Reviews
Pleasant bass Sound
Was the one you received as per Image?
It's just like the image!
Was the installation difficult?
It was very easy!
How was your experience with it?
It looks sharper than NORMAL and the bass is more resonant.
[Included Parts:were they on?
Gasket
[Was there anything that disappointed you?
None in particular
View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
Expensive but satisfactory
I feel safer with it on and am happy with the way it looks. View detail
Spring alone is not an obsession.
Bed collar must be prepared, spring compressor is needed to remove the stopper clip, and service manuals are often interpreted as too loose and easy to remove, but it takes a certain amount of tools. View detail
With a little work, it could be installed even with Cowl installed.
Radiator core guard on ZX-6R with no Option setting in OEM
Since it was a new car, we wanted to install it while it was new, so we selected Trickster's product, which was one of the first to offer compatibility with the 24-year model.
I was wondering if it was that large since it arrived from Webike in 120Size. I wondered if it was that big, but it was mostly packing material (laugh).
We believe that the curved RadiatorCore is designed to fit the curved RadiatorCore so that it does not deform due to its easy bending.
Thank you very much.?
The Instruction Manual says to remove the cowl, but I read in a past review that it can be installed without removing the cowl, so I decided to take the challenge.
When I applied it with the packing material still attached, it looked like I could manage without removing the cowl, but the Horn was in the way of hooking the upper three claws to the top of the RadiatorCore, so I removed it, removed the packing material, and installed it without problems.
However, it may be tough to remove and install the Horn and the lower OEM mounting bolt without a tool that can be applied force even in a tight space.
Also, please note that there is still a possibility of scratching the Cowl and Front Fender.
Too bad it doesn't stand out much on Full Cowl cars when installed.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja250, KAWASAKI , KAWASAKI Z650RS, KAWASAKI Ninja400, KAWASAKI Ninja250R, KAWASAKI Ninja400, KAWASAKI ZRX1200DAEG, KAWASAKI Z900RS, KAWASAKI Z1000, KAWASAKI Ninja1000, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
Race ish look and feel
When switching to a 24-model ZX-6R, we decided to install Lever Guard to make it look like a race ish.
After much deliberation over which one to choose, we selected the Trickster one, which also comes with Clutch Side ends.
I thought it would be difficult to remove the screw lock because it was sticky, but it came off easily, and when I looked at it, there was no screw lock applied.
I don't know if this is the kind of Spec. in the 24 year MODEL or if it was a construction error (laughs).
As for the installation of the lever guard, I had prepared it because I read in a review that the throttle would be fixed if the spacer was not installed, but there was no problem with the throttle operation without using the spacer. However, there was no problem with the throttle operation without using Spacer.
Please note that there may be individual differences in this area.
Length adjustment is OEMLever, there is no interference at the shortest position.
Also Quantity:Pair (for Left and Right) to turn off Handlebar does not interfere with Cowl.
Since we are still in the break-in stage and are tied down to 4,000 rpm, we have not noticed much change in the vibration transmitted to the handlebar, but we will re-review if we notice anything after the break-in stage is over and we can rev it to higher rpm.
View detail
Trickstar Slip on For Kawasaki Eliminator
This fits the US spec Kawasaki Eliminator 450! Excellent product and sounds fantastic! Shipping was faster than expected! Great option for the bike! View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
Good shape!
The streamlined shape is very cool, not the common Round Type.
The price is higher but it is a good buy because it reduces direct Damage to Cowl.
View detail
Length of Exhaust System determines
[How is it used?
The sound is neither too large nor too small for my liking, as it is a Japanese Government Approved Exhaust System.
Was the one you received as per Image?
Street Image
Was the installation difficult?
I asked Shop to do this.
How was your experience with it?
I like the way it looks now.
[Included Parts:were they on?
Even better if it comes with a Nut.
View detail
Slip sound but sound quality & appearance Up!
The Exhaust System of the liter SS has a solid OEM one, so there is almost no lightweight effect.
However, the large tubular exhaust system of the 10R lacks a sense of luxury, and it also looks more unrefined than those of other liter SSs.
The Exhaust System here is the solution to this problem.
It also tightens up the look and further raises the 10R's level of luxury.
The sound quality is also slightly sharper and closer to Race ishSound.
