Reviews
Quantity:Pair (for Left and Right) Purchased at
Quantity:Pair (for Left and Right) This is a duplicate since it was purchased at the For those who have only seen this one.
I had been using another product, but the non-adjustable moving part came loose and the Mirror started pointing the day after tomorrow while running, so I bought a replacement.
I read the Review before purchasing and eliminated any Spec. that were prone to the same symptoms as the previous one.
Mounting is 17mmQuantity:2pc 14mmQuantity:Easy to prepare 2pcs.
*100 points if there is a 17/14mm thin Combination spanner. It can be installed without it.
The arm section is rounded and can be set quite far back depending on its position, allowing rearward visibility without having to point the arm too far outward.
It was also possible to keep the elbows out of the picture even when the usual seating position is in the front.
It can also be folded up and positioned so that its presence is forgotten, as shown in the photo.
The hang should have the notch facing inward as shown in the photo.
It is perfect if you position it when folded before fixing this area.
The only Neck is OffMirror in general, but vibration at high speeds.
No matter what position I bring it to, it is so scared that I can't see behind it.
If it were 60 km/h on a normal road, it would not be a problem and I would not be concerned, but those who use the highway to travel to the forest roads should be careful.
View detail
Should have bought this first.
I had been using another product, but the non-adjustable moving part came loose and the Mirror started pointing the day after tomorrow while running, so I bought a replacement.
I read the Review before purchasing and eliminated any Spec. that were prone to the same symptoms as the previous one.
Mounting is 17mmQuantity:2pc 14mmQuantity:Easy to prepare 2pcs.
*100 points if there is a 17/14mm thin Combination spanner. It can be installed without it.
The arm section is rounded and can be set quite far back depending on its position, allowing rearward visibility without having to point the arm too far outward.
It was also possible to keep the elbows out of the picture even when the usual seating position is in the front.
It can also be folded up and positioned so that its presence is forgotten, as shown in the photo.
The hang should have the notch facing inward as shown in the photo.
It is perfect if you position it when folded before fixing this area.
The only Neck is OffMirror in general, but vibration at high speeds.
No matter what position I bring it to, it is so scared that I can't see behind it.
If it were 60 km/h on a normal road, it would not be a problem and I would not be concerned, but those who use the highway to travel to the forest roads should be careful.
View detail
Great for people who just need it on.
It is a standard product in the Off-road area!
Tipping over is a common occurrence on forest roads and courses.
If the Mirror is attached to a bracket that also serves as a lever holder, the lever angle will change when the Mirror falls over, and the lever holder will be damaged.
This product can reduce those risks.
And by far the lightest.
As for Demerit, it is hard to check the original function as Mirror = backward
Because the legs are short and have little overhang, and the adjustment range is narrow.
I think it's best to discount the assumption of direct visual inspection in this regard.
I'm just lucky if I can see it.
I'm completely divided in that way, and I basically only drive on forest roads (load transfer and neighborhood forest roads, so there are only a few travel sections). Mirror attached. I bought it just for that!
Quantity:Pair (for Left and Right) There is a distinction between the two, but each can be mounted on either the top or bottom of the Handlebar.
Many people seem to put it on the bottom side, but I put it on the top side.
When I cut the Handlebar, I thought it might hit my Knee, and I also thought that the top one would be more natural for some reason.
Bracket is a split bracket, so it can be installed without removing anything else.
It's super easy with just one Driver!
The price is so cheap that I don't think I'll care if it breaks, but I hear it's hard to break.
Watch." I think this is the one for those who want to focus on factors other than
View detail
Well, okay.
Used for square-grained CUB No. 90Custom
We wanted something that would not extend too far beyond the width of the handlebar, but still allow for fine adjustment front to back.
In the CUB, the handlebar switches and Mirror are integrated into one unit, so if the Brake lever position is set to the upper side, the Mirror will be tilted too far toward the front. Am I the only one who thinks that the lever of the CUB is too far downward, and that Mr. Honda should do something about it?
Thanks to this, Mirror fits in a good position.
The Mirror diameter is a little small, but I didn't mind.
Installation is a bit of a hassle with all the Nut.
Let's do our best while looking at the instruction manual.
For the time being, a rubber cover is attached, but the hole and the arm are not very tightly sealed, so the waterproof property may not be good.
View detail
for Off-Road.
I bought this because I go to the woods with my CT110 HUNTER CUB. it has an off-road look and looks good.
However, it was difficult to adjust the firmness and sometimes moved due to wind pressure.
After several adjustments, we finally settled on a good firmness.
I would have preferred the black bars to the plating, but I am generally satisfied with the product.
View detail
Foldable for convenient car loading.
[How is it used?
We purchased the LITTLE CUB in the process of acquiring a long-abandoned LITTLE CUB and performing maintenance&Restore.
Since we often load and move our light van, we needed a mirror that folds up from the base, so we purchased the OR-II Mirror made by Takatsu, which we have always used for our off-road vehicles.
Did you receive the item as per the Image?
As I mentioned above, the product was very familiar to me as I continue to use it on the vehicles I use for mountain play and it was just like the Image.
