Reviews
It works exactly as I expected.
We were looking for something that could be installed without disrupting the design of the vehicle too much.
The bar that comes out from the top of the tail lamp works well, and I am satisfied with the ease of handling.
Installation is also very easy. However, although it can be done with Phillips Screwdriver, we recommend the use of a socket wrench.
View detail
Looks only but satisfying.
Items that make the Normal tank cap look custom.
It is more satisfying than I imagined it would be when I put it on.
The paste is firmly attached as it is a quintessential Manufacturer's product.
It cannot be compared to the dubious Chinese products etc....
The durability is unknown, but the adhesive seems to last quite well.
View detail
more than expected
Compared to replacing a Single Seat, it is inexpensive, and it is a good cosmetic product with direct information from Motorcycle. View detail
![Screen [Sports touring]](https://global.webike-cdn.net/photo/impression/08/081163e0690ca05d865a001e79c31f09L.jpg)
Anyway, it's huge.
I bought it for its windproof performance, but it was too large and didn't fit my GSX1300R HAYABUSA well enough to not detract from its design.
Motorcycle that is more like a tourer would have been more suitable.
I feel like I'm looking forward through the Screen, though the area of wind on the highway has been reduced.
If you are not sure about the Screen of Sports touring, I recommend Short Type.
View detail
Processing required
It will stick if you put it on as is, but … the corners will float.
The hole on the front side was enlarged with a stick file while observing the position of the hole by placing it against the cowl based on the hole on the front side.
Two in the middle row (Quantity):Pair (for Left and Right) The first two holes in the upper row were enlarged toward the center, and the two holes in the upper row were enlarged toward the front (in the direction of the middle hole).
It is an easy material to shave, so it is not that difficult, but the corners still float a little.
The screen shape is rounded, so the center of the screen may be concave and the corners may float due to the straight line between the expanded tension and the fixed position of the front side.
It might be a little better if you put urethaneetc. from the back between the holes on the front side to make the center part thicker….
The texture is very good. It is a thicker, solid Material and heavier than it looks.
The outer edge is Blackout like OEM, so the color of the Cowl will not show through.
Screen color is [Color] Smoke
*Late 400 Bikini cowl is common with 1100 and 1200.
View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZrX1200 DAEG (ZrX1200 DAEG)
MRAScreen
Changed from Gradation to Black.
The black color will be more attractive, and the image will be cooler.
It's also easy to replace, so it's a RECOMMENDATION.
View detail
![[K TOUR] Rear Carrier](https://global.webike-cdn.net/photo/impression/1b/1b2e1aeabb902fac7662e29253aec02fL.jpg)
As expected from KITACO.
We waited about 10 months for delivery.
I chose this Rear Carrier because it has the largest load weight of 7 kg.
Installation workSkill is low, so I was quite anxious about the installation, but I found "MONKEY125" on YouTube. Searching for "KITACO Rear Carrier," I hit on several videos and watched them several times the day before installation to have an installation Image.
The installation process was surprisingly Smooth.
The installation accuracy of this Carrier is quite high, the Bolt hole was Exactly and the Installation Instruction Manual was easy to understand. As expected from KITACO. I guess you could say that.
The only thing that was a little more difficult was the removal of the suspension.
There is some work to remove the suspension and relocate the upper Washer to the lower side, but only here. [Color] If you can Clear, most of them can be installed.
I am not sure if there is a better way to install the box.... There may have been a better way to install the box, but...
I think the Rear Carrier is a must for those who are looking for loading capacity as the MONKEY125 has little loading capacity, but I think this Rear Carrier is a definite choice. I think this Rear Carrier is the right choice for you.
Sorry for the long post.
View detail
Installation is a little troublesome
The product is completely for looks only, but I am highly satisfied with it. However, the price is almost double that of UniversalEmblem, just because it is an exclusive product.... Be very careful when installing this product, as it may damage the tank. (We referred to a video on YouTube for reference.) View detail
Clutch leverWobble eliminated
Clutch lever Wobble one-shot elimination of concern
I added a bar end mirror, so if there is a Wobble, it will interfere with the Mirror Bracket, so I added this.
Smooth Clutch operation is now possible. 0
View detail
Say goodbye to stacked Washers!
Used to install Cowl Bracket on Zr-7S.
I bought it to install Bracketetetc. to Beauty, which is not adding up as I customize it.
In the temporary installation, I had stacked the Washer for M8 Bolt for now, but it was not beautiful and not good for my mental health, so I decided to use a proper color.
It is beautifully machined and anodized, so it is hard to corrode.
Various sizes and colors are available from various companies, so it is helpful to be able to choose according to the dimensions and colors you want to use.
