Reviews
brembofor Rear Caliper
The back plate is considerably thicker than other companies' or bremboOEM. This is probably to obtain high rigidity.
The thickness of the friction material is about 3.5mm, and the life is naturally shorter.
As for the potency, there are no problems with both touch and efficacy. 。
I think many people are having a hard time choosing a pad for bremboCNCCrab.
Recommended for the METAL Pad group, although a bit expensive.
View detail
Fits: YAMAHA Serow 250, YAMAHA FZN250, YAMAHA FZF250, YAMAHA DT200WR, YAMAHA DT125RE, SUZUKI TS200R, SUZUKI TS125R, SUZUKI RMX250, SUZUKI RM250, SUZUKI RM125, SUZUKI DR650SE, SUZUKI DR350SE, SUZUKI DR350SE, SUZUKI DR350S, SUZUKI DR350, SUZUKI DR250SHE, SUZUKI DR250SH, SUZUKI DR250SE, SUZUKI DR250S, SUZUKI DR250E
Touch is also gentle and works well.
[How is it used?
During BrakeMaintenance on SEROW250 I might try non-DAYTONA Brake Pads once in a while." I bought Vesla's Sintered pad on a whim.
When the pad was replaced, the brake caliper was cleaned and each part was greased up, the brake fluid was replaced, and the pad was used after maintenance was performed in an amateur's way.
Was the one you received as per Image?
I was used to seeing Large Residential DAYTONA and Vesla at the motorcycle supply store Brake Corner, but I always bought the reasonably priced DAYTONA pad.
See Webike's revue. "It'll last. I bought it this time because several people had written about it.
How was your experience with it?
The vehicle equipped with SEROW250 is "Street ride" 30%, "Playing in the mountains." 50%, "Touring" There are very few runs where hard breaking is used for long periods of time, such as 20% of the time.
It is not a type of brake that works with a powerful force from the beginning of gripping! This is not a type that works with a "thump" from the beginning, but a type that starts up braking in proportion to the force with which the lever is held, a characteristic that makes it easy to control.
I don't know if I can recommend Brake's Fee Ring to everyone, as everyone has their own preferences, but it was a great fit for me.
In other reviewers' revue. And it holds up well." I have no need to ask for more in my motorcycle life, and it is a product with sufficient performance.
[Points to note]
Since this is an important component that slows down the vehicle, please be very careful not to get grease or Oiletc. oil on the contact surfaces of the pad and disc rotors during installation.
Naturally, the replacement work must be precise.
How did it compare to other products?
It may not be as good as a very expensive product, but it is a solid product that is nothing compared to other products in the same price range.
Other items that would be helpful
Point and hang of installation
If you are replacing only the pad, there seems to be no problem if you work with the above mentioned points in mind.
However, if the brake pads have been used until it is time to replace them, it would be safer to remove brake dust from the caliper, clean the brake pistons, and replace the brake fluid, and consider doing the work in total.
BrakeTrouble can be life-threatening and large, so if you are not sure about the work, do not overdo it! "PRO" Ask the person in charge of the project.
[ITEMS TO BUY TOGETHER
As mentioned above, if you are working with Brake-related Total, you should purchase Brake fluid, PartsCleaner, and various types of Grease to make your work go smoothly.
[Opinions and requests to Manufacturer
Please continue to provide a wide variety of lineups.
View detail
Fits: HONDA CJ250T2, HONDA CJ250T, HONDA CB750F1, HONDA CB750F, HONDA CB750A, HONDA CB550Four, HONDA CB750, HONDA CB550F, HONDA CB500T, HONDA CB500K2, HONDA CB500K1, HONDA CB500F, HONDA CB500, HONDA CB450K7, HONDA CB450K6, HONDA CB450K5, HONDA CB400F, HONDA CB400 Four, HONDA CB360, HONDA CB360
malformation
I had bought Besra because it didn't squeak Brake.
The exchange would normally have taken 30 minutes to complete.
