Reviews
Since it did not care for a pure fender, it exchanged. By having exchanged, a rear tire is emphasized, a stainless plate also shines and it is the highest. ~ which becomes easy to clean the flesh side of a fender. if the road of a demerit is w
Since it did not care for a pure fender, it exchanged.
By having exchanged, a rear tire is emphasized, a stainless plate also shines and it is the highest.
~ which becomes easy to clean the flesh side of a fender.
if the road of a demerit is wet, mud will splash, but since a rainy day does not ride, it is perfect -- it is .
A passive reflector can also use a pure style as it is, and regards it as their being good goods since an automobile inspection is also correspondence.
Although it had a close game for attachment ...
View detail
It is used by the gorilla (12V). Since it is carbon, appearance may become tight, and lightness is charm too. Since a form is also normal-shaped, it can attach comfortable. YO which is recommended although it is slightly high.
It is used by the gorilla (12V).
Since it is carbon, appearance may become tight, and lightness is charm too.
Since a form is also normal-shaped, it can attach comfortable.
YO which is recommended although it is slightly high.
View detail
Although processing called cutting of a pure fender and drilling was required, it does not have a problem. The price was also shopping with handy and sufficient sushi.
Although processing called cutting of a pure fender and drilling was required, it does not have a problem.
The price was also shopping with handy and sufficient sushi.
View detail
A chain cover easy [ the attachment which thinks can prevent mud HANE to the bottom of a sheet very much although the photograph attached to VTR250'05 is not running in the still wet state of being Black of FRP ], and pure is removed, Stay is put betw
A chain cover easy [ the attachment which thinks can prevent mud HANE to the bottom of a sheet very much although the photograph attached to VTR250'05 is not running in the still wet state of being Black of FRP ], and pure is removed,
Stay is put between the holder of the brake hose on the right-hand side of a swing arm,
Since [ the ] it is a form which fixes four right and left with a bolt, it carried out in sushi, the bolt hole by the side of the forward right of a fender is shifted from stay about 1 cm and a bolt was not able to be tightened.
Although stopped at three places, there was no thing which are likely to be satisfactory and which is interfered although the suspended tray of N project is attached under the sheet again.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 100
Only commuting is used. A sharp decrease in splash. Style good. It fixes using two of three established bolts. An attached sticker closes the hole which remained. An attached screw is the socket cap screw 5x15.
Only commuting is used.
A sharp decrease in splash.
Style good.
It fixes using two of three established bolts.
An attached sticker closes the hole which remained.
An attached screw is the socket cap screw 5x15.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
It is used by the gorilla (12V). It attached on the occasion of extension of a swing arm, and inch[ 10 ]-izing. It is light at simple structure and I think that it is good. Since it finished with the fixing position of the number exactly, it w
It is used by the gorilla (12V).
It attached on the occasion of extension of a swing arm, and inch[ 10 ]-izing.
It is light at simple structure and I think that it is good.
Since it finished with the fixing position of the number exactly, it was felt refreshed.
I think that a price may also be handy.
View detail
Fits: YAMAHA FZ-8 FAZER, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-8
Although there is the necessity of removing tail cowl Assy and it was delayed somewhat, it is only 1.5h, and it is job finish. It is large satisfaction at the circumference refreshing of rear one!!
Although there is the necessity of removing tail cowl Assy and it was delayed somewhat, it is only 1.5h, and it is job finish.
It is large satisfaction at the circumference refreshing of rear one!!
View detail
YZF-R6 It can equip satisfactorily by 2010 models. Not formation but an attaching part and number blinker stay with a car body are really assembled with a lock nut. It can choose, when assembling the pattern using the stay for using a pure blinker
YZF-R6 It can equip satisfactorily by 2010 models.
Not formation but an attaching part and number blinker stay with a car body are really assembled with a lock nut.
It can choose, when assembling the pattern using the stay for using a pure blinker, and a pattern without blinker stay.
Attaching accuracy was also satisfactory although I used the pure blinker.
Moreover, an LED number LGT is very bright.
Although the description had a place in which a photograph does not appear easily due to black and white, since it also had explanation by the text, it was satisfactory.
If adjustment of a number angle can be performed, it will be an ideal, but as a product, it is satisfactory.
View detail
The set is with good quality, fits and easy to install. With the description, I could fix it by myself. The set is stylish.
The set is with good quality, fits and easy to install. With the description, I could fix it by myself. The set is stylish. View detail
Since the dirt of the rear suspension circumference was severe at VTR250, this fender was attached. The delivered article is slightly uncertain lightly... Although it and an outside surface were glossy as it is, it attached, after the inner surface ou
Since the dirt of the rear suspension circumference was severe at VTR250, this fender was attached.
