Reviews
Recommended for SV650 riders.
They have been helpful in protecting me from stepping stones while driving. View detail
Custom effect available
Can be used in exchange for OEMParts.
The texture is much better than NORMALRubber because of SiliconHose.
It can also change colors and has a custom effect.
It is necessary to do a full rose shi around the Radiator for installation.
It requires a certain amount of skill, tools, etc.
We replaced it when we did a full rose shi for maintenance of the cooling system.
The installation itself took about two hours.
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R SE
I can recommend it.
OEM Parts, so even beginners can install it normally.
I know it's not much to look at, but I wanted to give a little more thought to the design,
Star Minus1.
View detail
Replacement of DAYTONA battery-powered CompactMeter
The 2nd was a battery-powered Daytonacompact temp meter due to malfunctions with Noise. Every time I changed the battery, the nail broke or the battery could not be fixed properly, and I ended up with 3Quantity:I bought a set. I wish I had bought the KOSO set earlier, considering the fact that the DAYTONA set will go into HHH mode if it exceeds 99.9c, making it impossible to measure. I am going to install the Minus at the Body ground and the Plus at the Bullet Terminal with a branch from the Tachometer Wiring. From several people's installation examples, it seems that Noise is not a concern. View detail
There are effects that can be felt.
I installed it on the last model of SR400 and ran about 300km.
Installed to SP Tadao's PowerBoxPipe attached first.
The wobble during gear changing is clearly reduced, and the overall ride is smoother.
Perhaps it is so effective that anyone can feel it.
On the other hand, is there a slight decrease in the sense of "do-do-do"?
I chose the one with a window so I can visually see the flow of Oil.
No complaints about the functionality of the product, and the construction itself is beautiful and can be installed without any discomfort.
Mounting Screw is Material:I guess the drawback is that it is aluminum and weak, so it has to be tightened with care.
It is a good product overall.
*Blue SWAGE LINE and Logo engraving on the body have been eliminated with the Spec. change.
View detail
Fits: HONDA PCX, HONDA PCX160, HONDA LEAD125, HONDA LEAD125, HONDA ADV160
A good dish for a quick custom!
It was a little difficult to install, but we were able to do so!
I like the way it looks!
View detail
Good parenthesis with the same color as the body.
CRF250L (MD47) The coolant was replaced as an incidental part of the coolant replacement of the
Compared to OEM Products, Material is Material:Silicon was also there and the product was soft and the work was precise and arrived without difficulty.
The Red Hose stands out in appearance and Parenthesis is good. (^_^)
This will allow me to ride with peace of mind for the time being.
It is softer and easier to wear than the OEM Product.
Recommendation Products
View detail
Parenthesis good!
Since the resin products are combined with each other, the assembly of the three One Side products, including the drilling process, must be done gradually and evenly, etc.
The nut on the upper side of the drilled hole is small in relation to the hole diameter, and since it is made of resin, it is better to use a washer to tighten the nut.
If you take care of that, it will fit Exactly, and the finish is Magical quality and perfect.
I am pleased with how well it matches the body of the car, which was repainted in Black Meta.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Easy installation, no need to remove Cowl
Purchased to protect and hide scratches after a bug hit the Radiator and crushed it while driving on the highway.
It was easy to install on a 22 yzf-r25 in about 5 minutes.
The texture is firm and will provide a high degree of PROTECTION.
View detail
Tightens the atmosphere around the Radiator
The OEMBolt was installed with no problems, it is SMART than the OEMGuard, and the Radiator is more secure in terms of protection. View detail
Mounted on APE
It is functioning well.
I took it out of the Cylinder and put it between the coolers, but it feels a little tight, probably due to the Sensor.
With the Rubber hose, the Band looks like a Large amount, so you may not be able to put it on if you are concerned about its appearance.
View detail
For replacement from OEM.
OEM Radiator core guard was replaced due to a hole and Rust.
The OEM is made of steel and coated with rust-preventive paint, but if it is scratched by stepping stones or other objects, the paint will peel off and rust will progress from there.
Once this happens, rusting occurs under the paint, so it would be better to replace it if signs are seen.
Material:Since it is Stainless Steel, there seems to be no need to worry about the occurrence of Rust in the future.
Installation requires removal of the Side Panel, which takes a surprisingly long time. It is recommended that this be done together with other work.
View detail
Visibility GOOD!
I wanted a voltmeter for my motorcycle, but this temp meter can measure water and oil temperatures at the same time. I wanted a voltmeter to keep track of my motorcycle's physical condition. The instruction manual is very helpful and easy to understand. View detail
YOSHIMURAProgress2
Fixed to MeterScrew using CarbonBracket.
It fits perfectly and is perfect. Oil temperature, voltage, and clock are visible for peace of mind.
View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB150R, HONDA REBEL500, Others , HONDA REBEL250, YAMAHA CYGNUS X, HONDA CB250R, HONDA CB250R, HONDA CB125R
For oil temperature sensor installation!
It is a necessity for oil temperature sensor installation.:It is aluminum, but it is solidly made and seems to be durable. View detail
The netting is too soft and difficult to replace.
The netting is soft, so when the bolt is tightened, it flattens and is not parallel to the bolt. View detail
Attachment was installed using a separate Attachment.
It is attached using Attachment between RadiatorUpperHose.
There are similar products other than KOSO, and the font style of the numbers is difficult to read in the similar products.
The image is KOSO OEM Product.
OEM Product is in short supply, but we had it in stock here, so we purchased it as a spare.
View detail
high quality
I had installed it on my other car and loved the high quality, performance and design, so I had no hesitation in choosing this one.
The 1050DE was not listed as a compatible car model, but it could be installed without any problems.
I am satisfied with the Large change in terms of Radiator protection as well as appearance.
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Looks defensive and surprisingly light
[How is it used?
Not only for forest roads, but also for standing stones.
Was the one you received as per Image?
Seems lighter than expected. Seems to be defensive.
Was the installation difficult?
The instruction manual was very helpful, but one thing it did not fully describe was how to install the cable while forcibly releasing the cable and other parts.
How was your experience with it?
I don't want to fall down!
[Included Parts:were they on?
No shortage of installation.
[Was there anything that disappointed you?
Plate was clean but had some spot corrosion on the shaft….
Other items that would be helpful
Exterior and tank displacement must be done as described in the instruction manual, because it was tough if not done as described.
View detail
I purchased an additional temperature sensor.
Damage occurred because the mechanic was clumsy in removing the sensor. It is reusable, but I bought an extra sensor just in case. It is very nice that only the sensor is sold separately. There is no problem with the replacement as anyone can do it. In the future, when replacing an engine failure, I think it would be better to separate it myself or go to a service station. -------------------------------------------------- -------- The mechanic was damaged by the separation of the sensor. It is possible to reuse, but I did not know, so I bought an extra sensor. It is very good to sell only the sensor separately. Replacement is not a problem that anyone can do. I think it would be better to go to the stoppage by separating it directly when replacing the engine. Powered by Google Translator View detail