And these Exhaust System with Large Residential Demerit
'The Problem of Low-Speed Scuffling' But..
This Exhaust System does not do that.
I also checked with the Manufacturer and it does not appear that the low speed Torque is lowered.
As for the functionality, I can't tell the difference compared to the OEM because I only drive on public roads.
However, I think it is more than worth the purchase, even if only for the dress-up.
There is a wide variety of colors and shapes, so it is best to choose the one that best suits your taste.
View detail
depend on the person
I think the level of satisfaction depends on the person and Style.
In my case, the noise was so loud that I had to switch back to OEM.
If you are a young person, it might be just right.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R
Titanium Ikazuchi ShortFull Exhaust System for Zx25r
22'I put a Titanium RACING Ikazuchi Short Exhaust System on my '22. The sound is pretty good, higher than the Large type and lower and fatter than the Large type when running under 7000 RPM. Above that, it sounds like Sue Parka. Installation was precise, easy, and took less than an hour. The high RPMs seem to be extended because of the improved disengagement. Fuel consumption did not get worse. The exhaust smells bad because there is no catalytic converter, but it's a nice afterfire surface. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900RS
Design that doesn't overstate its case
The matte texture and construction is so good that I think it is a great design that there are so many similar products out there.
The price is acceptable if you consider that it also serves as dress-up parts.
I don't want to feel the effects after installation if at all possible.
Two points that are not directly related to the product, but I was curious about
The first is not difficult to install, but it was in the Instruction Manual. Reference tightening Torque 1 to 1.2 N I was confused for a moment when I saw the statement "I am not sure if you are a PRO or can install it yourself, but I think it is a little confusing...
The second one was a small Sticker of type "Logo" only, and it contained three sheets, but the product photo Quantity:1 Set of 4pcs. I heard that the Black letter Type in the eyes is no longer attached after the anti-discoloration product?
I have written a lot of details about the product, but I really like the product itself!
View detail
Slider for 23 years
We selected it as a Slider that has been on the market for less than six months and is compatible with the product.
The installation itself is not difficult, but since there are several screws with different Hexa diameters, you should make sure that you have a HexaWrench of that size before installation.
I like it very much because it is very close to Cowl's color.
View detail
Easy installation and dress-up effect
Installation should be very easy.
The Instruction Manual was so simple that it was misinterpreted and installed incorrectly, so we had to start over.
It is not usually a place to look closely, but there was a spot where the Core had been crushed after about 1,000 km of driving.
I regret not putting it on sooner.
The screws on the underside of the guard are difficult to reach, so it is better to close the guard with the Glasses than with the Ratchet.
View detail
External Exhaust System
It sounds a bit Large, but looks Cool. View detail
Cooler than it looks in the picture.
I had a hard time deciding between Short, Long, or the Full Exhaust System coming out next month, but I decided to go with Long. It looks cooler than it looks in the picture. I was waiting for a while for the color Black, but then I changed it to Blue because I thought it would be too ugly for my White Nidabo. The result was Large, which was the right choice and very cool. The sound quality is much better than the OEM one, and the volume is smaller than the other products. The Long is said to be a high RPM setting, but I don't feel that the mid and low speeds have been reduced, and I felt that the sudden and sharp Habit of the OEM was suppressed a little. I bought the gasket separately, but it came with the OEM product. View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z250, KAWASAKI Z400
I was right to purchase Large!
The look, Sound, performance, and price point are all great!
The replacement work can be easily done by beginners with no problem, even those who can play with motorcycles to some extent.
It is designed for both 250 and 400, so you can install it on your 250 and use it on your 400, or vice versa.
View detail
Fits: KAWASAKI Ninja ZX-25R
Exhaust System
It can be installed with some tools and knowledge.
When installing the exhaust pipe, I used a little bit of liquid gasket because it was a pain if the gasket fell off.
The sound was not too loud or quiet for me.
View detail
Tightens the atmosphere around the Radiator
The OEMBolt was installed with no problems, it is SMART than the OEMGuard, and the Radiator is more secure in terms of protection. View detail
Perfect Fit feeling
Originally purchased without Emblem, after 7 years, I wanted something different, so I considered and decided to install Emblem.
It's not a surprise, but it's a perfect Fit.
I am very satisfied with the way it looks and the way it fits perfectly.
View detail