Reviews
Fits: SUZUKI GRASS TRACKER, SUZUKI VOLTY, KAWASAKI 250TR, Others
Satisfied
I purchased this product to relocate the Blinker when converting to Separate Handlebars. I am satisfied with the quality and feel. View detail
Mast for Exhaust System replacement
Center stand stopper is required when replacing OEM Exhaust System with external Exhaust System.
OEMCenterSTANDStopper is attached to the Exhaust System. The OEMCenterSTANDStopper is attached to the Exhaust System body, but not to the Exhaust System outside the company.
The Center Stand is a part that can be used without hitting the Exhaust System or Frame, or not being able to stand the car body up using the Center Stand.
Quantities of the Center stand stopper frame mounting bracket and rubber, which are lost when the OEM exhaust system is replaced.:FI Vehicles are also acceptable.
good point
Easy to install.
The rubberized stopper absorbs the shock well.
The use of the Center Stand makes it easy to perform chain lubrication, oil replacement, and other operations.
The shape is beautiful compared to other companies' products.
There is no Demerit, so I will not write about the bad points.
It would be a shame to damage the CoolExhaust System, and the Center Stand is really useful when it is available, so I think this is a must.
View detail
Satisfied
Good design. A little expensive. Installation is quite Large. View detail
Short aluminum fender
Fits and works perfectly on my Genuine G400C; otherwise known as the Shineray XY400-2, with roots to Honda's CB400SS from the early to mid 00s. View detail
High quality
Purchased for reverse mounting a swCondor Handle on a w650.
I was prepared for this, but it reduces the angle of sharpness immensely.
UTurn is harder to do and considerably less maneuverable.
It was only de Tune, so I removed it as fast as I could and gave up on the reverse attachment.
But the product was polished and very beautiful. You can't see it once it's installed, but w
It was a good experience.
View detail
Wow that's cool
Installation is very easy, but it is a bit narrow and may require some tools.
It's not a noticeable part, but it's necessary for suspension replacement, and I think it makes the Sprocket look larger and cooler.
View detail
Modern outlook on every retro bike
Fitting on: SR400 Much lighter then original fender, it provides a gorgeous modern outlook on every retro bike. Easy to clean and polish View detail
A stylish look
Fitting on: SR400 Very light weight and firm construction compare to the OE one, give your bike more stylish look. Aluminum requests polishing in a few months but easy to clean. View detail
Fits: YAMAHA sulfur oxide (SO, SO2, etc.), YAMAHA SR400, YAMAHA SR500
Texture is good!
SR400 (1JR) I installed it on a Magura Separate handleSpec. car in the
I kept it off the vehicle for a while, but during this time I heard that Handlebar Lock is now being checked at vehicle inspections in my area, so I installed it along with the company's Handlebar Lock for the purpose of vehicle inspection and to prevent theft when the vehicle is stopped.
We felt that the quality was on the high side, even though it was inexpensive for an Other Brand Product Handlebar Stopper.
For installation, the company's Handlebar Lock and Quantity:It took about an hour to install with Set.
View detail
Build Well. Bolt On!
SR400 (1JR) I installed it on a Magura Separate handleSpec. car in the
I have been storing the car off inspection for a while, but during this time I heard that Handlebar Lock is now being Checked in my area for inspection and to prevent theft when the car is parked.
The price is not cheap, but I felt that the quality of the product is commensurate with the price.
The Handlebar Stopper was also selected and installed by the same company.
Handlebar Lock and then Handlebar Quantity:Pair (for Left and Right) If the handlebar stopper has a larger ball, it may be possible to use a handlebar stopper with a larger ball.
As for the installation, I won't go into details because I don't want to disturb other Users for security reasons, but it took about an hour with a lot of thought.
Although the number of Handlebar Lock keys has increased in addition to the Main key, it is a recommendation for those who are having trouble with Handlebar Lock after making Separate handle.
