Reviews
Quantity:Pair (for Left and Right) Purchased at
Quantity:Pair (for Left and Right) This is a duplicate since it was purchased at the For those who have only seen this one.
I had been using another product, but the non-adjustable moving part came loose and the Mirror started pointing the day after tomorrow while running, so I bought a replacement.
I read the Review before purchasing and eliminated any Spec. that were prone to the same symptoms as the previous one.
Mounting is 17mmQuantity:2pc 14mmQuantity:Easy to prepare 2pcs.
*100 points if there is a 17/14mm thin Combination spanner. It can be installed without it.
The arm section is rounded and can be set quite far back depending on its position, allowing rearward visibility without having to point the arm too far outward.
It was also possible to keep the elbows out of the picture even when the usual seating position is in the front.
It can also be folded up and positioned so that its presence is forgotten, as shown in the photo.
The hang should have the notch facing inward as shown in the photo.
It is perfect if you position it when folded before fixing this area.
The only Neck is OffMirror in general, but vibration at high speeds.
No matter what position I bring it to, it is so scared that I can't see behind it.
If it were 60 km/h on a normal road, it would not be a problem and I would not be concerned, but those who use the highway to travel to the forest roads should be careful.
View detail
Should have bought this first.
I had been using another product, but the non-adjustable moving part came loose and the Mirror started pointing the day after tomorrow while running, so I bought a replacement.
I read the Review before purchasing and eliminated any Spec. that were prone to the same symptoms as the previous one.
Mounting is 17mmQuantity:2pc 14mmQuantity:Easy to prepare 2pcs.
*100 points if there is a 17/14mm thin Combination spanner. It can be installed without it.
The arm section is rounded and can be set quite far back depending on its position, allowing rearward visibility without having to point the arm too far outward.
It was also possible to keep the elbows out of the picture even when the usual seating position is in the front.
It can also be folded up and positioned so that its presence is forgotten, as shown in the photo.
The hang should have the notch facing inward as shown in the photo.
It is perfect if you position it when folded before fixing this area.
The only Neck is OffMirror in general, but vibration at high speeds.
No matter what position I bring it to, it is so scared that I can't see behind it.
If it were 60 km/h on a normal road, it would not be a problem and I would not be concerned, but those who use the highway to travel to the forest roads should be careful.
View detail
Great for people who just need it on.
It is a standard product in the Off-road area!
Tipping over is a common occurrence on forest roads and courses.
If the Mirror is attached to a bracket that also serves as a lever holder, the lever angle will change when the Mirror falls over, and the lever holder will be damaged.
This product can reduce those risks.
And by far the lightest.
As for Demerit, it is hard to check the original function as Mirror = backward
Because the legs are short and have little overhang, and the adjustment range is narrow.
I think it's best to discount the assumption of direct visual inspection in this regard.
I'm just lucky if I can see it.
I'm completely divided in that way, and I basically only drive on forest roads (load transfer and neighborhood forest roads, so there are only a few travel sections). Mirror attached. I bought it just for that!
Quantity:Pair (for Left and Right) There is a distinction between the two, but each can be mounted on either the top or bottom of the Handlebar.
Many people seem to put it on the bottom side, but I put it on the top side.
When I cut the Handlebar, I thought it might hit my Knee, and I also thought that the top one would be more natural for some reason.
Bracket is a split bracket, so it can be installed without removing anything else.
It's super easy with just one Driver!
The price is so cheap that I don't think I'll care if it breaks, but I hear it's hard to break.
Watch." I think this is the one for those who want to focus on factors other than
View detail
Foldable for convenient car loading.
[How is it used?
We purchased the LITTLE CUB in the process of acquiring a long-abandoned LITTLE CUB and performing maintenance&Restore.
Since we often load and move our light van, we needed a mirror that folds up from the base, so we purchased the OR-II Mirror made by Takatsu, which we have always used for our off-road vehicles.
Did you receive the item as per the Image?
As I mentioned above, the product was very familiar to me as I continue to use it on the vehicles I use for mountain play and it was just like the Image.
Was it difficult to install?
If you simply want to install it, you can simply tighten it in, but to make it fold in the desired location, you must fine-tune the various nut-shaped parts at the base, which is less difficult but only slightly more troublesome.
How did you like it?
OR-II Mirror installation in my LITTLE CUB. Offfor VehicleMirror." I had a strong impression that this was a very strange feeling, but I got used to it in a few days.
Above all, the convenience of being able to fold it from the base. Too grateful." Now I like it so much that there is nothing else but this Mirror.
Was "Included Parts:" attached?
Only MirrorBody is not Common For Left/Right Side due to the special shape of the bracket.
Please use caution when purchasing.
Were there any disappointments?
I love the design, the Bracket shape, and the functionality of the product.
