Reviews
Fits: HONDA CRF250L, HONDA CRF250M, KAWASAKI D Tracker, KAWASAKI KLX250, SUZUKI DR-Z400S, SUZUKI DR-Z400SM, Others
Sporty TRAILHandlebar
Mounted on SEROW225. I used to use a Narrow Handlebar to attack the woods, but it was difficult to control and the form did not look good. The SEROW225 has less of the SEROW's "TRIAL" feel, but it is still great for situations such as Black Cannon and Motocross courses where you are standing still and driving at relatively high speeds. The texture is good, and the color is also very appealing, so I would like to repeat this every time I bend it in the future. View detail
Fits: KAWASAKI D-TRACKER, KAWASAKI KLX250, Others , YAMAHA WR250R, YAMAHA WR250X
There are some good things that only a comp bar can do.
I put a MOTARDMedium comp bar on my CRF250RLY50.
I had worn cx bar mx-123Blue before, but I thought it would be more comfortable with a little more aperture in terms of position. I decided that the comp bar would fit CRF250RLY50, which is not so strong and rigid, and bought it.
As a result Large was the right answer
The position, moderate rigidity of the handlebar, and coloring are perfect.
View detail
Stability only possible with Fat bar
This is a Review at least 6 months after purchase.
Quantity:Pair (for Left and Right) Fell multiple times on Tarmac in (SlipDown type) were, but there are no visible signs of breakage or bending, and the feel of the product remains the same.
The length of the bar is 800mm, which may be a little too large for some Japanese, perhaps due in part to the length adapted to the physique of Westerners. I use it with the bar packed.
Motocross athletes often use them without filling them these days, so if you take that into account, you can use them without any particular concerns.
View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI KLX125, KAWASAKI KLX150S, Others
Used for DT50.
I'm 184cm tall and the OEMHandlebar was making me feel like Curve was repricing, so I changed it.
Operability has been improved.
View detail
Fits: HONDA CRF250R, HONDA CRF450R, KAWASAKI KX250F, KAWASAKI KX450F, KAWASAKI KLX450R, KAWASAKI KX125, KAWASAKI KX250, HONDA CR250, HONDA CR125
Anodized is beautiful.
MX-123 was installed on a CRF250.
OEMSeat is modified with 3cm up high seat and 14mm up spacer to get the best position.
View detail
Fits: HONDA CRF300L, HONDA CRF300L RALLY, HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Car Type Exclusive Design
It was easy to install without any modification.
As per other impresarios.
If OEMGrip is used as is
Throttle Cable can be easily installed without removing it.
(I replaced it with an external one)
The Size of the Bar pad is a little short.
The options for replacement are
I thought it would be slightly less.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, KAWASAKI KLX250, KAWASAKI D Tracker
Rigidity and beautiful colors
I own a MOTARDMedium with the same molding for both Cx and comp. Small students prefer the cx bar, which is a little stiffer with less individual variation in shape. View detail
Fits: HONDA XR230, HONDA XR230MOTARD, HONDA XR250, HONDA XR250Baja, HONDA XR250Motard, YAMAHA SEROW225, Others
Speaking of affordable aluminum handlebars...
[How is it used?
I was looking for an affordable external handlebar for my Serow225WE OEM handlebar, which I received from a friend, because the rust and distortion were too large.
Was the one you received as per Image?
Handlebar for TheOff-road motorcycle. The appearance of the product is not particularly distinctive, but it is solidly built and gives a sense of security.
There are three color variations (Blue, Red, and Titanium), so please enjoy coordinating your favorite colors with your motorcycle's body color.
Was the installation difficult?
As with the handlebars for off-road motorcycles made by other manufacturers, this is a Universal Product, so the Quantity:Pair (for Left and Right) When attaching the switch part of the "M", it is necessary to drill a hole with an electric drilletc. to match the convexity of the inside of the switch. (There is also a method of shaving off the convexity of the switch side, but I do not like this method.)
How was your experience with it?
I use it on my SEROW and it is not too high and not too low for me, and while it maintains rigidity, it also has the right amount of flexibility, so when I land on the ground after a jump or when I am suddenly pushed up on a steep slope, the impact on my wrists is somewhat offset.
[Included Parts:were they on?
HandlebarBody with Black Brace bar installed.
[Was there anything that disappointed you?
I have never been disappointed because I have checked the handlebars used on my friends' motorcycles before purchasing them.
0Other items that may be useful include
Point and hang of installation
There is no difficult task, but the Quantity:Pair (for Left and Right) The switch, mirror, and peripheral parts such as each leverretc. of the handlebar must be removed and reinstalled after the handlebar is replaced, which may seem troublesome.
In addition, the drilling of holes for the installation of both switches, the angle and quantity of the handlebar:Pair (for Left and Right) I think it is better to work on it slowly when you have time because of the positioning of Lever and other factors.
[Availability and clarity of the Instruction Manual
There is no Instruction Manual, and the Handlebar arrives in its original packaging.
[Notes]
Nothing special, just put the removed handlebar back on as it was attached and it will be Large sturdy.
Learn the Wiring arrangement well in advance before working on it.