The delivered article is slightly uncertain lightly... Although it and an outside surface were glossy as it is, it attached, after the inner surface outside surface painted the clear lacquer just to make sure several times.
Attachment is very easy.
However, although a hole is made in a normal chain guard, ... is also solid after attachment, and hesitation also OKs appearance to it for a moment! The dirt of the important Sas circumference was also eased.
(It does not become dirt zero) If the merit and dirt of appearance ease at this price, I will consider a conclusion as it is better to attach.
a manufacturer's inner fender of this about is pure from the first, and I want you to attach it
View detail
Fits: HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA XR100 Motard, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA XR100 Motard
It purchased in the measure against splashes of mud of the circumference of rear one. A size is perfect for since it has made according to the vehicle type. Although attachment had become a cable tie stop, he was fixed to the swing arm by the scre
It purchased in the measure against splashes of mud of the circumference of rear one.
A size is perfect for since it has made according to the vehicle type.
Although attachment had become a cable tie stop, he was fixed to the swing arm by the screw-thread stop.
View detail
although he thought that it could equip easily and being purchased, it is removing a rear wheel ... with what at the instruction manual -- coming out -- isn't it? being such -- things cannot be carried out -- the jack-up (sweat) was carried out and a shoc
although he thought that it could equip easily and being purchased, it is removing a rear wheel ... with what at the instruction manual -- coming out -- isn't it? being such -- things cannot be carried out -- the jack-up (sweat) was carried out and a shock was removed, and it put in forcibly, protecting by hand so that a crack may not go into a carbon side.
Although it was divided or I was fearful (smile), the comment after attachment are very smartly excellent also in practical use (splashes of mud).
Since a mounting arrangement changes with vehicle types, it is large satisfaction except it!
View detail
With carbon, appearance is also good and light. Since it was accurate, attachment was also easy. Rear suspension also becomes difficult to become dirty and it is dramatically pleasing.
With carbon, appearance is also good and light.
Since it was accurate, attachment was also easy.
Rear suspension also becomes difficult to become dirty and it is dramatically pleasing.
View detail
The appearance after attachment is dramatically good. However, the accuracy of FRP was bad and it took pains over attachment dramatically. Moreover, since the hole for wiring of a blinker was not open, it was troublesome. Therefore, they are t
The appearance after attachment is dramatically good.
However, the accuracy of FRP was bad and it took pains over attachment dramatically.
Moreover, since the hole for wiring of a blinker was not open, it was troublesome.
Therefore, they are three stars.
View detail
It attached to N'FZ1 08 domestic specification. Although it was a little shorter than the thing which was being seen and imagined by the catalogue, since it is a design which flows beautifully, without failing the body line of FZ1, it is large satisfa
It attached to N'FZ1 08 domestic specification.
Although it was a little shorter than the thing which was being seen and imagined by the catalogue, since it is a design which flows beautifully, without failing the body line of FZ1, it is large satisfaction.
View detail
Fits: HONDA NSR50, HONDA NSR80, HONDA NSRmini
It purchases by F disk-ization of an ape. Ella has stretched, an edge works and he is smart. It is safer not to use as it is, if it sees by long Sakka since the clear is not simply blowing.
It purchases by F disk-ization of an ape.
Ella has stretched, an edge works and he is smart.
It is safer not to use as it is, if it sees by long Sakka since the clear is not simply blowing.
View detail
It attached to the ninja 250R. Although compared with the product made from A-TECH, these goods were purchased by the design (since the product made from A-TECH felt it as the race ish). Since the bolt hole had shifted about 3 mm, attachment carri
It attached to the ninja 250R.
Although compared with the product made from A-TECH, these goods were purchased by the design (since the product made from A-TECH felt it as the race ish).
Since the bolt hole had shifted about 3 mm, attachment carried out Cali Cali with the DAISO router.
It only fixes with two bolts and two insulation locks.
Moreover, it is not necessary to remove rear brake hose stay.
View detail
honest -- I did not think changing so far. I think that the circumference of rear one felt it very refreshed, and became a sporty.
honest -- I did not think changing so far.
I think that the circumference of rear one felt it very refreshed, and became a sporty.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
The circumference of a front feels it refreshed. A rainy day also achieves a function firmly as a mudguard. Since it is a product made from carbon, it is light. It is durable.
The circumference of a front feels it refreshed.
A rainy day also achieves a function firmly as a mudguard.
Since it is a product made from carbon, it is light.
It is durable.
View detail
It equips for the splashes-of-mud prevention from a rear tire! A check design is smart. if somewhat long, you also acquire a feeling, and does force appear in a rear view?
It equips for the splashes-of-mud prevention from a rear tire! A check design is smart.
if somewhat long, you also acquire a feeling, and does force appear in a rear view?
View detail