Reviews
Durable
Vinyl is thick and has excellent oil and heat resistance, so it can be used in a variety of ways.
I use it for the fuel line and I can see the gasoline flowing into the rear hose and feel like I am customizing it. [Color] I'm glad it was Clear.
View detail
Used to repair a fuel hose on an old car.
I used this product to repair a fuel hose on an old car. It was a steady job to replace it, but there were no leaks and the quality seems to be good! View detail
Fuel hose
NSR50's fuel hose had deteriorated and was replaced.
I measured the size of the old Hose before I bought it.
View detail
Elasticity.
[How is it used?
TZr250R (3XV) I bought this to add a Filter to the Fuel line of
I couldn't bear to Cut the OEM Line, so I used this product.
Was the one you received as per Image?
When I touched the product I received, I was surprised by its elasticity.
The OEM Fuel line is quite hard, but I wonder if it was originally this elastic...
It looks like OEM at a glance, so it doesn't stand out as strange.
How was your experience with it?
I bought one with an inner diameter of 7mm.
The new rubber is very resilient and I was able to install the 8mm OD Filter without difficulty.
I bought this product because I didn't want to cut the OEM Hose, but I'm thinking of changing that to this product as well, since it's elastic and easy to put on and take off. LOL!
[Points to note]
The size notation is a bit confusing, but except for special sizes, if you choose one with a smaller inner diameter, you're basically in the right place.
Also, the Hose clip is not included, so you need to purchase it separately if you need it.
How did it compare to other products?
I also used a common Pink Hose elsewhere, but it became hard after less than a year.
I'm wondering how long this product will keep its elasticity.
【Review】
I don't know how long this elasticity will be maintained, but so far I am very happy with it.
The price for 1 meter is also good, as OEM Parts can cost around a thousand yen for a dozen or so centimeters.
View detail
Durability.
The vinyl is thick and has excellent oil and heat resistance, so it can be used in a variety of ways. [Color] It was a good decision to go with Clear. View detail
Securing flow rate
Used for TMR; Tank is PinGelSingle Silencer with Quantity:This is the best hose I've ever used because it's reasonable. View detail
Used for ZEPHYR
I used it on my ZEPHYR Fuel line.
I chose this one because OEM ProductSize is not sold to the general public, and I had to buy OEM Parts, which is not very cost effective.
I replaced the fuel fliter at the same time, and I have no problems driving.
View detail
Soft.
It is soft and easy to handle and use. The price is also cheap, so I can recommend it. View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA CYGNUS X, YAMAHA CYGNUS X
Just replace it with Race ish
As expected "KOSO RACING PARTS" I was wondering if it would look so race ish just by changing the color and the Hose of OEM. Hose Holder of KN project as well (Gold color) It's also a good match for View detail
OEM Product Quality
It's an OEM Product quality NTB, so it will be durable and Large durable. View detail
habitual use
I have been using the Pink version of this product until now.
In the Pink version, it started to harden in about 2 years in the Large body in a vehicle that is stored in a carport with a Cover during the day. I think there is no Large difference in durability in the color, but I bought Blue for a change.
The quality is fine, the elasticity and elasticity is high, so it is easy to handle. I also appreciate the fact that the Hose clip is included in the package. Because it is not something that is troubled by the loss and breakage by taking off and putting on, and there is a spare.
View detail
Since the Uni-flow cap is gone.
[How is it used?
I had ZETA's Uni-flow cap (https://www.webike.net/sd/1550633/) glued on, but then I noticed it was gone, so I replaced it with this one. It's sad.
Was the one you received as per Image?
It is just like the Image. But the Hose was about 10 times harder than I expected.
Was the installation difficult?
The Hose is hard, so you have to use a lot of force to get it in.
I hope it's hard to pull off for that.
How was your experience with it?
The Gasoline is going down to the carburetor with no problem.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I think it's a good idea to glue this in place as well.
View detail
No problem!
I had to replace it because it was getting hardened.
I think it's a great product at a great price.
View detail
You can use it immediately.
Universal's Fuel Hose.
With Clip, you don't have to make separate arrangements and can use it immediately.
Even with the addition of fuel filters, etc., the hose can be made Exactly the same length as the OEM Product without any discomfort.
It is easy to forget about the maintenance of the hoses, but the worst case scenario is that they will burn while running, so it is important to take care of them as soon as possible.
View detail
Safe feeling of the same etc. as HondaOEM Product
This is the Fuel Hose! This is the best choice. View detail
RZ250R [3HM] I used it for!
RZ250R [3HM] I bought it because I wanted a Hose that I could cut at any length because I use a 3MA Radiator for
I was relieved to see that the Hose looks sturdy.
View detail
I used it to Hose the Reserve tank of my RZ250R!
I used it to Hose the Reserve tank on my RZ250R Radiator.
It's a good and cheap product.
View detail
Used as Drain hose on old carburetor
I bought this for my Motorcycle Restore. It says it is not Gasoline resistant, but I bought it because it says it is for carburetor drain hose. It is good that the color can be chosen by two colors. I was a little confused and decided to go with Green. View detail
ได้รับสินค้าครบถ้วน สินค้าใหม่ แพ็คมาดี...ตามที่โฆษณา ราคาเป็นที่พึงพอใจ เชื่อถือได้คุ้มค่า จัดส่งถือว่ารวดเร็ว การให้บริการจากทางร้านค้าดี View detail
I use it on an external carburetor.
I bought the carburetor as Other Brand Product, but it didn't come with Hose, so I bought this one separately.
I think Skeleton type is better because you can see the flow of Gasoline.
good point
You can see the flow of Gasoline.
Oil resistant, so of course it is strong against gasoline.
You can use Scissors or Cutter to cut to your desired length.
Hose products also deteriorate, so it's good to have them as Spare.
View detail