The Pad I purchased this time holds the Brake lever.
Glitch that does not return at all.
Initially, I inspected the vehicle body side Braque hydraulic failure and installation defects many times.
Not at all. I asked my go-to Shop and no luck.
It took me 3 hours to give up and put a pad with 200km on it.
Successfully installed and BreakingOK.
The Piston grounding surface of the Pad on the B side of this purchase was in poor shape.
It was a problem with the Pad not returning.
Get a store that specializes in OH.
"Drove 200km, Pad attached to front." is made by Besra.
What's this?
I did the maintenance myself and the Brake squeal went away.
I'm assuming you just happened to hit a defective product in a production lot.
Vesla's credibility has suffered.
Caliper is hurt and angry.
View detail
Fits: KAWASAKI KH250, KAWASAKI KH400, KAWASAKI KH500, KAWASAKI KZ1000 Police, KAWASAKI KZ1000 Police, KAWASAKI KZ1000 ST, KAWASAKI KZ1000, KAWASAKI KZ1000, KAWASAKI KZ1000, KAWASAKI KZ1000 MK II, KAWASAKI KZ250, KAWASAKI KZ400, KAWASAKI KZ440, KAWASAKI KZ550, KAWASAKI KZ650, KAWASAKI KZ650, KAWASAKI KZ650, KAWASAKI KZ650, KAWASAKI KZ750, KAWASAKI KZ750
It was damaged after less than 2000 km!
I replaced it and it has not even driven 2000km, but when I looked at the pad today, there was a Crack on the side and when I removed it, about 1/3 of it came off….
I have been riding Motorcycle for over 40 years and have had many pad replacements but have never seen this kind of damage.
This did not happen with DAYTONA's Red Pad, which was used on the same motorcycle, so it is clearly a defective product.
I have used Vesra in the past and trust them, but I am a little disappointed.
View detail
Fits: SUZUKI VZR1800Z Boulevard M109RZ SE, SUZUKI VZR1800Z Boulevard M109R Limited Edition, SUZUKI VZR1800Z Boulevard M109R Limited Edition, SUZUKI VZR1800BZ M109R B.O.S.S, SUZUKI VZR1800N Boulevard M109R2, SUZUKI VZR1800B Boulevard M109R B.O.S.S., SUZUKI VZR1800 Boulevard M109R, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom 1000 XT, SUZUKI V-Strom 1000 Adventure, SUZUKI V-Strom 1000 Adventure, SUZUKI V-Strom 1000 Adventure, SUZUKI GSX1300RZ Hayabusa Ltd, SUZUKI GSX1300R Hayabusa, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000
It works well and is very straightforward and Linear.
DL1000 V-STROM1000ABS 2014 replaced at the same time as Rear.
The effect is good. It is very straightforward and linear, which is exactly what I think the seniors on the Net have said.
The OEM Front image has a gradual start and a sharp peak in the middle, but this image is able to decelerate as intended even if the breaking is early or late. I decided on the Large Image, but the shop recommended the Vesla Image, and I thought Large was the right choice.
Fuji the day after installation, and there was no discomfort at all, as if I had been using it for a long time. Breaking is a safe bet.
I don't know about durability, but I'll give it a 5 because of the good Net rating.
I would definitely recommend it to my friends if they ask. (Rear is also replaced at the same time, so VD-359JL has the same Rear impression written on it.)
View detail
Fits: SUZUKI V-Strom1000 ABS, SUZUKI V-Strom 1000 XT, SUZUKI GSX1300RZ Hayabusa Ltd, SUZUKI GSX1300RZ Hayabusa Ltd ABS, SUZUKI GSX1300RA Hayabusa ABS, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300BKA B-King ABS, SUZUKI GSX1300BK B-King, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000
Breaking is assured with Linear listening level.
DL1000 V-STROM1000ABS 2014 replaced at the same time as Front.
The effect is good. It is very straightforward and linear, which is exactly what I think the seniors on the Net have said.
