Reviews
Fits: SUZUKI DL 650 V-STROM, SUZUKI GSX 600 F, SUZUKI GSX-R 750 W, SUZUKI RGV 250, SUZUKI SV 650, SUZUKI SV 650 ABS, SUZUKI SV 650 S, SUZUKI SV 650 S ABS
V-PARTS Standard Lever 175mm CNC Black W / Aluminum Bolt Adapter (Pair) Suzuki
The brake levers are a good quality and fit very well, aliigning correctly into the master cylinder, and have a smooth action. View detail
lightened! but ….
I bought it to do something about the heavy Clutch on my WR250X.
The OEM has a large amount of play in the top and bottom of the lever, and the grease is easily sharp and creaks after a little while even after greasing up.
After replacing the clutch with this one, there is no extra lever play and the clutch itself is dramatically lighter at the lightest ratio position. It can be pulled even with a single finger.
The clutch switch on the OEM clutch perch could have been removed in its entirety and short-circuited, but I pulled it out of the perch and secured it with Tie Wrap in an unobstructed position, in case I wanted to return it to OEM. (Note that this method allows the Cell to turn even if you are not holding N, but the Cell will turn even if you are not holding the Clutch lever. Also note that the Switch itself, which has been removed and fixed in place, may malfunction.) 。
I considered Hydraulic Clutch, but for this Gold price, I think it is the best cost-effectiveness with good quality of parts.
The following is a regrettable part,
Quantity:It would be better to have a short lever in Replacement as it is a bit too long to operate with 2pc fingers.
The adjuster part is the same as the OEM one, but the adjuster part is not only the same as the OEM one but also has no knurl, so it is slippery and difficult to turn.
I also felt that it was a little difficult to adjust the play while driving, since the angle at which the Wire is pulled is fixed by the tightening of the Nut, so it requires quite a delicate adjustment.
Also, in the case of my wr250x, if the ratio is at the lightest position, it may not be able to pull the clutch enough, or if the clutch play increases while driving, the GEAR will be a little slow to enter. So as a result, I use the second lightest position.
Adjustments are necessary depending on the car model.
View detail
One choice is ScottFace guard.
This is the first ReturnRider in 40 years. Back in the day, ARAI MX-2, Goggles&Face masks were common, but what a time to choose one. It is an expensive scheme because few people use it. The functionality has increased with all plastic and durability compared to those of 40 years ago. The variety is bearable, but I would like to have at least a choice of colors. But it's the only one I'm glad to have. I think the Mobage one is a little difficult to use for Motorcycle. View detail
Fits: KTM 690 Enduro R, KTM 690 SMC R
Silencer
Since EURO5Spec., the position and spec. of Silencer and Front pipe connection has been changed, so only this type is available for the current model. 。 The silencer is longer than the previous ones and the silencer is separated from the body. 。 Personally, I liked the previous Type better because it fits nicely inside the Rear cowl, but I can't help it. The sound is quiet with the DB killer still on. 。 Of course, I removed it immediately, but it is still quieter than the old model. If you want to install the old type silencer, you can use the external front pipe or if you are OEM, I have heard that the OEM front pipe of US Specification is still in the same position as the old one. View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type
the expendables
The rips were not improved by replacing the lip seals, and I finally replaced them because I was afraid of damaging the body as the wear had progressed considerably. The operation noise became quieter, but the problem of the rotation not slowing down improved or did not improve, so I think I need to work on the tuning a little more. View detail
My sense of security has increased.
I have been using the older model and the feel is the same,
It is a reliable Tohnichi Torque wrench, and since it is new, it has increased the security of tightening at the specified value.
View detail
usually
The thickness of the Rubber is just right to protect the Tube from Spoke.
They are inexpensive and are replaced together with the Tire every time it is replaced.
View detail
Diversion information.
I had installed SW-motech's (COBRA) hand guard on my KTM790Adventure, but the hand guard cover cracks easily even when the vehicle is tipped over almost standing up at low speed. I decided to take a countermeasure against this problem, so I installed a ZETA hand guardCover.
The reason why I chose this was because it was less than half the price of SW-motech's hand guard, and it is one of the standard hand guards for off-road motorcycles, but the most important reason was that Webig had stopped handling Repair Parts.
The actual installation is a simple task, as all that is required is to drill a hole in the aluminum bar portion of the SW-motech hand guard and cut an M6×1.0 screw thread, but the installation position is in the Quantity:Pair (for Left and Right) The setup before the work is a pain in the ass.
I am satisfied with the Large change because it seems to fit surprisingly well when installed, and now I can use various types of ZETA hand guard covers.
Now I just hope it won't break easily even if it falls down a little.
In addition, since the aluminum bar part is to be drilled and its strength will naturally be reduced, those who do the same thing should do so at their own risk.
View detail
Purchased for pasting Graphic in Race
The OEM exterior is kept for when the vehicle is sold and an external exterior is used.
It is a little thinner than OEM, but I have been riding it every week for more than a year for practice in Race and it is very cost effective.
It went on easily without any gap in the hole position.
(It was common for external exteriors from a long time ago to have holes that did not match.)
