Reviews
Fits: HARLEY-DAVIDSON Sportster, HARLEY-DAVIDSON FXR, HARLEY-DAVIDSON Dyna., HARLEY-DAVIDSON FXSTC
LED Replacement
I wanted to reduce the heat generated by Halogen, so I decided to try LEDs for the time being. View detail
Flashing relay
GSX-1000 L3 is installed.
Since Relay is in the Blue circle, it is easier to Rose Seat Cowl as much as possible, and since Relay itself has a protrusion to prevent it from falling out, Space is needed to knead it lightly with Minusetc.
Things are OEM same etc. and not so good or not so good.
View detail
![[Rough Craft ION] Ultra-Small LED Blinkers](https://img.webike-cdn.net/catalogue/images/105463/09150249_5f5fad1a635dd_TS.jpg)
Light intensity is sufficient for your needs.
I purchased this as a Rear blinker for my HPS300.
The light intensity was sufficient and no Relay replacement etc. was needed.
Use the included Sleeve to tie the wires together. It is not a difficult task, but there is no spare in case of failure, and I have not seen it in Home center, so if you need a spare sleeve, you may want to buy one from Amazon or other places.
It's a personal preference category, but I think Lens is the way to go. [Color] If there is a smoked lens model, I would like to replace it.
View detail
![[Option]Bullet Atto/RhombusS/microS Mounting Section Conversion Adaptor](https://img.webike-cdn.net/catalogue/images/52549/KM152-812_TS.jpg)
Fits: Others microS, Others RhombusS, Others Bullet Atto
Kellerman OEM Product
Purchased to install Kellerman's Blinker.
I was able to install it without any problems.
View detail
Beautiful!
I'm glad I replaced it because it's bright and clean.
Visibility from vehicles behind is also good.
View detail
POSH Faith Posh Face Repair Lens Packing
It is a well-known Manufacturer and the product is well made. View detail
Fits: Others , YAMAHA SR400, YAMAHA SR500
This is what you get if you shorten it.
OEM modified and installed on short fender
The holes in the Type 2 Fender do not match, so modification was necessary.
View detail
Replacement with BlinkerLED
I was able to install the lamps as is with almost no modification. The grounding wire is long, so there is plenty of room when attaching the terminals, which is very good. I am satisfied with the quality and the low price. View detail
Fits: YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA XSR700, YAMAHA MT-09 SP, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
For Repair
Purchased because I broke the Rear blinker by so-called cold cocking it.
CB400 NC39 SPEC1? OEM discontinued.
I thought about using a reproduct, but the bulb rating was low and I thought it would be a high flasher. If so, I decided to use LEDs.
Smaller than OEM, so Posh's 40mm extension was used for installation.
View detail
I want to increase the amount of protrusion.
Used to extend Y's Gear's LED Blinker.
The bolt on the Blinker side is long, so the supplied bolt was shortened by about 6mm for installation.
View detail
You can get the standard Hazardization!
This is the standard Hazard conversion for the sister JigSar, but it is not on the DL1000 V-STROM250SX either!
So, you can get that functionality with this Parts, (1) replacing the Blinker relay, (2) processing the wire to the Blinker, and (3) installing the Switch with the purchase of the Option!
Actually, I had a hard time with Wiring, but once I figured it out, it was easy.
(I don't know enough about it, and I have a feeling the Instruction Manual could be written a little better)
In the case of our car model, the paper Instruction Manual that came with the car was even older, so I don't need to refer to it, but the instruction manual on the website says For SUZUKI⇒Right (young leaves) Left (Black), etc., while Right is a light Green color (is this right for young leaves?) and Left is purple (→It was not Black, was it?), and the line coming from Relay of DAYTONA is Blue color→Right Side (Light Green, right?!) to match it. and the Orange line is Left Side (Purple, right?!). It's easy if you know that.
Incidentally, the Relay replacement was under the Seat, so the Blinker line is also interpreted on the back side.
Well, it worked out that way, and it is perfect!
View detail
The night is fun.
It feels quite bright.
If you adjust it with the mounting angle, you may not be dazzled by oncoming cars, etc. lol
View detail
Fits: KAWASAKI Z400FX, KAWASAKI FX400, KAWASAKI Z1, KAWASAKI Z2, KAWASAKI Z400FX, KAWASAKI FX400, KAWASAKI Z1, KAWASAKI Z2
Marshall
Cat Mark is the best Parenthesis. View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
I put it on my RG 50Gamma.
It's just like changing a light bulb.
There is no problem
View detail
LED
Excellent brightness, no return to Halogen View detail
![Universal Blinker Relay [MISUBA]](https://img.webike-cdn.net/catalogue/images/31959/12032221_529ddae1b6601_TS.jpg)
No lights
[How is it used?
CHAPPY (CHAPPY) I bought the Blinker relay because the Blinker of the Blinker did not stick and the Blinker relay seemed to be no good.
I bought it trusting that it was for 6V, but as a result, I could not use it.
Was the one you received as per Image?
It was just like the picture.
Was the installation difficult?
No tools are required as it is simply a matter of removing and replacing the Connector in a position that can be touched from the outside.
How was your experience with it?
I don't know if it was not generating enough power or if it was an initial defect, but it did not work.
I thought it would not be possible to use the new one, so I did various TroubleShot and could not find the cause.
I thought it was impossible, so I replaced it with a Chinese 6V compatible Blinker relay, and it lit up fine.
[Included Parts:were they on?
It also comes with a Rubber Cover.
[Was there anything that disappointed you?
I bought it because it is 6V compatible, but...
【Review】
I was expecting it to be cheaper than Blinker relay, which is a No Brand product and handled by KN Planning, but....
I don't know the cause of the problem as it is my first time to touch a 6V car, but is it a power consumption problem or an initial defect? I can't use the Chinese Blinker because it lights up and this product doesn't light up.
View detail
Can be used for socializing.
I don't know if I will use it, but I have been wanting a "Round and round Tail" for a long time, so I bought it. I bought this one because the price is not so different from the one that is priced at about 2,000 yen from Yahoo! View detail
LED Bulb from leading manufacturer
Stanley is a leading manufacturer of OEM parts.
I am satisfied with both the brightness and the spread of light. The picture was taken with the position lamp in place.
The original brightness of the Valve is brighter than the image because the brightness is set to low.
View detail
Large satisfactory considering the price!
Satisfied with both brightness and visibility.
In actual use, I prefer the 4500K recommendation.
View detail
Fits: HONDA CRF250L, HONDA CRF250RALLY, HONDA CRF250L
A little bit of installation. ? Will be
As others have mentioned in the review, the convex part to fit the lower cosmetic bolt×1 and the upper OEM bolt×2 do not fit if they are left as they are.
The lower inner side is fitted by grasping and compressing the inner side with your hand.
I am a little impatient because this area is not in the Instruction Manual.
I am not sure if it is only for the 2023 model, but there is a 5mm pin hole on the inner cowl side, which is flooded with slop water, so I filled it with Pate.
You can see it when you actually fit it, but it is a pin hole that does not bother you that much, so those who do not mind may not mind it.
I wanted the Fender angle to be a little more warped, but since it is a regulatory Limit, other Fender Eliminators may be the same.
View detail