Reviews
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
Good shape!
The streamlined shape is very cool, not the common Round Type.
The price is higher but it is a good buy because it reduces direct Damage to Cowl.
View detail
Slider for 23 years
We selected it as a Slider that has been on the market for less than six months and is compatible with the product.
The installation itself is not difficult, but since there are several screws with different Hexa diameters, you should make sure that you have a HexaWrench of that size before installation.
I like it very much because it is very close to Cowl's color.
View detail
Wow that's cool
It was bigger than I expected.
It's best not to fall over, but, well, Large seems sturdy.
To install, simply insert it into the hole and tighten with an 8mm Hexagonal Wrench.
It said to tighten at 40N, but there was only Torque wrench up to 25N, so I may have to check for looseness or something every now and then.
View detail
Slider
I was told that it is better to fix it to the Engine than to attach it to the Frame.
I purchased it. I don't know how well it performs because I haven't mocked it up yet.
Installation is easy (The process of removing Cowl is troublesome.)
I think it looks good Parenthesis well.
View detail
Parenthesis good at best.
It is the quintessential Trickster.
It is also highly accurate and gives a sense of high quality.
I was not comfortable with the cylindrical shape, so I went with this one, but I am satisfied with the Parenthesis and Large.
View detail
Best Look!!
This is the best-looking I've ever seen Material and appearance are very nice Fits perfectly with my bike I love it so much Installation is very easy *Quality check should be improved View detail
TricksterFrame Slider
I love the 3-piece set.
Trickster
Frame Slider、Front Axle Slider、
TricksterLever GuardQuantity:Set Kawasakifor VehicleGreen Light
I am satisfied with Large change
View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Frame Slider
It is easy to install. Repair parts are also available.
Be careful not to order Repair Parts.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
The OEM has folded
When I fell over with the OEM Slider, it snapped and shaved the cowl, so I installed a replacement.
I understand the part about breaking it to release the impact, but I'm afraid of getting my foot caught or injured, so next time I'll get something that's harder to break!
When I was choosing a new product, I had the opportunity to learn about the condition of a fall during a race run with this product, and I felt confident that this would be a good choice.
View detail
I haven't been taken care of yet, and I don't want to be.
[How is it used?
I haven't used it since I installed it.
I don't want to.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It was easy
How was your experience with it?
I haven't installed and used it yet.
[Included Parts:were they on?
I was lucky.
[Was there anything that disappointed you?
The handling instruction manual was a little confusing.
View detail
I like the shape better than the OEM Slider.
[How is it used?
When I got my new car, I decided to go with this one because of its shape compared to the OEM Product, and I installed and used it as soon as possible.
Was the one you received as per Image?
Perfectly as per immersion and I think the Matching with Motorcycle is the best.
Was the installation difficult?
Installation is easy. However, I had to remove the side cowl to get it on, so that took more time.
After fitting the fixing jig and putting the Side cowl back together, it is finally fixed to the jig. At this time, I tighten the jig, Cowl and SliderBody while pushing them in, but it was like floating.
I installed it by tightening the screw while holding it down several times. If you don't notice, the Slider will be installed in the floating state.
How was your experience with it?
I don't know if I've used it yet, as I haven't been able to take the Motorcycle down to see the effect. But it seems to be popping outward slightly more than OEM Product, so I think it is good.
[Included Parts:were they on?
Included Parts:is a jig for fixing, etc., and it was all included.
[Was there anything that disappointed you?
As for the disappointing name, it is slightly disappointing that it floats up with installation.
As Others
It does not come with an Instruction Manual on how to remove the side cowl.
Side cowl is not only to remove the screw, but also to insert and slide, so it is good to work carefully without panic.
View detail
I fell in love with Trickster at first sight.
[How is it used?
Touring
Was the one you received as per Image?
Yes
Was the installation difficult?
it's simple
How was your experience with it?
No problem
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
None
View detail
Looks very durable.
My buddy had an Over Racing Frame Slider and it broke when he crashed, so I went with this one.
Looks durable!
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
Lighter and stronger than OEM
I heard that the OEM Slider breaks easily in a fall, so I bought the Other Brand Product.
Base is iron for OEMs, but this is Material:It is light because it is made of aluminum, but the strength seems to be stronger than the OEM because the proportion of the metal parts is large.
Quality of cutting and painting is also sufficient.
Although it is installation, it is difficult to put in unless you hit it with a plastic hammer etc. because the O-ring of Base is on the edge limit.
There is no detent between the base and slider section, so it is difficult to determine the position of the D/E type.
It is not necessary if the slider is cylindrical, but if it is asymmetrical like D/E type, it would be better to have a detent.
Weight OEM/615g E Type/500g
View detail
Parts you wouldn't want to use if you could!
I put it on for insurance, which I wish was there to protect Cowl from standing moss, etc.
Formally, I'm happy with it because it's not too assertive.
Hopefully we won't be indebted to this Partz.
View detail
High Quality
The only other option available for the latest Ninja 1000SX is a TRICK STAR one.
The BrandImage was negative in my opinion, so I was wondering what to do about it, but I liked the new Slider shape (TYPE-D) and decided to buy it.
This will be the first time I have purchased a product from TRICK STAR.
This is a good impression of the product after it arrived, but the fact that the parts are neatly packaged and lined up carefully after opening the package makes me realize that this is typical for Japan.
I opened the package to check the parts and tentatively assemble them, but I was surprised to see that each of them were tentatively assembled and packed so as not to mis-assemble the different length Bolts and colors.
I've never seen such careful work done on this product Genre, so I was pleased and uplifted to see that the quality of the product looks promising.
In fact, the quality of the product is as expected, the accuracy is high, the surface finish is good, and we have had no problems with the installation.
After I installed it, I thought it was not cool because the Right Side looked like it was protruding too much against the car body, but then I remembered that my buddy Nin1000 had scratches on the Clutch cover even though he had Slider on it when he had a mishap. ” and I was convinced by myself. LOL!
I wasn't able to check if the side cowl can be removed with the Slider attached this time, but I think you will probably have to remove the Slider part only.
I've always shied away from TRICK STAR products due to preconceptions and stereotypes, but now I think this is an opportunity to change my mind.
View detail
I've never been able to help again …
The texture and installation are both good
Since the tightening torque has been specified
It is recommended that you purchase the Torque wrench at the same time
View detail
Expected
I think this is a general Frame Slider I haven't compared it to other products, but I think the texture is quite good .. It was very easy to install without removing the Cowl View detail
very good
It took me about half an hour to install this. The fit is completely original, which is great. In the case of low-speed dumping, it has a certain protective effect on the body, but! Installing this thing will deform the frame in the event of a high-speed crash. As for the installation, it is still not installed... Anyway, I installed it. I wish you all good care of your right hand and happy riding. It took me about half an hour to install this, completely original fit, which is great. In the case of low speed dumping, it has a certain protective effect on the body, but! This stuff is used to deform the frame in the case of a high-speed crash. As for the installation or not, I installed it anyway. I wish you all a good hand and happy ride. translated by Google Translator View detail
Correction of previous imp.
I wrote that it was impossible to install without closing the exterior side of Radiator last time, but as long as the exterior was bent by hand, the installation itself was completed.
Just Quantity : Pair (for Left and Right) As both will remain in contact with the Slider, the use is the accident responsibility.
View detail