It is a very good product because it is Reasonable and can replace the entire exterior.
View detail
Parenthesis good. The price is ….
Looks nice Parenthesis of course.
Since the OEM is a fish grill, the replacement effect is excellent, along with the Oil cooler below.
However, I wonder if it is expensive for a product punched out of a thin Stainless steel plate.
View detail
Soft and easy to wear
Used on a Mesh leather jacket. The one that came with the jacket from the beginning was too tight and useless, so I replaced it immediately. It fits my body better and is more comfortable to wear. View detail
Resin parts of overseas products deteriorate over time...
We have already confirmed the Fit feeling by trying it on beforehand. We chose this color because it is a little too flashy for city driving and for visibility from other vehicles. I had used Alpinestars' blobs in the past, but I have the impression that resin parts of overseas products generally deteriorate over time, so I purchased this product, which has fewer resin parts. View detail
สินค้าตัวนี้มีของพร้อมส่งเลยไหมครับ ต้องการใช้ด่วน View detail
Ikazuchi Tube! I love the name.
Sticker placement is left up to the User. View detail
POSH Aluminum Pillion Belt Cover
About quality and texture Well made aluminum from POSH. The cover gives a beautiful outlook compared to the stock sliver look. About the feeling of use It's a cover that fit perfectly without any lapse in space. Difficulty of installation Less than 15 mins to remove the original screw and place the cover on with the given screws. I hand tighten the the screws as hard as possible. Cost performance and comparison with other products There's no comparison with others as there isn't any similar product around. The price is not expensive but it gives an additional look in your plain looking seat. About shipping and packaging Shipping is not expensive as the the items are small. Items are place in a vinyl plastic bag but no visible damage after shipping. Any concerns, cautions, or advice when purchasing The given screws length is long enough as there's worries about the safety of the belt if the pillon is to grab it. Make sure it's well tightened and theses should not be a problem. View detail
Daytona usb 18w.Good
Type C usb.Bult qulity good.water proof.cable lenth inought for from head cowul to handle bar mount.good thing is out put port dust seal is replacibale.Main power supply cable along with mini barral fuse.Out pout usb c port is very tiny and simple mount with cable tie Unfotunatly my unit dosent work some time in idel rpm,I'm suspecting volatge detecting(even viltage above 12,4v )Any way im satisfied. Charging is good can be charge phone battery quickly. View detail
ARCHI Radiator side rod
About quality and texture High quality aluminum material finishing. I bought the gold rods version, it look like it doesn't then to fade overtime, but time will tell I guess About the feeling of use Feels heavier the the stock covers but the looks brings out the retro looks at the side of the bike. Difficulty of installation It tools only 30 mins or less. Just have to wonder where is the top or where is the bottom as the there is no instruction given. But it take only a while to figure it out. No issues. Cost performance and comparison with other products The quality is at the top range by Archi. Only product available currently as the other brand with the same design is out of stock. The rest of the other design covers maybe cheaper by the outlook is not there. About shipping and packaging Shipping is not costly. Item is placeed with vinyl bag. I hope there's more protection for the product as the black plates have some scratches at the edge. But after installing it's not visible. Any concerns, cautions, or advice when purchasing The weight of the product is heavier then the stock cover. But only worry is the weight may cause pulling on the radiator bracket. But if it's by Archi I guess it's already consider it and made precaution to it. Initially I thought that my additional radiatior cap will restrict it. But no worries to it. As it fits perfectly as shown on my picture. View detail
Fits: Others iPhone 14 Pro, Others iPhone 14 Pro Max
GILD camera lens protector for iPhone 14 Pro Max
About quality and texture Great aluminum quality always from the company. About the feeling of use Actually there's different color to choose from like silver or black. But only black was sent to me without option. About Design The design is great and protective. Not like those cheap lens protectors you can buy on the market Cost performance and comparison with other products Not a cheap product for a lens protector but the quality built and it's purpose is well justified. This is my second time buying this product as I didn't fitted well the first time. The adhesive didn't stick well after I removed it to stick again. So please read the instructions carefully on how to fit it. About shipping and packaging Well packaged in a small box. Least likely to get scratched during delivery. Shipping is cheap as item is very small. Any concerns, cautions, or advice when purchasin View detail
YOSHIMURA - Key Chain -Black
Size of key holder is small.it can be eazy ro kepet in pocket. The leather part is black which i orded , YOSIMUSRA logo emboss & stamp on it The leater strip fold and stick with glue which is not harder and eazyly came out.(i put personaly leather glue & it will perfecty solid after ) This is a good Key Holder for YOSHIMURA lovers. View detail
Fits: KAWASAKI Ninja250, KAWASAKI Z250, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZM50R, YAMAHA TZ50, TRIUMPH TIGER1050, SUZUKI BURGMAN400, SUZUKI BURGMAN400, SUZUKI BURGMAN200, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI DR800S, KAWASAKI ELIMINATOR 125, KAWASAKI Z400, KAWASAKI Z400, KAWASAKI Z250SL
Used for city driving
It is used for city driving.
Controllable and good feeling. It is less scary even on rainy days. The price is not too expensive and I like it.
I will report again on durability.
View detail