Reviews
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
Good shape!
The streamlined shape is very cool, not the common Round Type.
The price is higher but it is a good buy because it reduces direct Damage to Cowl.
View detail
Slider for 23 years
We selected it as a Slider that has been on the market for less than six months and is compatible with the product.
The installation itself is not difficult, but since there are several screws with different Hexa diameters, you should make sure that you have a HexaWrench of that size before installation.
I like it very much because it is very close to Cowl's color.
View detail
Wow that's cool
It was bigger than I expected.
It's best not to fall over, but, well, Large seems sturdy.
To install, simply insert it into the hole and tighten with an 8mm Hexagonal Wrench.
It said to tighten at 40N, but there was only Torque wrench up to 25N, so I may have to check for looseness or something every now and then.
View detail
Fits: KAWASAKI Z1000, KAWASAKI , KAWASAKI ZRX1200DAEG, KAWASAKI ZX-6R
Trickster's Front Axle Slider
I wanted a Simple Front Axle Slider and this was it. I haven't rolled it so I don't know how effective it is, but I also think it looks good while being Simple. I think it's a good product in terms of what kind of atmosphere I want my vehicle to have, and in terms of damage reduction in case of an emergency! View detail
Slider
I was told that it is better to fix it to the Engine than to attach it to the Frame.
I purchased it. I don't know how well it performs because I haven't mocked it up yet.
Installation is easy (The process of removing Cowl is troublesome.)
I think it looks good Parenthesis well.
View detail
Parenthesis good at best.
It is the quintessential Trickster.
It is also highly accurate and gives a sense of high quality.
I was not comfortable with the cylindrical shape, so I went with this one, but I am satisfied with the Parenthesis and Large.
View detail
Best Look!!
This is the best-looking I've ever seen Material and appearance are very nice Fits perfectly with my bike I love it so much Installation is very easy *Quality check should be improved View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-14R, KAWASAKI ZX-6R, KAWASAKI ZZR1400, KAWASAKI ZZR1400
Trickster for Kawasaki cars
Low cost compared to other companies.
I bought these parts because they protected my front fork when I crashed in the Circuit on another vehicle.
I don't want to try it again (laughs).
View detail
It is easy to install.Stand Hook。
It is easy to install. View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-14R, KAWASAKI ZX-6R, KAWASAKI ZZR1400, KAWASAKI ZZR1400
TricksterFront Axle Slider
Slider, the last resort, all put together by Trickster.
A sense of unity - wonderful!
View detail
TricksterFrame Slider
I love the 3-piece set.
Trickster
Frame Slider、Front Axle Slider、
TricksterLever GuardQuantity:Set Kawasakifor VehicleGreen Light
I am satisfied with Large change
View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Frame Slider
It is easy to install. Repair parts are also available.
Be careful not to order Repair Parts.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
The OEM has folded
When I fell over with the OEM Slider, it snapped and shaved the cowl, so I installed a replacement.
I understand the part about breaking it to release the impact, but I'm afraid of getting my foot caught or injured, so next time I'll get something that's harder to break!
When I was choosing a new product, I had the opportunity to learn about the condition of a fall during a race run with this product, and I felt confident that this would be a good choice.
View detail
light
If you don't tighten the screw tightly, you can install it with light rotation. If you are worried about looseness, you can use screw lock. View detail
I haven't been taken care of yet, and I don't want to be.
[How is it used?
I haven't used it since I installed it.
I don't want to.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It was easy
How was your experience with it?
I haven't installed and used it yet.
[Included Parts:were they on?
I was lucky.
[Was there anything that disappointed you?
The handling instruction manual was a little confusing.
View detail
Good.
It is easy to install. I took it down tentatively and it looks good. View detail
I like the shape better than the OEM Slider.
[How is it used?
When I got my new car, I decided to go with this one because of its shape compared to the OEM Product, and I installed and used it as soon as possible.
Was the one you received as per Image?
Perfectly as per immersion and I think the Matching with Motorcycle is the best.
Was the installation difficult?
Installation is easy. However, I had to remove the side cowl to get it on, so that took more time.
After fitting the fixing jig and putting the Side cowl back together, it is finally fixed to the jig. At this time, I tighten the jig, Cowl and SliderBody while pushing them in, but it was like floating.
I installed it by tightening the screw while holding it down several times. If you don't notice, the Slider will be installed in the floating state.
How was your experience with it?
I don't know if I've used it yet, as I haven't been able to take the Motorcycle down to see the effect. But it seems to be popping outward slightly more than OEM Product, so I think it is good.
[Included Parts:were they on?
Included Parts:is a jig for fixing, etc., and it was all included.
[Was there anything that disappointed you?
As for the disappointing name, it is slightly disappointing that it floats up with installation.
As Others
It does not come with an Instruction Manual on how to remove the side cowl.
Side cowl is not only to remove the screw, but also to insert and slide, so it is good to work carefully without panic.
View detail
I fell in love with Trickster at first sight.
[How is it used?
Touring
Was the one you received as per Image?
Yes
Was the installation difficult?
it's simple
How was your experience with it?
No problem
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
None
View detail
Looks very durable.
My buddy had an Over Racing Frame Slider and it broke when he crashed, so I went with this one.
Looks durable!
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
Lighter and stronger than OEM
I heard that the OEM Slider breaks easily in a fall, so I bought the Other Brand Product.
Base is iron for OEMs, but this is Material:It is light because it is made of aluminum, but the strength seems to be stronger than the OEM because the proportion of the metal parts is large.
Quality of cutting and painting is also sufficient.
Although it is installation, it is difficult to put in unless you hit it with a plastic hammer etc. because the O-ring of Base is on the edge limit.
There is no detent between the base and slider section, so it is difficult to determine the position of the D/E type.
It is not necessary if the slider is cylindrical, but if it is asymmetrical like D/E type, it would be better to have a detent.
Weight OEM/615g E Type/500g
View detail