I personally appreciate the OEM's Rear, which I felt was not as effective as I would have liked it to be, but in situations such as attitude control during cornering, it does what is intended.
The Shop recommended Besra, and I thought Large was the right choice.
Fuji the day after installation, and there was no discomfort at all, as if I had been using it for a long time. Breaking is a safe bet.
I don't know about durability, but I'll give it a 5 because of the good Net rating.
I would definitely recommend it to my friends if they ask.
View detail
Fits: YAMAHA YZF-R15, YAMAHA Tricity 125, YAMAHA Tricity 125 ABS, YAMAHA Sniper150, YAMAHA M-Slaz, YAMAHA JUPITER MX KING, YAMAHA EXCITER 150, YAMAHA JUPITER MX, HONDA Z125MA Monkey ABS, HONDA Z125M Monkey, HONDA XL125V Varadero, HONDA XL125V Varadero, HONDA CBR125RW, HONDA CBR150R, HONDA CBR125RS, HONDA CBR125R, YAMAHA Tricity155, YAMAHA Tricity155
Rear brake of exciter
It was used on the Rear brake of the exciter.
I thought it would be difficult to find compatible Brake Pads for a vehicle with so few balls.
Since the car was registered as a compatible model, we had no hesitation in purchasing it.
I use it for commuting and it works well enough and is easy to Control.
View detail
Fits: TRIUMPH Legend TT, TRIUMPH Bonneville T214, TRIUMPH Bonneville T120 Black, TRIUMPH Bonneville T120, TRIUMPH Bonneville T100, TRIUMPH Bonneville T100, TRIUMPH Bonneville T100, TRIUMPH Bonneville T100, TRIUMPH Bonneville Street Cup, TRIUMPH Bonneville Sprit, TRIUMPH Bonneville SE, TRIUMPH Bonneville SE, TRIUMPH Bonneville Newchurch, TRIUMPH Bonneville Bobber, TRIUMPH Bonneville Black, TRIUMPH Bonneville America, TRIUMPH Bonneville 800, TRIUMPH Bonneville, TRIUMPH Bonneville, TRIUMPH Bonneville
Used for CBR250RR MC22
[How is it used?
I recently installed it on a CBR250RRMC22 Front.
No actual driving has been done.
How was your experience with it?
Installation was fine. I can't say for sure since I haven't done any actual driving, but I didn't think there was anything wrong with the equipment.
I'm hoping to see how long it will last.
How did it compare to other products?
The price is inexpensive.
[Points to note]
Please check the compatibility of Front and Rear.
View detail
Fits: SUZUKI SV650XA ABS, SUZUKI SV650A, SUZUKI GSX250S Cobra, KAWASAKI ZZ-R400, KAWASAKI ZXR400R, KAWASAKI ZXR400, KAWASAKI Ninja ZX-7R, KAWASAKI Ninja ZX-7, KAWASAKI Ninja ZX-11, KAWASAKI GPZ900R, KAWASAKI GPZ900R
Subtle Touchable
The way the Sintered Metal works is in line with my taste, so I can switch it off and on the road.
Touch is Psycho.
View detail
Fits: HONDA CMX/REBEL250(ABS), YAMAHA XV1700, YAMAHA XV1700, YAMAHA MT-01, YAMAHA MT-01, YAMAHA MT-01, YAMAHA MT-01, VICTORY Vision Tour, VICTORY Vegas, VICTORY Vegas Ness Signature, VICTORY Vegas Jackpot, VICTORY Vegas 8-Ball, VICTORY Vegas 8 Ball, VICTORY Ness Cross Country, VICTORY Magnum, VICTORY Kingpin, VICTORY Kingpin 8 Ball, VICTORY Judge, VICTORY Jackpot, VICTORY HighBall
I have no complaints about its effectiveness.
I am a lightweight myself, and I feel that I don't need anything more than this Pad when it comes to effectiveness.
