Reviews
techserfu Exhaust Spring
for GPZ900Rtechserfu exhaust pipe.
It has silicon rubber and may be Rust-proof.
The techserfuOEM Product provides a sense of security.
View detail
Exquisite length
When I changed my Wyvern ClassicR Tail Pipe for a change of pace with a UniversalTitaniumium silencer from Yahoo!
I have always used KITACO's Exhaust Spring, but the 70mm length was not available in Size, so it was a great help.
The springs are thicker than those of KITACO, and the quality is solid, as if it were techserfu.
View detail
I'm so glad I was born on earth, where I can easily buy Repair Parts.
[How is it used?
For vehicle inspection purposes.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Very easy.
How was your experience with it?
I could see the effect right away.
[Included Parts:were they on?
Sticker was included.
[Was there anything that disappointed you?
The outer bag was PetitPetit, but no problem.
I had a Large type Baffle.
I was looking for a Small Type Baffle to specialize in vehicle inspections.
Looking around for WeBig's Site ….
Inner silencer was the name of the product.
I thought it was called "End Baffle" or something like that, so I was surprised.
did
And the fact that the shape has remained unchanged for more than 20 years means that SUPERItems has been perfected from the very beginning.
well
The 58.9mm O.D. purchased this time seems to be for Carbon Shell.
There is also one for Titaniumium shell, so you don't want to make a mistake.
I have Φ38 and Φ32, but I have Φ38.
I chose Φ32 this time!
This time, I painted it with Okitsumo's heat-resistant matte black.
I am proud of myself, but I think Parenthesis has improved.
Please read the comments on the photos for more information.
View detail
Fits: HONDA CB1100 SC65
It is installed on the side stand side, so it will fit various kinds of exhaust systems!
[How is it used?
When we replaced the short exhaust system with YOSHIMURA's Short Exhaust System, the center stand stopper was missing, so we needed a new one, which led us to purchase it.
Was the one you received as per Image?
The parts are smaller than the Image, but the thick steel seems to be rigid enough.
Was the installation difficult?
The CenterSTAND was installed with only one screw. The shape is also well thought out.
How was your experience with it?
It was a Just fit on a 2011 CB1100.
I thought the storage position of the Center Stand might shift slightly, but it stops at about the same position as the NORMAL position.
[Included Parts:were they on?
Instruction Manual and Sticker are included.
[Was there anything that disappointed you?
The price is low and we are very satisfied, so we have no complaints.
▼YOSHIMURA's Repair Parts are expensive and difficult to install, so they were passed this time.
Also, some other companies' products that are installed on the body of the Clutch Side may interfere with the Short Tube unless a part of the body is cut.
View detail
Light with a great sound and output
I wasn't able to find a lot of info about Techserfu before ordering, but it was on sale so I gave it a shot. First impressions: obviously, titanium is super light compared to the stock muffler. When starting the bike, you get a low growl. Start riding and keeping it in 3-4K and you still get ZRX bubbling, popping, and small surges. But once you start riding and hit 5-7K the tone tops out and sounds great. Recommendation: I paired it with new jets in carbs, an emissions block-off kit, and had carbs rebuilt and synched. Excellent quality craftsmanship so far and hope it'll be good for the long run. View detail
Highly recommended for Long Type!
[How is it used?
By changing the Silencer OnlyMegaphone of NojimaFull Exhaust System on XJR1300C.
Used for the joint of Silencer and Exhaust pipe.
How was your experience with it?
With the SiliconCover, it's 100mm normally, and probably 110mm when extended, no problem.
I'm pulling quite a bit, but so far it's working fine.
How did it compare to other products?
Anyway, I chose this long Spring with SiliconCover for cosmetic reasons.
One Side is a type that can move its neck freely, and it is a guy who can correspond to the type that the angle of Spring hook is attached.
[Points to note]
Be careful not to pull too hard! It will fly off while you're driving.
View detail
Fits: KAWASAKI ZX-14R
Exhaust System Replacement
It's much lighter and easier to handle.
When I removed the Baffle, the volume became pleasant and fun to run with Large fineness.
I was satisfied.
View detail
Good quality!
I was looking for an exquisite length of 70? and used it on the WR250X Beams exhaust pipe.
It's Stainless and solidly built, with a tightly built hook end, which helps to prevent it from falling out.
View detail
Fits: SUZUKI BANDIT1250 S, SUZUKI BANDIT1250
Sounds good.
I purchased the Polished Titaniumium based on the impressions of others. I didn't know beforehand that I needed an exhaust gasket for the installation and didn't find out until I saw the instruction manual that I had to buy the OEM gasket. It should have been mentioned in the product description if it is required. I gave it a 4 star rating.
I bought the Gasket and installation was accurate and easy. The Gasket is light and stylish. The sound quality is much better than NORMAL when idling. It's not an explosive sound so I'll leave it as it is. There is no sound of AxelOff that other people write. I am satisfied with the exhaust sound which seems to be a liter machine at last.