Was it difficult to install?
If you simply want to install it, you can simply tighten it in, but to make it fold in the desired location, you must fine-tune the various nut-shaped parts at the base, which is less difficult but only slightly more troublesome.
How did you like it?
OR-II Mirror installation in my LITTLE CUB. Offfor VehicleMirror." I had a strong impression that this was a very strange feeling, but I got used to it in a few days.
Above all, the convenience of being able to fold it from the base. Too grateful." Now I like it so much that there is nothing else but this Mirror.
Was "Included Parts:" attached?
Only MirrorBody is not Common For Left/Right Side due to the special shape of the bracket.
Please use caution when purchasing.
Were there any disappointments?
I love the design, the Bracket shape, and the functionality of the product.
Other items that would be helpful
Point and hang of installation
It will be vehicle-matched, but after tightening the base, adjust it so that the folding notch folds to where the owner wants to fold it.
[Availability and clarity of the Instruction Manual
I believe there is a simple installation instruction manual on the back of the package, but I am not sure because I installed it without looking at it.
[Notes]
This product is designed for vehicles with a Mirror Holder of 8mm, so please be careful when purchasing.
The 8mm version does not have an Opposite Thread Screw compatible version. Please note that Yamaha and other recent vehicles have RightMirror with Opposite Thread Screws.
[ITEMS TO BUY TOGETHER
Motorized bicycles have no problem under the traffic law with only Mirror on the Right Side, but to reduce rearward vision, it is also necessary to use the Quantity:Pair (for Left and Right) Use it in the following manner.
[Opinions and requests to Manufacturer
Although the number of vehicles with 8mm Mirror Holder is decreasing, please continue to sell as much as possible for Kawasaki Off-road Motorcycle and SmallEngine Displacement Volume before 2000.
View detail
Foldable for convenient car loading.
[How is it used?
We purchased the LITTLE CUB in the process of acquiring a long-abandoned LITTLE CUB and performing maintenance&Restore.
Since we often load and move our light van, we needed a mirror that folds up from the base, so we purchased the OR-II Mirror made by Takatsu, which we have always used for our off-road vehicles.
Did you receive the item as per the Image?
As I mentioned above, the product was very familiar to me as I continue to use it on the vehicles I use for mountain play and it was just like the Image.
Was it difficult to install?
If you simply want to install it, you can simply tighten it in, but to make it fold in the desired location, you must fine-tune the various nut-shaped parts at the base, which is less difficult but only slightly more troublesome.
How did you like it?
OR-II Mirror installation in my LITTLE CUB. Offfor VehicleMirror." I had a strong impression that this was a very strange feeling, but I got used to it in a few days.
Above all, the convenience of being able to fold it from the base. Too grateful." Now I like it so much that there is nothing else but this Mirror.
Was "Included Parts:" attached?
Only MirrorBody is not Common For Left/Right Side due to the special shape of the bracket.
Please use caution when purchasing.
Were there any disappointments?
I love the design, the Bracket shape, and the functionality of the product.
Other items that would be helpful
Point and hang of installation
It will be vehicle-matched, but after tightening the base, adjust it so that the folding notch folds to where the owner wants to fold it.
[Availability and clarity of the Instruction Manual
I believe there is a simple installation instruction manual on the back of the package, but I am not sure because I installed it without looking at it.
[Notes]
This product is designed for vehicles with a Mirror Holder of 8mm, so please be careful when purchasing.
The 8mm version does not have an Opposite Thread Screw compatible version. Please note that Yamaha and other recent vehicles have RightMirror with Opposite Thread Screws.
[ITEMS TO BUY TOGETHER
Motorized bicycles have no problem under the traffic law with only Mirror on the Right Side, but to reduce rearward vision, it is also necessary to use the Quantity:Pair (for Left and Right) Use it in the following manner.
[Opinions and requests to Manufacturer
Although the number of vehicles with 8mm Mirror Holder is decreasing, please continue to sell as much as possible for Kawasaki Off-road Motorcycle and SmallEngine Displacement Volume before 2000.
View detail
Off-road look and feel
First of all, the folding and Mirror fixing parts had to be retightened firmly before use, or else it would be lubricated. In particular, the Mirror fixing must be tightened very firmly, or it would move in the wind while running. The folding section needs to be tightened properly after applying grease, and the degree of tightening is rather delicate, so at first I had to retighten it several times before I found the right degree.
Mirror is easy to see without blurring due to vibration, but folding is positioned and a little troublesome to adjust to it...Mirror Bracket, which is Offset to prevent arms from hitting in Standing, has a strange curved design, partly because of this, The Mirror Bracket has an odd curved design, which is also the reason why it folds up so easily. "Heh I think that the "U" shape is a little bit bad for parenthesis....
Folding is somewhat troublesome, so there may be more situations where I end up running without folding Mirror................;
View detail
Mirror, the standard for off-car customization
[How is it used?
Installed on Yamaha's WR155R.
Handlebar is ZETA CX Handlebar MX-412.
Was the one you received as per Image?
The product is exactly as shown in the picture.