Control is not bad, and when installed on a 41 hp model with a different F suspension setting, I have no complaints about the control just before ABS is activated (when installed on a 38 hp model, I was only dissatisfied with the control in this area).
However, as is the fate of a good pad, it does decrease in a certain amount.
When I used it, I exchanged it within 4000?each time (image).
View detail
Fits: YAMAHA Zeal (i.e. a Zealot), YAMAHA XVZ1300TFS Venture MM Limited Edition, YAMAHA XVZ1300TFS Royal Star Venture S, YAMAHA XVZ1300TFS Royal Star Midnight Venture, YAMAHA XVZ1300TFM Royal Star Midnight Venture, YAMAHA XVZ1300TF Venture Star, YAMAHA XVZ1300TF Royal Star Venture, YAMAHA XVZ1300CTS Royal Star Tour Deluxe S, YAMAHA XVZ1300CTM Royal Star Tour Deluxe, YAMAHA XVZ1300CT Royal Star Tour Deluxe, YAMAHA XVS950XR-A BOLT, YAMAHA XVS950CUD-A BOLT, YAMAHA XVS950CUD-A BOLT, YAMAHA XVS950CUD-A BOLT, YAMAHA XVS950CU-A BOLT, YAMAHA XVS950CU-A BOLT, YAMAHA XVS950CU BOLT-R(A) SPEC ABS, YAMAHA XVS950CU BOLT-R SPEC, YAMAHA XVS950CU BOLT-C(A) SPEC ABS, YAMAHA XVS950CU BOLT-C SPEC
Great durability.
I have no complaints at all about the efficacy.
I wondered what I had been using RedPad for all this time.
It has a terrific high longevity, as much as I can say.
I personally choose this one for my SR.
Almost every day because it was also a commuter issue.
I used it for more than 20 km.
After about 2 years of use, I installed it myself and also
I was worried because it didn't decrease too much, so I went to the Shop.
I had it replaced, but there was 4-5mm left.
Moreover, the Baxter was changed and the Brake Arm remained the same.
The Rear brake was almost 100% used as a decoration.
This is despite the fact that it was a Front brake request.
I'd rather just replace it with RedPad for a little bit.
It is better to use this one even if it is a little expensive.
It is by far the most cost-effective.
Crying is none for me.
View detail
Fits: KAWASAKI Ninja 300, KAWASAKI Ninja 250R, KAWASAKI Ninja 250, HONDA NSR50, HONDA NSR50, HONDA NSF100
Sufficient braking power.
It works for Linear.
Control is also good.
View detail
Fits: HONDA WAVE125i, HONDA WAVE100i, HONDA Sonic, HONDA MSX125 GROM 125, HONDA Innova, HONDA Innova, HONDA CBR150R, HONDA CBR125RW, HONDA CBR125RW, HONDA CBR125RT, HONDA CBR125RS, HONDA CBR125R, HONDA CBR125R, HONDA CBR125M, HONDA CBF160 Hornet, HONDA APE 50 Type D, HONDA Z125M Monkey, HONDA Z125MA Monkey ABS
I love the Control performance.
I replaced NisshinOEM with this pad in conjunction with DAX's Brake Disc replacement.
It is difficult to evaluate the PadSingle Body because it was replaced at the same time as the Brake Disc.
Anyway, the controllability of full brake from high speed has been improved.
It's very easy to ride
Until now, it seems like the effect suddenly becomes stronger when Speed drops to some extent.
I had to loosen the lever a bit at the end or something.
The Besra feels the same amount of grip to stop with the same effect.
I used Vesla all the time when I was on my CB400SB.
Brake Fee Ring was my favorite, but it is still a good Pad.
View detail
Fits: KAWASAKI Z750FX, KAWASAKI Z550, KAWASAKI Z400FX, KAWASAKI Z1R, KAWASAKI Z1R, KAWASAKI Z1000MKII, KAWASAKI Z1000, KAWASAKI KZ1300, KAWASAKI KZ1000 MK II, KAWASAKI KZ1300, KAWASAKI KZ1000, KAWASAKI KZ1000, KAWASAKI KZ1000 Police, KAWASAKI KZ1000 ST
Mounted on Kawasaki KZ1000 MK-II
I used it on the rear brake of my Kawasaki KZ1000 MK2.
