【Yamaha Europe】LED Blinker Review

LED Blinker

It is a little expensive, but I am satisfied with the shape and stylishness. View detail

YamahaOEMBlinker

The look is Carbon Style and cool, and the brightness is bright and perfect. View detail

I am repeating this LED Blinker on my Yamaha car.

[How is it used?
I installed this product on my 2014 YZF-R1 Rearfor Blinker as a LED winker conversion. (I'm considering to convert Front to Built-in)

Was the one you received as per Image?
As a YamahaOEMLED Blinker, it was small in size and true to its image.

Was the installation difficult?
Since I have an external Fender Eliminator on the rear, I used the included RubberSpacer to add bulk, but the body just barely sticks out.

How was your experience with it?
If you install it as it is, one-third of the body is hidden by the width of the License Plate, so I raised it with the included SpacerRubber. It may be possible to consider further raising the height with a few more centimeters of Spacer.

[Included Parts:were they on?
OEMRelay-compatible resistors and Brackets were also included.

[Was there anything that disappointed you?
nothing special

Other items that would be helpful
Opinions and requests to Manufacturer
I would like to sell from Body1pc. as a part, as a supplemental part. View detail

Installed on SEA BASS Motorcycle.

[How is it used?
The design of the OEM blinker of the GSX-S1000F was not to my liking, and while searching for a blinker with a better design on Webike, I found an LED blinker with the design I liked in Yamaha's Option product. I found an LEDBlinker of my favorite design in Yamaha's Option product, so I bought it.
I am now going around and using it on my SV650X.
Was the one you received as per Image?
Today, LED blinkers of various designs are available from various companies, but at that time, LED blinkers were just starting to be released by ThirdParty, Parenthesis is good!" The price of Blinker, which seems to be a good idea, was still too high to be easily replaced.
In such a situation, this product is for one unit (4 Blinkers). If you work hard, you can reach it." When I learned from Webike that it was available in my price range, I did not hesitate to purchase it, and it is just as Image described.
Was the installation difficult?
This time it was included in the package. Resistance is not used, but rather an LED-compatible ICRelay made by DRC.
Essentially, one resistor is attached to one BlinkerWiring and connected to the Wiring on the car body side.
Cowl removal and installation rather than installation of this product. "Getting there and after installation." work was tedious.
Once the exterior has been removed, the only thing left to do is to remove the OMBlinker and replace it with the product, and then use a different manufacturer's product. Cowl mounting collars will be almost complete.
The Wiring connections are "Bullet Type Terminal So, if you replace it with the OEM TypeCoupler for each manufacturer sold at KITACOConvenienceParts or Poshetc., you can have the same beautiful Wiring process as OEM.
How was your experience with it?
As expected of a Yamaha OEM option product, we are very satisfied with the CoolDesign, which is neither conspicuous nor causes deterioration of visibility.
[Included Parts:were they on?
Quantity of 2 BlinkerBodies and 2 resistors to be attached to each:Set, 2Quantity of this product for 1Large vehicle.:You need to purchase Set.
[Was there anything that disappointed you?
No complaints, high quality, and if you like the design, you will love it.
Other items that would be helpful
Point and hang of installation
By Vehicle or Manufacturer Blinker mounting collars. can be purchased separately for uncomfortable installation similar to that of the OEMBlinker.
[Availability and clarity of the Instruction Manual
There is an Instruction Manual, and although the level of difficulty is a little higher for those who are not good at electrical work, it is manageable if you read the Instruction Manual carefully.
[Notes]
If the OEM has a vehicle with LED Blinker, the included resistors and LED-compatible ICRelay are not required.
[ITEMS TO BUY TOGETHER
For vehicles that have a Large threaded hole when removing the OEMBlinker, it is recommended that the vehicle be fitted with the appropriate Blinker mounting collars. if you want to do a Beauty Wiring process like the OEM state. OEM TypeCoupler by Manufacturer If you don't want to install resistors on each Blinker, you can use the LED-enabled ICRelay separately.
[Opinions and requests to Manufacturer
I like the design, so it would be great if you could change the model to a more modern style of LEDs where you can't see the grains of LED bulbs while keeping the same exterior shape. View detail

MT-09 YamahaEuropeLED Flasher

I was looking for an LED Blinker that is not too small, as the MT-09 (2017MODEL) Blinker is not a standard LED. I also didn't like the OEM mounting position, so I tried to change the position as well.
The Front was changed to the position next to the Meter, and the Rear was changed to the License Plate, giving it a cleaner appearance.
The YamahaEuropeBlinker is not plugged into the OEMCoupler (gibo), so it takes a bit of work, but it is not too much trouble.
Design, I have no complaints about the light level. View detail