The caveat is that theQuantity:Pair (for Left and Right) That is, there is a setting in the the same orientation Quantity by mistake.:2pc. Don't buy Set!
Was the installation difficult?
Simply attach with a Phillips Screwdriver.
How was your experience with it?
It's the standard OffMotorcycle reverse mount. Is it easy to see? If you ask me, I will say NO!
That said, it is one of the easier-to-read Mirrors of this type. The price is also good because it is so inexpensive.
It is not very useful when driving as it shakes quite a bit, but it is better than nothing!
[Included Parts:were they on?
None
[Was there anything that disappointed you?
To be blubbering!
It can't be helped!
View detail
This is the only choice for driving on forest roads
The Mirror's foldable design is convenient for driving on narrow forest roads or loading a transporter, but this is the same as other foldable Mirror models. If the Mirror is broken, you have to buy a new one, including the bracket. I would be very grateful if you could sell only Mirror....
Installation is easy with a single 14mm Spanner, but requires some familiarity as two 17mm Spanners are used to adjust the retractable part. The shaking is hardly noticeable.
View detail
When it comes to off-road motorcycles, this is the one.
Merit
It improves the appearance of the product in a special way.
Breakage rix will increase if it is inside the Guard on forest roads, as it eliminates the danger of hitting the arm in the event of a fall when driving on forest roads, etc.
Demerit
The Mirror section is blurred by vibration when running due to the absence or weakness of gold in the core, making it difficult to see.
Note that the Mirror cannot be adjusted while the OEMetc. is running, as it is a type that tightens the Clamp and angle adjustment at the same time.
Recommendation
Forest Road Rider should be changed from Risk of falls and injuries.
Appearance is a preference.
View detail
In off-road motorcycle, Mirror should be under the Grip.
The handlebar is also raised so that it does not interfere with the tank. Installation is by QUANTITY:Pair (for Left and Right) Since it is reversed, theQuantity:Recommendation to be purchased by Set. View detail
I didn't have Mirror, so I bought it anyway!
[How is it used?
The Motorcycle I bought did not have Mirror, so I bought it anyway.
Was the one you received as per Image?
It is a common ZedTwoMirror.
Was the installation difficult?
When I installed it in a Yamaha car, I used an Adapter of the same Brand, but the Pitch did not match. It was my lack of knowledge.
How was your experience with it?
It was a little long for my Motorcycle, but I am able to use it as normal.
The mirror surface is a moving Type.
[Included Parts:were they on?
Mirror only.
View detail
Since control is strengthened these days, they are items to attach very much. They are goods best to Ho of an idea as it is heavy and handling is affected by the usual mirror. Although the comment at the time of use do not look almost, please thin
Since control is strengthened these days, they are items to attach very much.
They are goods best to Ho of an idea as it is heavy and handling is affected by the usual mirror.
Although the comment at the time of use do not look almost, please think that it is better than nothing.
It is said that nothing will be said if control also attaches even this mirror, and attached.
I think that it can use since it may be visible although it is the structure which can be regarded also as a dummy.
View detail
It attached to SEROW250. The retractable type was chosen according to the situation in the damage prevention at the time of a fall, or a garage. It compares pure and the point in which delicate adjustment is possible is pleasing.
It attached to SEROW250.
The retractable type was chosen according to the situation in the damage prevention at the time of a fall, or a garage.
It compares pure and the point in which delicate adjustment is possible is pleasing.
View detail
Depending on the case where it blurs in vibration and back cannot be seen during a run, the mirror is also suitable for the wrong directions... If it is right and becomes hollow better, without folding, it will break with a snap from a root.
Depending on the case where it blurs in vibration and back cannot be seen during a run, the mirror is also suitable for the wrong directions... If it is right and becomes hollow better, without folding, it will break with a snap from a root. View detail
wonderfulness -- it became hollow and broke. During a run, a mirror blurs, and although visibility is bad, when important, the joint part of a ball form is not helpful and it cannot recommend at all. It swore to buy no article of this manufacturer
wonderfulness -- it became hollow and broke.
During a run, a mirror blurs, and although visibility is bad, when important, the joint part of a ball form is not helpful and it cannot recommend at all.
It swore to buy no article of this manufacturer from now on.
View detail
TAKATSU Trial Mirror
After searching the web, I found Webike offering genuine Honda parts at realistic prices. Excellent service. Wish I'd found them sooner! Webike offer parts for other makes too, at decent prices, so I'll be letting other riders know about them. Decent delivery costs and time from Japan makes a huge difference to keep projects running! View detail
Takatsu mirror
The mirrors are very well constructed and fold right into the perfect spot on the bike. The color of the wire is the perfect blue and the chrome on the mirror really pops with the bike. I have been searching for these mirrors for over a year. Finally found a site that actually had them in stock, so I had to oder them. this has been the best experience I have ever had with a foreign website. I will definitely come back to the site and search for other products not sold in the states. View detail
Although the size is small, a wide field of view can be seen.
Installation is easy as it is just a wrap around, but you need to think about it yourself and put it where it will be fixed while driving.
Although the Mirror area is Small again, it certainly looks wider because of the wide angle.
It looks cool, like a pops that fits in the past.
View detail