sponge part. I'm sorry. I think that it is obviously a defective product. I installed it so that bubbles can not be seen. The feeling is good.. Examination etc. I thought that I would like you to be more polite. View detail
Purchased for FAT-Bar
Purchase later purchase hand guard's installation size since it was Size for Normal handle.
It is very nice that the Parts necessary for this Parts can be purchased partly.
Even when it gets broken, you only need to purchase Parts and it will be available for a long time.
View detail
"I purchased in consideration of front fork pushing out. Left-side clamp is STD and right-side in the photograph is a lower clamp (55mm). I hoped the up equivalent to overhang in the riding position, I think it is good. Since position change is also abund
"I purchased in consideration of front fork pushing out. Left-side clamp is STD and right-side in the photograph is a lower clamp (55mm). I hoped the up equivalent to overhang in the riding position, I think it is good. Since position change is also abundant if you don't like, if you try many, the position suitable for yourself would surely be found. It is a recommend." View detail
With formation of a handle taper, I had you let it use only a clamp part, and it wound. Although it was unavoidable at use by another manufacturer's hand guard, as arm length was too different, when there was also the middle model, by MID and LONG, I
With formation of a handle taper, I had you let it use only a clamp part, and it wound.
Although it was unavoidable at use by another manufacturer's hand guard, as arm length was too different, when there was also the middle model, by MID and LONG, I thought that it was convenient.
View detail
It purchases to D tiger X. In the case of the D tiger X, with the standard size of hand guard attachment, a right-hand side brake master cylinder and a left-hand side brake hose extraction part will interfere, respectively. Then, if this LONG is u
It purchases to D tiger X.
In the case of the D tiger X, with the standard size of hand guard attachment, a right-hand side brake master cylinder and a left-hand side brake hose extraction part will interfere, respectively.
Then, if this LONG is used, it can miss.
Attachment turns into fairly impossible attachment by the touch which drives away a hand guard quite ahead.
View detail
Fits: HONDA CRF450X, HONDA CRF450L, HONDA CRF450RX, HONDA CRF450R, HONDA CRF250R, HONDA CR250R, HONDA CR125R
If it falls, the direction of a handle may sometimes bend to a tire, but if the cause is a twist of a handle clamp, you have to carry out and correct a tool. If this product is attached, and that twist can be prevented and it will be released from cor
If it falls, the direction of a handle may sometimes bend to a tire, but if the cause is a twist of a handle clamp, you have to carry out and correct a tool.
If this product is attached, and that twist can be prevented and it will be released from correction was thought, and it purchased.
The effect will be expected from now on.
View detail
[Buying motive] - book products are the goods of arranging a nylon sleeve to a clamp inner side, and reducing fixation for a positive handle, and the risk of lever breakage in order for a brake lever holder to rotate at the time of a sudden fall and to mi
[Buying motive] - book products are the goods of arranging a nylon sleeve to a clamp inner side, and reducing fixation for a positive handle, and the risk of lever breakage in order for a brake lever holder to rotate at the time of a sudden fall and to miss a shock,
Since it had written to the package Some vehicles can be used also for the clutch side, the clutch side brake lever clamps and the mirror clamp of KLX250 (07) were exchanged.
[Attachment] - mirror clamp only exchanged only clamps using the pure bolt.
- Since this product of a brake lever clamp was thick in a pure plus screw (M5x14) and it was not able to attach, separately, the two same bolts (M5x20) as a mirror clamp were purchased, and have been attached.
[Others] Although the ZETA:JITA rotating bar clump (with a mirror hall) sells - mirror clamp at another article,
Since the height of a mirror on either side stopped having suited even if a mirror hall did not suit M8 of the kawasaki vehicle and used M10 ->M8 adapters, since ten [ M ], it was taken as means with this product. [ this ]
(Probably, (08) users may use this product, since the mirror hall from (08) is incidentally M10 also KLX250) It is [grading of goods], and what is ordinarily good.
It is a three stars.
View detail
[Buying motive] Although it is the goods of arranging a nylon sleeve to a clamp inner side, and reducing fixation for a positive handle, and the risk of lever breakage in order for a brake lever holder to rotate at the time of a sudden fall and to miss a
[Buying motive] Although it is the goods of arranging a nylon sleeve to a clamp inner side, and reducing fixation for a positive handle, and the risk of lever breakage in order for a brake lever holder to rotate at the time of a sudden fall and to miss a shock, - book product,
Since I have attached the armor handguard of ZETA to KLX250 (07), there are no worries about breakage of a lever.
Moreover, since a mirror is removed through an off-road course, there are no worries about breakage.
This product was purchased for prevention of the mirror breakage by fall on the path through a wood it runs attaching a mirror uniquely.
[Attachment] It only exchanges for a - authentic positive brake holder clamp.
[Others] Since it had written to - package Some vehicles can be used also for the clutch side, it checked, but although the brake lever clamp and the mirror clamp of the clutch side were different bodies, it turned out that both can use this product.
However, since the clamp circumferences, such as a diameter of a screw of a mirror (M8->M10), have been changed about 08, since it is the check by KLX250 (07), it can say that KLX250 (-07) and D tiger (-07) are OK, but is it unreasonableness?
[grading of goods] - it is ordinarily good.
It is a three stars.
View detail
Even if it does not replace by force, this product and = effect show up in a long bolt and color. The fault of this product has the sweet part fixation which a degree of freedom tends to attach greatly, and is merely easy to shift. If it is being
Even if it does not replace by force, this product and = effect show up in a long bolt and color.
The fault of this product has the sweet part fixation which a degree of freedom tends to attach greatly, and is merely easy to shift.
If it is being able to do, and the replacement parts of top bridge fixation are put on the market, I am glad, but since metal fittings are put on the market from green sum, it is a check required.
View detail
It was too long although purchased to adjustment of the hand guard of the other company. There is sufficient die length to cut and also cut a screw thread. Compared with other manufacturers, it is merely square, and large.
It was too long although purchased to adjustment of the hand guard of the other company.
There is sufficient die length to cut and also cut a screw thread.
Compared with other manufacturers, it is merely square, and large.
View detail