Other items that would be helpful
Point and hang of installation
It will be vehicle-matched, but after tightening the base, adjust it so that the folding notch folds to where the owner wants to fold it.
[Availability and clarity of the Instruction Manual
I believe there is a simple installation instruction manual on the back of the package, but I am not sure because I installed it without looking at it.
[Notes]
This product is designed for vehicles with a Mirror Holder of 8mm, so please be careful when purchasing.
The 8mm version does not have an Opposite Thread Screw compatible version. Please note that Yamaha and other recent vehicles have RightMirror with Opposite Thread Screws.
[ITEMS TO BUY TOGETHER
Motorized bicycles have no problem under the traffic law with only Mirror on the Right Side, but to reduce rearward vision, it is also necessary to use the Quantity:Pair (for Left and Right) Use it in the following manner.
[Opinions and requests to Manufacturer
Although the number of vehicles with 8mm Mirror Holder is decreasing, please continue to sell as much as possible for Kawasaki Off-road Motorcycle and SmallEngine Displacement Volume before 2000.
View detail
Foldable for convenient car loading.
[How is it used?
We purchased the LITTLE CUB in the process of acquiring a long-abandoned LITTLE CUB and performing maintenance&Restore.
Since we often load and move our light van, we needed a mirror that folds up from the base, so we purchased the OR-II Mirror made by Takatsu, which we have always used for our off-road vehicles.
Did you receive the item as per the Image?
As I mentioned above, the product was very familiar to me as I continue to use it on the vehicles I use for mountain play and it was just like the Image.
Was it difficult to install?
If you simply want to install it, you can simply tighten it in, but to make it fold in the desired location, you must fine-tune the various nut-shaped parts at the base, which is less difficult but only slightly more troublesome.
How did you like it?
OR-II Mirror installation in my LITTLE CUB. Offfor VehicleMirror." I had a strong impression that this was a very strange feeling, but I got used to it in a few days.
Above all, the convenience of being able to fold it from the base. Too grateful." Now I like it so much that there is nothing else but this Mirror.
Was "Included Parts:" attached?
Only MirrorBody is not Common For Left/Right Side due to the special shape of the bracket.
Please use caution when purchasing.
Were there any disappointments?
I love the design, the Bracket shape, and the functionality of the product.
Other items that would be helpful
Point and hang of installation
It will be vehicle-matched, but after tightening the base, adjust it so that the folding notch folds to where the owner wants to fold it.
[Availability and clarity of the Instruction Manual
I believe there is a simple installation instruction manual on the back of the package, but I am not sure because I installed it without looking at it.
[Notes]
This product is designed for vehicles with a Mirror Holder of 8mm, so please be careful when purchasing.
The 8mm version does not have an Opposite Thread Screw compatible version. Please note that Yamaha and other recent vehicles have RightMirror with Opposite Thread Screws.
[ITEMS TO BUY TOGETHER
Motorized bicycles have no problem under the traffic law with only Mirror on the Right Side, but to reduce rearward vision, it is also necessary to use the Quantity:Pair (for Left and Right) Use it in the following manner.
[Opinions and requests to Manufacturer
Although the number of vehicles with 8mm Mirror Holder is decreasing, please continue to sell as much as possible for Kawasaki Off-road Motorcycle and SmallEngine Displacement Volume before 2000.
View detail
In off-road motorcycle, Mirror should be under the Grip.
The handlebar is also raised so that it does not interfere with the tank. Installation is by QUANTITY:Pair (for Left and Right) Since it is reversed, theQuantity:Recommendation to be purchased by Set. View detail
Eve Smile
This adapter is necessary to install TakacZ?Short mirror on Eve Smile. It cannot be installed without this Adapter. View detail
TAKATSU Trial Mirror
After searching the web, I found Webike offering genuine Honda parts at realistic prices. Excellent service. Wish I'd found them sooner! Webike offer parts for other makes too, at decent prices, so I'll be letting other riders know about them. Decent delivery costs and time from Japan makes a huge difference to keep projects running! View detail
Takatsu mirror
The mirrors are very well constructed and fold right into the perfect spot on the bike. The color of the wire is the perfect blue and the chrome on the mirror really pops with the bike. I have been searching for these mirrors for over a year. Finally found a site that actually had them in stock, so I had to oder them. this has been the best experience I have ever had with a foreign website. I will definitely come back to the site and search for other products not sold in the states. View detail
It can also be used to adjust the height of Mirror.
This product is what is called an Opposite Thread Screw Adapter, but I used it to adjust the height of the Mirror, and the screw is very precise and did not come loose! View detail
This is the one for off-road mirrors.
Bought this to replace the handlebar on my D Tracker 125.
It may take some getting used to. It looks down, so it's hard to see.
There's nothing on the Handlebar, so I'll Refreshing!
I will buy it again when it breaks because it is inexpensive.