This time, I was looking for something with a less large outer diameter, so it was a great help.
View detail
Volume is there and Parenthesis is nice!
[How is it used?
I bought this because I wanted to have volume on the side cowl following the front mask.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Drill holes and fasten with screws in the same way as for the front mask.
How was your experience with it?
It has a uniform look and feel, and Parenthesis is good.
[Included Parts:were they on?
Screw and Receiver, Stikeretc.
[Was there anything that disappointed you?
Not particularly
▼I would like to create a unified look like WirsWin's Complete car.
Recommendation of Painted.
View detail
Stylish!
[How is it used?
The design of the NORMAL front mask is not good, so we decided to use this twin-lens style type.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Drilling is required, but the rest can be easily installed with screw clamps.
How was your experience with it?
The design is Parenthesis good and I am satisfied!
[Included Parts:were they on?
Screws and screw catches for mounting, Sticker, etc.
[Was there anything that disappointed you?
Not particularly
Although the FRP may creak on impact, it can be used without cracking.
View detail
![Traction Pad Street Bike Kit[ICON]](https://global.webike-cdn.net/photo/impression/2f/2fd6bd50c1c3f44d7291e1558728eb98L.jpg)
Good vibes
It was more For Street than the one I used to use.
I don't think Pants will be torn apart.
It's not like a regular Stomp Grip.
At any rate, it feels non-slippery.
I'd be careful putting it up!
View detail
Ideal for hot summer?
This will be a replacement for the OEMScreen from the Racer9GT.
Because of the windproof effect of the OEMScreen, it was not cool in the summer even when wearing the Mesh jacket.
After replacing it with this product, the airflow is now up to the chest area, allowing for a cooler ride.
The product itself is solid and problem-free.
Translation of Instruction Manual (I put it on the appropriate page because there is no description of "Please input here".
View detail
Select Black
Black was selected for the color to match the body.
It looks nice and calm.
It is also useful for handling.
View detail
Exclusive quintessential product
Type to remove and install Tandem grip.
The screw hole in the removed part is used for a tight fit.
It is stable and sturdy even with the Box installed.
View detail
Stable YOSHIMURA
Everyone who rides a motorcycle knows Mr. YOSHIMURA.
I was informed that they finally released Rim sticker and bought it.
It is a little thicker than Mr. MDF and easier to apply.
After removing dirt and degreasing the surface, you can apply the paste one spot at a time.
One point YOSHIMURA for the suspension, it is quite good.
View detail
Fits: DUCATI 1098R, DUCATI 1098, DUCATI 1098, DUCATI MONSTER 1200, DUCATI DIAVEL, DUCATI DIAVEL, DUCATI STREETFIGHTER, DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 1299 Panigale S, DUCATI 1098S, DUCATI 1098S, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1199Panigale, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI MONSTER 1200S, DUCATI MONSTER 1200R
Repurchased.
I repurchased the Nut to replace it along with the Sprocket and Chain exchange.
Material:Since it is Aluminum, I decided to replace it because I knew it would get scratched when replacing the Sprocket. It had faded and I think it was just the right choice.
I think I will replace the Nut in the future when I replace the Sprocket, so I rate the cosmetics as low.
It would be good for a small dress-up of the footwear.
View detail
Fits: DUCATI 1098S, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1098, DUCATI 1098R, DUCATI 1098, DUCATI XDiavel, DUCATI XDiavel, DUCATI STREETFIGHTER, DUCATI STREETFIGHTER S, DUCATI Multistrada 950, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200, DUCATI Multistrada 1200S Granturismo, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200 Enduro
A little dress-up
The rear sprocket, flange, and flange cover had been replaced with CNCRACING ones, but the flange nut was OEM, so the flange nut was replaced as well.
The work was done by a Dealer because I don't have many tools, etc.
Since it is a Flange nut, there is no need to change it unless the Flange is replaced.:Aluminum, so it should be replaced at the time of replacement.
Other products from CNCRACING with Red Anodized paint do not fade mysteriously, but this Nut has been in use for about 6 months and I think it is fading.
It is good for a little dress-up.
View detail
![Traction Pad Street Bike Kit [VOLCANO]](https://img.webike-cdn.net/catalogue/images/103505/55-10-0045C_TS.jpg)
The advantages of Exclusive Design
Exclusive Design is a perfect example of this.
There is also a Universal Type, but the dedicated type is still different.
I can feel the effect of the grips, they don't shift when I grip my knees, and there is no more shifting of my hips when I embrace, etc.
You may notice a little surface blur until you get used to it, but once you get used to it, you won't mind at all.
If you are concerned about the air in the transparent, choose Black because it is more noticeable.
View detail