More effective than OEM. JAPAN products are safe. Costa is the best!
View detail
Fits: KAWASAKI KH250, KAWASAKI KH400, KAWASAKI KH500, KAWASAKI KZ1000 Police, KAWASAKI KZ1000 Police, KAWASAKI KZ1000 ST, KAWASAKI KZ1000, KAWASAKI KZ1000, KAWASAKI KZ1000, KAWASAKI KZ1000 MK II, KAWASAKI KZ250, KAWASAKI KZ400, KAWASAKI KZ440, KAWASAKI KZ550, KAWASAKI KZ650, KAWASAKI KZ650, KAWASAKI KZ650, KAWASAKI KZ650, KAWASAKI KZ750, KAWASAKI KZ750
Mounted on Kawasaki KZ1000 MK-II
Used on front brake of KZ1000 MKII.
Works much better than OEMPad. It works better than I expected!
View detail
Comparison with VD
This is a change from VD in Vesla.
Not because I am dissatisfied with the VD, but because it has been over 10,000 km since I replaced it and I just felt like changing it. Sometimes it happens.
What I like about Vesla is that if you grip it properly, it works as hard as you grip it, so you can ride with peace of mind.
With ZC, when I loosen the lever, I feel the brake heal as much as I loosen it, and that is the large difference between ZC and VD. Of course, I don't feel any lack of braking power, in fact, it may even increase.
There is a Repeat.
View detail
Fits: BMW F650 GS, Others 600 Super Motard, BETA Jonathan 125, BMW C1, BMW C1 200, BMW F650 CS, YAMAHA TT600RE, YAMAHA BWs125, APRILIA SL750 Shiver GT ABS, YAMAHA WR125X Supermoto, BMW F650, Others VR250 Super,Otard, Others VR250 Enduro, Others Supermotard 610, Others TK, Others SR ZF13.0 J.Juan Calipers, Others S 570E Super Motard, Others S 501 Super Motard, Others SR 600 Motard Racing, Others SR 450 Motard Racing
It works fine
Rear Brake Pads for BWS125 were replaced.
It was very well worn and after the replacement it was very good.
The brake fluid had not been replaced after delivery, so the front and rear were replaced as well.
View detail
Fits: YAMAHA YZF-R15, YAMAHA Tricity 125, YAMAHA Tricity 125 ABS, YAMAHA Sniper150, YAMAHA M-Slaz, YAMAHA JUPITER MX KING, YAMAHA JUPITER MX, YAMAHA EXCITER 150, HONDA Z125MA Monkey ABS, HONDA Z125M Monkey, HONDA XL125V Varadero, HONDA XL125V Varadero, HONDA CBR150R, YAMAHA Tricity155, YAMAHA Tricity155
YZF-R15 (MODEL in 2012) Used for
[How is it used?
YZF-R15 (MODEL in 2012) for Rear.
When I looked at Brake Pads, there was none left, so I hurriedly ordered some from Webike.
It was an order item that was not in stock, but it arrived in about 5 days.
Was the one you received as per Image?
It has been several years since I purchased this Pad, and I was a bit surprised to see that the Package has changed.
There doesn't seem to be any change in the product itself. (Lol)
Was the installation difficult?
In the case of YZF-R15, it is necessary to remove the rear tire, but I think it can be replaced in about 30 minutes.
No special tools or work is required.
How was your experience with it?
I have used it before and have no complaints about how well Brake works itself.
The BALI of the Pad itself is also good, with almost no BALI from the beginning.
However, I personally feel that Brake dust is produced quite a bit, and the Wheel cleaning is quite Large strange.
[Included Parts:were they on?
There are no specific Included Parts:other than Pad.
A separate pad greaseetc. must be prepared.
