Reviews
Fits: HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA CB1300 SUPER FOUR (SUPER FOUR), HONDA FIRE BLADE (Fire blade), HONDA CB1300 SUPER FOUR (SUPER FOUR), HONDA CRM250AR, HONDA CB1300 SUPER FOUR (SUPER FOUR), HONDA CRM250AR, HONDA CB1300 SUPER FOUR (SUPER FOUR), HONDA CB1300 SUPER FOUR (SUPER FOUR), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade)
It's not very useful.
I used it on a CRM250AR and the oil seal is too gubby and the Dust Seal is too tight to fit. It is a waste of money to buy something so cheap. View detail
It was an instant scare.
Purchased on 1/24/2024 3/1/2024 only a little over a month later the fire stopped flying… It's the worst. View detail
Fits: KAWASAKI ZEPHYR400χ, KAWASAKI ZEPHYR400
A sound that evokes the good old Showa period.
The MAJOR Short Tube is an old car-style custom exhaust system with a Showa-era sound, appearance, and appeal that is still very popular today.
With the popularity of the East Ribeye and other models, there are more and more opportunities to see vehicles with Short Tubes on motorcycles ridden by the younger generation.
What is Short Tube? ‥
Basically, it comes from the old Racer.
In other words, when cars were regulated without silencers, racing parts were used in production cars or were given a look-alike appearance because the performance would be improved if a set was added.
Performance and characteristics
The sound is Large and the low-speed Torque is weakened. The sound is Large and the low-speed Torque is weakened.
The lower exhaust pressure makes the start of the system feel slower.
Torque is obtained by utilizing the exhaust pressure of the engine. 。 If there is no exhaust resistance at all, the Engine will turn lightly 。 → On the other hand, there is no resistance (no snagging) → the low-speed Torque is eliminated because the exhaust Gas flows as it is.
Exceptions are...
Short Tube, such as MORIWAKI and YOSHIMURA = JMCA Certified Exhaust System, looks like a Short Tube, but its internal structure is completely different, and it has a device to suppress demerit while producing merit. 。 Torque is lost to the extent that such things are installed.
Short Tube Intake Setting (Torque shortage cover method)
● Fueling to compensate for the lower Torque.
→ low speed range Raise the Pilot or Slow Jet number. The fusion point of squeezing out Power by turning to high RPM and at the same time applying Torque at low RPM to go around the Corner is the so-called Setting." It is a thing called 。 Short Tube not managed by Torque." The reason why the motorcycle that was made to be a "3.0" is revved to a very high rpm at start or acceleration is because "it would not go forward otherwise".
It is because it is "Motorcycle without Motorcycle".
In a youthful indiscretion, I put this on my ZEPHYR because I wanted something inexpensive, cool looking, and with an austere sound (laugh) &arrarr; Now I regret it (laugh).
good point
◎ Inexpensive. At the time, this was Mast (laughs).
◎ Sound. To describe it in words, bobbing → blowing with Idling is a fawn (lol) The sound when the Engine is turned is pleasant.
◎Installation accuracy is not bad for the price. Easy installation.
◎The appearance is good.
◎ Not only ZEPHYR, but also many air-cooled 4-cylinder lineups.
A bad point
The sound is too loud to pass inspection. 。
Center Stand cannot be used due to the mounting position.
▲AfterFireYa started to go out at low and mid speeds, to the point where the Engine was jerky and un-runnable as if it was Knocking. Carburetor setting to compensate for the low-speed part eliminated the problem.
Rust-prone.
The welding of the ▲Bracket section is unreliable.
Baffle removal is rather tight and difficult to remove.
In other words, putting a Short Tube in the modern era is the old Racer style! 。 According to the theory of exhaust system construction, a short exhaust system tends to lack low-speed torque because it is unable to accumulate sufficient exhaust pressure.
Many of them will not even be muffled properly. 。 There are many different Muffler makers, so it is hard to generalize, Short tubes are a type of tube assembly that are characterized by their wilde sound, which helps to create a badass look. Many of them have too much openness, so they tend to lack low-speed torque. Can we say?
But I digress...
Q:Why doesn't a pure Racer, with no sound restrictions, have a Super Short Tube? Or not remove the Exhaust System?
A:It only increases rotation when exhaust pressure is removed, The power to kick the ground. Because there will be no more 。
The appearance and sound of many Demerits are appealing, and if you are thinking about purchasing one, please take into account that the act of customization = self-responsibility.
I think it is a decent product for the price.
View detail
Cowl drilling required
I ride a CBR600RR (2009).
I purchased this product because I was told it was compatible, but I could not install it without drilling out the cowl.
Fortunately, I did not have to drill holes by diverting the Slider Bracket that I had originally used, but of course I had to choose and purchase the Bolt myself since I could not use Included Parts:.
If you purchase the product, you should be prepared to drill holes in the Cowl.
View detail
Fits: HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50
Durability is difficult
It broke down right away. 。 It's a shame View detail
The product is totally different from the picture. Not usable.
I was offended when they sent me the wrong product. View detail
Don't buy this exhaust!
