Reviews
Circuit Running
I want to measure lap time in Circuit.
Purchased
I still need to know where to install the Sensor part and Wiring.
It was Large strange to pull it in.
We will verify if Time can actually be picked up properly.
View detail
Circuit Running
I bought this for a Circuit run.
As others have written, the Sensor portion of the
I am at a loss to install it.
Installation location, installation bracket, etc. are time-consuming.
It will take
You must be able to tinker with Motorcycle in a certain way.
Installation may be tough.
View detail
(degree of) satisfaction
Used in Circuit.
It is good to see the Best lap updates in Lamp.
View detail
A must for post-Sports driving analysis
[How is it used?
Used for sports driving in mini circuits
Was the one you received as per Image?
The Logger and GPS Antennas were as expected and easy to install on the car body.
How was your experience with it?
The positioning system is high, and the accompanying analysis PCSoft is well done.
If used well, various driving analyses are possible, which helped us to identify driving issues.
[Points to note]
GPSAntennas are exposed to the outside so as not to break in the event of a fall,
How did it compare to other products?
Improved positioning system compared to conventional products.
[Others]
DashWare can also be used to combine the log display with driving videos.
View detail
Indicator is good
The Lap time in the Circuit run is determined by the Indicator.
It would be useful to have more clarity due to its existence.
I'm not sure if the laps I just ran were good or bad, but I have a sense of what I'm talking about.
I can judge by the light without, so I can adjust how I run the next lap.
It is useful for
We replaced P-LA● for the above reasons.
It is not easy to improve just by running somehow.
Difficult, unnecessary falls, etc. by using good ITEMS,
I think we can reduce Risk.
View detail
It works for now, but ….
I repurchased this product because my previous purchase of the same product broke.
As it turns out, the malfunction was probably caused by the midsummer heat. After the malfunction, we rebooted the system, but could not solve the problem.
As a Lap timer for the time being, it may have some Advantage in terms of price, availability, etc., but it may not be a product that can be with us for a long time.
It would be better to use Awning in the summer or take other measures.
I was disappointed because this is a Manufacturer that has provided us with a relatively good product.
View detail
Failed 1 year and 3 months after purchase.
One year and three months after purchase, after about 10 times of use, a series of errors occurred and measurement became impossible.
I contacted Manufacturer and was told that it could be a Short in the internal infrastructure.
Unfortunately, it broke slightly past the one year warranty period, so we were unable to replace it under warranty.
The price of the Lap timer is not high, but considering that it will break down in a little over a year, I can't say I recommend it.
View detail
No problem, it worked!
It worked fine at Twin link Motegi! View detail
Used in Scooter race
Installed on a 4-stroke JOG.
After confirming that the Sensor responds to the magnet, it is brought into the Course, 10 cm above the mounting ground, and there is no response in Tokushima CartLand.
Next time I will ask CourseOwner if there is a magnetic bar and then try to adjust the Sensor position etc.
View detail
magnetism
By Circuit
The magnetic strength that can be picked up seems to vary
If there are times when you don't pick it up at all and don't even Start.
Start, but by the time you've done three rounds, you've done three rounds.
You can also try to display a wrap.
Circuit is able to measure and display every lap without any problem.
The fact that it is there means that as long as it can pick up magnetism, it should be fine.
I think it depends on the Setting of the user.
View detail
Sensor installation is troublesome
[How is it used?
Circuit
Was the one you received as per Image?
Image Street
Was the installation difficult?
I want to remove the sensor when driving on the street, so I need to devise a way to install it.
How was your experience with it?
Sensor installation is troublesome
View detail
Measurement accuracy is high.
I was using Dig spice3 and replaced it with Dig spice4.
Used in HRC GROM Mini bikeCircuit.
The measurement accuracy is higher than that of 3, so measurement errors are less likely to occur.
Size is almost the same as 3, so there is no discomfort.
It is a wonderful performance with increased accuracy.
The price is high, but it is more than worth it.
View detail
It's still better to have it.
The one I used to use before was submerged in water, so I…d better have it so I can see how many seconds I'm lapsing, which will motivate me to keep going. View detail
In Lap timer, the Popular
After all, it is difficult to find the Sensor's mounting position.
Use is fine.
Currently, I am using Button batteries, but when inserting the batteries, the lid is incredibly hard, and I was afraid that it would break if I put any more pressure on the claw.
Also, when I bent the BodyBracket, the paint peeled off ParaPara as shown in the photo (lol).
View detail
Recommended for introductory
I used it at Tsukuba 1000 without any problem.
It is a magnetic system, so it was inevitable, but Sensor installation was the biggest problem.
The LCD may be difficult to see from some angles, but the cost performance is excellent.
View detail
It is encouraging.
after all is said and done "I know my current situation, my status on the day, and my Levels." That's a good idea!
No pressure ≒ fall Risk reduction ⇒ long and enjoyable". That would be the case.
I am not aiming for Time in the dark, but it is nice to know the Level as a concrete number.
Especially AttackIndicator is a sectional Best; Green Light 、 Less than that; Red. It is very encouraging because it is displayed each time at the
I am not good at working, so I asked Shop to do the installation.
The power supply is taken from Battery, but the Instruction Manual for handling "Battery may rise and should be disconnected when not in use." and it is necessary to disconnect the Body's connecting wires (3 wires) except when driving. (This is not a hassle and I don't feel it is a minus point). (This is not a hassle and I do not feel it is a minus point.
Another thing to keep in mind is that 'Protect them from the sun when they are at rest.' This means.
It is not a problem in light sunlight, but if the TimeaTuckerBody is exposed to strong sunlight and heats up too much, the LCD Panel will not display. This has been confirmed by contacting the Manufacturer. Therefore, I cover the body with a Towel during intervals in the Circuit on days with strong sunlight.
I am very satisfied with the performance of the product and highly recommend it!
What's strange about the Circuit run is that Sometimes you get your best time when you think you're playing along." I guess that's what you mean! LOL.
View detail
Bug after 20 consecutive laps of use.
After about 20 laps of continuous use of the mini circuit (about 50 seconds per lap), the LCD display is bugged and does not work properly.
It works normally by replacing the batteries and turning the power on and off several times.
We also tried regular Alkali and EneLoop batteries.
The cause is not clear.
View detail
I can recommend it.
I think it's a good product
This kind of lap timer is essential for those who run Circuit.
Cost performance is the best.
We are using it at Tsukuba Circuit without any problems.
I used to use LAP SH**T, but it had reached the end of its life, so I replaced it. In terms of appearance, I feel that this product is somewhat more robust, with thicker sensor wires, etc.
I was concerned that the angle dependence of the LCD contrast is large, making it difficult to check the time while driving, depending on the angle at which it is mounted. If the dial is angled too far away from the front, the letters will become faded.
View detail
Mounting position
Installed on GSX-R125 at Circuit Running.
I had a hard time finding a place to install the Sensor. I tried to install it around the Rear Suspension Link, but I am not sure if it will respond.
The thickness of the body is not so bad, so the installation space around the meter is also limited.
As others have commented, the included Magic tape is weak and insufficient, so I recommend buying it.
Convenient because it's rechargeable, and I'm satisfied with the price.
View detail
Compatible with most Circuits
When I went to run Circuit a few times, I became curious about how many seconds I was running and bought one.
The installation is easy if you are familiar with the electrical system.
The only thing that bothers me is the location of the Sensor.
Depending on the Motorcycle, it is very difficult to decide where to put the Sensor.
In the Racer's Under Cowl, the Sensor is deformed by the heat of the Exhaust System, so a little ingenuity is required.
It is very useful because it is easy to know the time.
View detail