View detail
It is diverting to another company's exhaust system, but it is useful for Large
The Kawasaki ZR-7 for Other Company Exhaust System Purchased
We use a manufacturer's exhaust system called P's supply I tried to ask for Repair Parts because one of the springs had come off, but The same one was not available because the manufacturer had stopped making them
So, I was looking for an alternative that would fit the Size and this Part came to my attention
It's from the Muffler maker and comes with anti-vibration Silicon and is not too expensive I'm very happy with it
View detail
Fits: SUZUKI Bandit1250, SUZUKI Bandit1250
This is a great product for Center Stand vehicles when replacing the Slip-on Silencer
Bandit 1250 with Slip-on Silencer replacement and Center Stand The implementation remains in person is Recommendation
In the case of Bandit, the Center stand in the OEM Exhaust System Since the stopper is included, you can use it while driving after replacing your favorite exhaust system The Center Stand is noisy, so the noise it makes while driving is much more comfortable
View detail
Fits: KAWASAKI ZX-14R
Essential items for making one out
It's big and heavy. (One Side7?) Removing OEMSilencer and attaching Right Side's Slip-on Silencer. I am worried whether the bundled Bracket has a complicated shape and it can truly fix this lid, but it will be attached properly.
I got it in less than about a week from ordering.
However, this lid is just a little expensive. There is nothing like substitute for Home center. Well it can not be helped.
View detail
Fits: KAWASAKI ZZR1400
Sound quality is also good Large I am strange.
If I change the Exhaust System, I thought that I wanted to make it one-sided, I stamped each Manufacturer's Exhaust System and met this exhaust system. I am using 110 × 480 Silencer with BaffleOff, but it's not a bang, but a heavy bass is comfortable! I feel like the Engine's blowing has improved as well. I feel that it is very light compared to OEM and it also has a role in handling. Sorry a little that Exhaust Gasket is not included! View detail
One Side free and user-friendly!
Muffler silencer is made by other companies but I wanted a 70mm Spring and I bought it.
Because One Side is free, it is a good product regardless of the shape of Hook. Spring strength also has no problems, appearance is also Stainless and good.
View detail
Fits: KAWASAKI ZZR1400
Easily change both solo and dual
【What made you decide the purchase?】 What can be done from the Dual Exhaust System to the solo Exhaust System in a simple way.
【How was it actually used?】 I was worried that the exhaust sound would become louder, but on the contrary it became a little smaller than before and I was beaten. The sound quality was more than I expected.
【Was it difficult to install? (Hard parts case)】 As the photograph attached to the handling Instruction Manual got it, I knew how to put it, but it was hard work lying down next to Motorcycle, so it was hard.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Looking at mounting photos to find places that can be installed without the most stress. Do not force it. To do Torque management.
[Is there anything I was disappointed about?] It was also in the Impre of the other person, but the product is shining in Polished and it stands out.
【Hope for Manufacturer - Please let me know if there are any improvement points; I wish I had a burning color of Stainless Steel from the beginning.
【Have you compared items?】 None.
[Others] I think that the Dual Exhaust System can be easily soloExhaust System, so that it is a good item with User's eyes.
View detail
Fits: KAWASAKI ZX-14R
Easy and effective Large
This is techserfu's Slip-on Silencer. Silencer got lost but chose Φ 100 X 450 L. I thought Balance with the car was the best personally when I installed it. It is useful because the sound can be adjusted with or without Baffle. It is also good at making at affordable price, the effect of weight reduction is absolutely Large.
I think that it is a very good product if there is no commitment to the Full Exhaust System.
View detail
Fits: KAWASAKI ZZR1400
Light and high performance with reduced Cost
Although it is another Manufacturer product that will double the amount of gold if it is a Dual Exhaust System, the idea to Cancellation OEMExhaust pipe one side is White.
Sound quality is a bass bass sound without Baffle It is a comfortable volume like Liter machine.
There was no part inferior to NORMAL in performance of running, and I installed it at the same time as GIpro so it became quite powerful.
I think I did a good shopping.
View detail
Fits: KAWASAKI ZRX1100
High Cost performance
Purchased at 30% Off on Sale.
As a replacement from Slip-on Silencer, Liter machine
Becoming a deep bass sound Sound, it is satisfying Large.
In addition, it was probably because it got lost,
It relaxes considerably and fee Ring got better.
As Minus point, Exhaust pipe - Numbers are assigned to the collecting pipe
There is a problem, but the number of the collecting pipe is wrong, and at the time of installation
I got lost. (I solved the photo by solving it)
View detail
Fits: KAWASAKI Ninja1000
I think this texture by other Manufacturers, and think that this price is very good by weight (about 1.7 km). The description was also intelligible legible and attachment was also easy.
I think this texture by other Manufacturers, and think that this price is very good by weight (about 1.7 km). The description was also intelligible legible and attachment was also easy. View detail
Fits: KAWASAKI ZZR1400
It will be a direction, and it will be a Recommendation if a Slip-on is used. , of course, it is also ZZR1400. The ALL MODEL could also be coped with by the Joint gasket, and attachment was also easy. It is if you dare to s
It will be a direction, and it will be a Recommendation if a Slip-on is used.
, of course, it is also ZZR1400.
The
ALL MODEL could also be coped with by the Joint gasket, and attachment was also easy.
It is if you dare to say an improving point... Or [
that I wanted the color to think that it is not conspicuous ] (sweat)
View detail