[Was there anything that disappointed you?
I am a little concerned about only Brake dust compared to other products.
Also, not regarding this product, but the vehicle that was replaced had a previous Owner who had SBS 777-0225000 (https://www.webike.net/sd/22799199/) was attached.
I regret a little that I should have chosen that one because it is cheaper and I have had no problems with the ride so far, although it is not in the fit.
【Review】
I have no problems with Brake's braking power and quality.
Personally, I am concerned about Brake dust and think it is a little less cosmetic than SBS.
View detail
Fits: HONDA CN250SE FUSION/HELIX SE, YAMAHA Zuma 125, YAMAHA X-MAX, YAMAHA X-MAX Sport Edition, YAMAHA X-MAX Business ABS, YAMAHA X-MAX ABS, YAMAHA X-MAX 400, YAMAHA X-MAX 400 ABS, YAMAHA X-MAX 250 / ABS, YAMAHA Majesty S, YAMAHA Cygnus X, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA BWs125 R, YAMAHA BWs125, YAMAHA BWs 125
Good Controllability and disc-friendly
Motorcycle is YAMAHA's MT-01.
It has only been installed for a short time, so I can't speak to its durability, but it is a replacement for the DaytonaRed Pad.
Since it is a Rfor Brake to begin with, I was not looking for absolute braking power, but only if I could feel good controllability. Also, I had a memory that when I used Vesla's pad for pad replacement several decades ago, the disc rotors that had been ground into grooves became smooth and smooth, so I had high expectations for the low aggressiveness to the disc (since I have now replaced it with Wave Disc, which is thinner than OEM).
There is of course nothing wrong with the replacement itself. The ZV-SD156/3 product we used this time is 1mm thicker on the One Side than MT-01OEM, and may be too thick to be used with NORMAL thickness Rdiscs, and even if it is, it may be a limit. If you use NORMALRdiscs, it is better to select the product according to the compatibility table (ZV-SD156/2).
The base color of the pad is matte black, which is not too flashy for my taste.
When the car is actually driven and the hit is made, it is difficult to feel a large difference if it is said that the braking force exceeds that of DAYTONARed or OEM, but the braking force seems to be sufficient for the needs.
Control is good and perfect. I thought so.
After running for a while, I still feel that the surface of the Disc Rotor is getting smoother to the touch, and it seems that the gentleness to the DISC is still there.
View detail
Fits: HONDA XR440R, HONDA XR440R, HONDA XR400SM Motard, HONDA XR400RT Acier, GASGAS MC250, GASGAS MC125, GASGAS FSE450, GASGAS EC515, GASGAS EC450, GASGAS EC300, GASGAS EC300, GASGAS EC300, GASGAS EC250, GASGAS EC200, GASGAS EC125, GASGAS EC125, GASGAS 450 Fse, BETA SM450, BETA SM400, BETA RS450
Does it feel like the back of the OEMPad works twice as well?
[How is it used?
I have used the vehicle for 3 years and 10,000 km since purchase, and thought that the pad installed at the time of purchase must be worn out by now, so I replaced it.
It was rumored to work well in certain places, so I decided to go with this Pad, although it is a bit expensive! 。
How was your experience with it?
The initial Touch is what? The initial Touch is so gradual that you may think, "What is that? It is not suitable for those who are looking for an effect that starts up quickly in the early stage.
However, as you tighten your grip on it, it starts to work.
I used to Brake with two fingers on my previous Pad, but now I can do my normal deceleration with a slightly stronger grip, even with just one index finger.
However, it requires Stroke to work (because it is OEMHose?). So, it takes more grip strength than expected.
How did it compare to other products?
The pad installed at the time of purchase was presumably HYPERSintered by DAYTONA.
The braking force was satisfactory enough, but the effectiveness has been further improved compared to that.
Durability will be verified in the future.
[Points to note]
When replacing the pad, it is better to clean the caliper and grease up the slide pins.
The wear and tear of the Rotor must also be checked.
View detail