Unfortunately, I bought it. the exhaust was already corroded upon delivery! the shipment was very poorly secured for transport. A rust-colored fluid is leaking from the end exhaust connection. the exhaust is too loud in certain engine speed ranges, it is poorly tuned. The manufacturer's response is simply ridiculous: "1. As the exhaust is heat cycled, the metal will expand and contract. So it will have a slight leak when the exhaust is brand new. Over time this will seal itself with carbon build up and the metal will expand/contract together. 2. The inside of the pipe is not ceramic coated, as this would discolor and flake anyways. The surface rust is nothing to worry about. Any loose surface rust will blow out of the exhaust as you ride." The leak continued. The factory exhaust is installed exactly the same, and there is no leakage or corrosion. I'm sure that in a few thousand kilometers the entire rear of the bike will be covered in rusty dust. View detail
![AluminumBillet master cylinder cap[DCR]Type-3](https://img.webike-cdn.net/catalogue/images/105539/09080249_5f5672ab55afa_TS.jpg)
Fits: HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA glom, HONDA FORZA250, HONDA CB125R, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA FTR223, HONDA CB223S, HONDA CBR250R, HONDA CB250F, HONDA CBR250RR, HONDA VTR, HONDA VTR-F, HONDA CBR400R, HONDA CB400F, HONDA 400X, HONDA FAZE
Don't leak.
Fluid will smear.
Mr. Manufacturer says there is no problem.
Diaphragm Plate should be present.
When I replaced it with DAYTONA, it didn't leak.
Is it Large sturdy if I get a new Diagram Flum?
But I'm not sure since I can't leak at the moment.
View detail
Screw holes did not fit.
I bought this for my GSX-S1000GT because it is a Universal Product, but the hole pitch did not fit.
It looks like it could be used if shaved, but I don't know if it doesn't fit because it is a Taper Bar, but I would recommend checking the fit before purchasing.
View detail
![Option Plastic Wire Bracket for High Throttle Kit [EVO2]](https://img.webike-cdn.net/catalogue/images/33257/1060364_1_TS.jpg)
It's a small plastic board.
Even though it is necessary and unavoidable, I feel that 1,500 yen is too much, no matter how much it costs. View detail
I can't connect to the dedicated Site at all, so no.
If you don't improve Site, it will be useless. View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON FL system, HARLEY-DAVIDSON FX Systems, HARLEY-DAVIDSON FL system, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON TOURINGFamily
It's broken
I installed it and drove about 80km and the needle stopped moving around 75km.
Stopping the system does not restore it to its original state.
Worst product I've ever seen. Lost my faith in them.
I wonder if you can replace it.
View detail
Fits: YAMAHA FZ750U, YAMAHA FZ750U, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250
Too bad …
Unfortunately, the hole diameter is not suitable for the 91 SR. If you are considering purchasing the Short Stand, you do not need to purchase it, as it can be attached to the original Spring without it. View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR150SP, HONDA CB1300SF, HONDA CB1000R, HONDA CB900F 919 HORNET900, HONDA CB750, HONDA CB750 F2, HONDA CB600F, HONDA CB500, HONDA CB500S, HONDA CB400, HONDA CB400SF, HONDA CB400 VTEC, HONDA CB-1, HONDA CB400F, HONDA CB150R, HONDA CBR1100, HONDA CBR1100XX
2BL-SC54 is not compatible.
I purchased this product with CB1300SB2019MODEL.
The tank side is narrow and the cap side is wide, and the screw holes do not fit at all.
So I will return it.
I think the quality is good
I would like you to check it carefully before you describe it.
View detail
Fits: DUCATI MONSTER 900, DUCATI STREETFIGHTER V2, DUCATI MULTISTRADA 1200 DVT S, DUCATI MULTISTRADA 1200 DVT PIKES PEAK, DUCATI MULTISTRADA 1200 DVT ENDURO, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI MULTISTRADA V2, DUCATI MULTISTRADA V2 S, DUCATI MULTISTRADA 1200 S, DUCATI MULTISTRADA 1200, DUCATI MULTISTRADA 950 S, DUCATI MULTISTRADA 950, DUCATI HYPERMOTARD 1100 EVO SP, DUCATI HYPERMOTARD 1100 EVO, DUCATI HYPERMOTARD 1100 S, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 939 SP, DUCATI HYPERMOTARD 821 SP, DUCATI XDIAVEL S
I received an item that did not look like the picture.
Note that you will receive a design that is completely different from the image!
Bolt came with only DBK written on it.
WeBig, manage your Page properly.
Too many items are in stock when there are no items in stock or anything like that, and too many other miscellaneous things!
View detail
Fits: HONDA CBR250RRR
The notation to arrive is false.
In stock" until the order confirmation screen:Quantity:2pc. Set" Delivery in about five days." and after I purchased it, the stock was 1pc. But on the delivery confirmation page Waiting for delivery (expected to arrive in 3-4 months) It was written.
Do not trust the description at all. I am very disappointed because I wanted it as soon as possible. I will cancel my order if I find the same item on another site.
View detail
Delivery date undecided, huh?
I ordered in August 2023 and was told that delivery was scheduled for mid-February 2024, but I canceled the order at the end of February because it showed "delivery date undecided". It arrived the next day after I placed the order on Amazon.com. View detail
![SMX-1 DRYSTAR(R) GLOVE [SMX-1 Dry starGloves][Fall/Winter ApparelOutlet][special price]](https://img.webike-cdn.net/catalogue/images/122147/3520723-12-fr_smx-1-waterproof-glove_TS.jpg)
No Smartphone Touch functionality
Despite the fact that it is listed as having the Phone Touch function, it does not respond on the Xperia.
I tried with two units, ACE and 5IV, both unresponsive.
Is it defective?
View detail
Delayed delivery time and time again.
It has been almost 2 years since I ordered. How many times have we had delays in delivery?
If I had been told from the beginning that the delivery time would be two years, I would not have asked for it.
If they say it will be delayed a month or two, then we wait a little longer. This is a repetitive process that has continued until now.
Once again, I would like to know the delivery date = the date when we can be sure of the supply.
View detail
in jeopardy
Flash mirror [Color] Purchased Clear. When backlit, my face appeared on the entire backside of the Shield and I was in danger of losing my vision.
When backlit, the back side is also Mirror. It is dangerous, so it was removed after one Touring and became Garbage.
View detail