View detail
No need to remove Mirror.
Replaced with a collapsible Mirror for driving in the woods. View detail
Please continue to sell for a long time.
[How is it used?
When using the KDX220SR for mountain play The Mirror is resistant to damage in the event of a fall. I purchased this product to change to
Was the one you received as per Image?
I have been using Mirror for many years and the product is as Image.
Was the installation difficult?
It's a bit of a pain to adjust the folded position to your liking, but once you get it right, the rest is easy, so it's a process that can't be helped.
How was your experience with it?
In my case, after purchasing and using other companies' products, I settled on this product in consideration of the blur caused by rearward confirmation and vibration, etc. I have been using it for many years in various types of cars, so in a sense, I am very happy with it. "Reliable feeling" There are things like.
If you adjust the folding position as described above, you can easily fold it to your desired position anytime you want.
[Included Parts:were they on?
It is a product that integrates things related to Mirror.
Quantity:Pair (for Left and Right) Sold separately. "for Right Side." "for Left Side." This is an Exclusive Design, so make no mistake when purchasing.
[Was there anything that disappointed you?
I have absolutely no complaints about the product itself.
0Other items that may be useful include
Point and hang of installation
Adjust the notch for folding to the Position you want to collapse as written above.
[Availability and clarity of the Instruction Manual
There is something written on the back of the Package, but I have never read it.
[Notes]
This is not Communal to Left/RightDesign, so make sure you get it right when you buy.
[ITEMS TO BUY TOGETHER
Quantity:Pair (for Left and Right) It's better to buy it at...
[Opinions and requests to Manufacturer
I ordered it from Webike and I got the For Right Side. I don't know when it's coming in. This was the case.
I was able to purchase it at a Motorcycle supply store in the prefecture. "Stock clearance." Are they going to stop manufacturing?
View detail
SLICK AND MINIMALIST
Easy to use and easy to install. Durable material and high quality mirror. Slick looking mirror and looking great with supermoto road legal View detail
Psycho ー
I bought this for the forest road, Parenthesis is good. View detail
Psycho ー
I bought this for the forest road, Parenthesis is good. View detail
It's a very easy to use Mirror if you think about it Total.
[How is it used?
I bought this with my new purchase of a Mountain Games Motorcycle.
How was your experience with it?
I thought that I would transplant the Mirror which was installed in the vehicle which was sold along with the replacement of the vehicle, but... because the Mirror Holder of the vehicle which was introduced this time was 8mm Spec. I have to buy again.
How did it compare to other products?
There is also a Mirror that folds up easier than this product, and it is also made by Takatsu. "Trial mirror." There are also Compact Mirrors, such as "Vibration countermeasures" "Easy to fold." "No interference when standing." etc.Total makes this product the best for me.
[Points to note]
During installation, the Mirror root "The notch." to the direction you want to fold the Quantity:You have to set it, which is quite a tedious task.
The next step is to adjust the Mirror Bracket so that it moves with the hardness that you like.
0Other items that may be useful include
【Included Parts:presence or absence】.
This is only one bottle as per the Package in the image.
Depending on the vehicle, the Right Side Mirror may have a Normal Thread Screw or an Opposite Thread Screw, so be sure to check your vehicle before purchasing.
[ITEMS TO BUY TOGETHER
Not particularly
[Opinions and requests to Manufacturer
The number of Dual Par Pass cars made by Japanese manufacturers is decreasing, but please keep making them as long as possible.
View detail
It goes well with Off-road motorcycle.
[How is it used?
I installed it on my D Tracker 125.
Was the installation difficult?
Just plug it into the OEMMirror hall.
Screw diameter is 10mm or not, Opposite Thread Screw or not, that's all you need to pay attention.
How was your experience with it?
I am pleased with the look and function of this product.
The OEM Mirror was quite large and hard to slip through, but after switching to this Mirror, it became easier to slip through.
Complaints.
It's only when I put it on my D Tracker 125, but I can't see directly behind it.
Your own arm will be reflected in the image, which limits the area you can see.
If you are worried about that, you can buy OffsetHolder from Tanax with it.
https://www.webike.net/sd/21446326/
View detail
It is recommended if you want a light bar-end mirror and a product that does not fold in the wind.
At first, I used a bar-end mirror of CNC racing, and I chose this product more recently after writing several things because it was folded in the wind. Typical installation took about 10 minutes The advantage is that the mirror and the bar end are fixed, so they do not bend or fold while running. And it's light. First of all, I took the picture at night, but the bike seems lighter. View detail
MOTARD's classic Trial mirror!
The Mirror comes under the Handlebar, so now it has a Refreshing look!
Some might say the vibration makes it hard to see.
I'm an absolute visual person, so I don't mind seeing the Large body!
As for the installation, it's just a matter of inserting the Handlebar, so anyone can install it.
View detail