(After all, it's Bolt On with no modification required. If you try it and feel different, it's easy to change it back).
I didn't feel that it was cosmetically good, but considering the fact that it has a pretty good texture and that it is a Yamaha Key, etc., etc. Fair price I think so (Considering the quality of the product, I think it is not expensive.)
View detail
nicely
I couldn't find anything that fit at KIJIMA, so I decided to go with Boots here, even though they are expensive. I started wearing Boots on my previous Motorcycle, so I decided to do the same this time. I don't know how durable they are. View detail
The handle lock which had been given up in using a separate handle became possible in combination with the top bridge of the company. It was impressed considerably!! It is recommended!!
The handle lock which had been given up in using a separate handle became possible in combination with the top bridge of the company.
It was impressed considerably!! It is recommended!!
View detail
Quality WM Wellington
Convenient to install with Bolt On to the three-prong.
No complaints about the quality. It is also good that the Left Side Handlebar Lock can be used with the company's (WM) Top Bridge.
However, since the Optical Axis Adjustment Bracket is also co-tightened at the same location, the optical axis should be readjusted.
Also, if you are using a Blinker Bracketetc. to be installed at the same location, it may be better to use a Handlebar Stopper to be installed on the Frame side for better fit.
View detail
Good for dress-up
It is now much better than the OEMUnder Guard. The anti-vibration packing etc. is also a quintessential WM product. Anyway, the Parenthesis has improved a lot. View detail
You don't need a Separate handle to look good, Cowl.
This is a definite Cowl.
This is Aluminum Cowl from the long-established WM.
Since the angle can be used for other than Separate handle, it is recommended to use Quantity for Handlebar selection.:Pair (for Left and Right) It will not be done.
It's also windproof, and the design is superb.
I am a Color:Unpainted and attached as aluminum.
good point
The design suits not only the Separate handle but also the Pipe Handlebar.
The texture and design of aluminum is excellent.
It fits perfectly even with normal meter.
It is also highly aerodynamic.
A bad point
High price.
But I think the price is not too high for such a high quality.
I think the Cowl will be very unique with its performance, eye-catching design, and texture.
If you modify the Bracket, you can use it for other types of cars, and it will be an interesting custom.
There are also Classic series other than SR out there.
View detail
MiddleShort fender
Smaller than OEM and cool! View detail
no problem
I don't like power lever, so I always use this Type, no problem at all. View detail
Since I changed my style to a cafe racer, what I need!
Since I changed my style to a cafe racer, what I need! I like WM, so I bought WM parts. But I don't know what kind of mistake I made... I bought two... It's uncomfortable because the angle of the handle is too narrow. The handle of the cafe racer is short. It's dangerous if the handle is big. I have to install these parts. If you want a cafe racer, make sure to buy it! View detail
Fits: その他 , KAWASAKI ESTRELLA , KAWASAKI W400, KAWASAKI W650
Common practice.
This is a Custom that was also done by SR.
The idea was to change the light case to NORMAL and only change the bracket to increase the classic look.
The cleanliness of the Aluminum Buffing makes me choose Wellington.
You just need to convert from Normal light stay.
good point
Aluminum buffing is clean and easy to clean.
●It will be Style as aimed.
A bad point
It is easy to break because it is aluminum.
The exchange is quite Large strange.
This kind of parts are useful for customization to enhance the atmosphere of the original style.
And the quality of the parts is very high!
View detail
Beautiful practical item.
I don't want to dress up my car, but I don't want to get dirty under the engine by mud splash and small stones when I'm touring. I was looking for a Guard that is durable and cool.
Wellington is known for the cleanliness of their parts.
good point
■Material:Since it is made of Stainless, it has high strength and durability.
It's a beauty that also has the appearance of dress-up parts.
Less mud splashing on the engine and car body.
Because Touring goes through various roads, it gets dirty and scratched here and there without noticing.
It's a good idea to be prepared so that you won't be disappointed in any way.
It's good because it looks beautiful.
View detail