[ITEMS TO BUY TOGETHER
Cushioning pad to be attached to the Brace bar should be purchased together with the Brace bar. "Rasiness" There are a variety of products on the market, including those made by other companies, so you can buy what you like.
If you take this opportunity to replace the grips with something you like, I think you will love it even more.
[Opinions and requests to Manufacturer
If possible, we would like to see more color variations, such as Green Light and Gold, so that there are more choices and they are more attractive.
View detail
Lightness can be experienced!
Absolutely lightweight compared to NORMAL. After installation, you will feel more lightness around the handlebar. The effect can be felt both when pushing and walking. I was worried about the vibration, but the Large is sturdy even without BalanceWeight. View detail
Fits: KAWASAKI D-TRACKER, KAWASAKI KLX250, YAMAHA WR250R, YAMAHA WR250X, Others
Anyway, it's light.
I chose MOTARDMedium, which has almost the same shape as the OEMSteel handle of the crf250rally50
It has a slightly shallow aperture and is my personal favorite Handlebar.
Aluminum Handlebar is really light and changes handling drastically!
View detail
I should have replaced it sooner.
I didn't realize that a difference of only a few centimeters from the OEMHandlebar would make positioning so much easier.
The holes for the Switch box were also open, and since I had prepared the Grip and Throttle cone in advance, the replacement process was completed in a matter of minutes. I wish I had replaced it earlier.
View detail
Fits: HONDA CRF150R, YAMAHA YZ85, HONDA CR85
Replacement from NORMAL
I am new to On road only,
I am satisfied with the Large position and appearance, although the Top Bridge was also replaced at the same time. I think it was good for me, who has short arms, to have a comfortable posture. I can't say for sure because there are differences in body shape among individuals, but I am glad I bought it.
View detail
Texture is great!
Installed on my daughter's SEROW with no problems with switches or wiring. She uses it for her commuting and the position seems to be good. The quality of the product is very good. View detail
Fits: HONDA CRF125F, YAMAHA TTR125E, YAMAHA TTR125LE
Change to Position for Large person
I wanted to increase the handlebar height a little more and I heard that OEMs bend easily and it has a bar pad, so I replaced it. View detail
ZETA Handlebar
Compared to the genuine handlebar, the driving position is slightly wider, so it feels comfortable. The height does not change much, so if you want more high position, it's better to install a spacer as well. I also recommend it to those who like the color of matte black. View detail
Good Value!
Great looking handle bars they mount up easy.I used this on my monkey to stop hitting my knees into the bar ends when turning tightly while seated. Used in conjunction with the 10mm riser. The finish is cool but the throttle tube turns a little less smoothly now. Now let me just say something here. I went down pretty hard tore up the hole left side of my bike and bent them up pretty good. It was my first ride with them and I had to of hit pretty hard because I've spent the last 1 hours trying to bend them back into place and I can't even get them to budge. I've used a torch, a hammer, a 1 meter cheater bar with a vice, a sledge hammer, and I've even tried to run them over with my truck. These things won't bend back into place I definitely suggest getting them best price for the best quality. I am buying another set along with grips. I think these are my new favorite set of bars now.If you are considering buying this product do it they are great! View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA YZ250X, YAMAHA YZ450F, YAMAHA YZ450FX
It is a little weak.
The price, texture, and position are perfect, but I think it is a little fragile for Race.
Lack of skill in tipping over is the most common cause, but tipping over will almost certainly result in bending.
I have the impression that Large is weaker than OEM.
The balance between stiffness and bending may be difficult, but I don't think it is suitable for racing if it distorts so much that its position changes after a single fall.
It is a little unreliable for HED, but not for MX, On-time, or XC.
View detail
Fits: HONDA CRF125F, YAMAHA TTR125E, YAMAHA TTR125LE
A little higher up.
I installed it on my CRF125F, I heard that the OEMHandlebar bends easily and the Position is too tight.
I chose ZETA because it is a little more expensive and the Aluminum Handlebar is well made.
Standing has also become easier and easier to drive.
View detail
Fits: KAWASAKI D-TRACKER, KAWASAKI KLX250, Others , YAMAHA WR250R, YAMAHA WR250X
I put it on my old KLX250.
There is no difference between OEM and Large in terms of shape, but I feel that the weight is lighter during various operations. I am not a good driver, so I wanted to install ArmourGuard in case I fell down, so I had to replace it. View detail
More rigid in their construction due to the addition of the cross brace
About quality and texture, I can confirm that the quality is great and that the material used is aluminum tubing with a black anodized finish. About the feeling of use, These handle bars are much more rigid in their construction due to the addition of the cross brace resulting in a more enjoyable riding experience, I find the positioning of these handle bars just as comfortable as the original Honda handle bars. Products to buy together, I chose to add a quick throttle tube and softer hand grips to my cart as I found this to be the perfect opportunity to also upgrade those parts. Difficulty of installation, I can say the fitment of the handle bars for my installation was average due to the high number of parts that required removal to allow for the new handle bars to be installed which ended up taking sometime to complete. Cost performance and comparison with other products, Pricing of this product is great. You receive strong handle bars that are different in their appearance with the addition of the cross brace which if your purchase separately would be half the cost of the part. Other handle bars specific for the Monkey are price similar. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff always got back to me with any concerns I had over the entire process. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail