Reviews
Price is high but desire to own is satisfied
If you ignore the price, it's great.
However, the Risk of theft is now clearly higher when you are out and about etc.
5,900 yen for a mere ArmParts
Texture is the best
It also satisfies the desire for ownership.
Anyway, it's expensive.
I'm ordering from Manufacturer, but I don't mind if it's sold separately, so I can get a Screw with anti-theft measures later.
I wish they would release it.
I changed to Screw Tightening with Hexagonal Wrench
View detail
Quality is top notch
If you ignore the price, I don't think you can find a better quality ClampBase than this one.
It satisfies my desire to own one.
View detail
Very good
Delivery was fast, and the product was great. I would like to recommend it to everyone. Very good. Highly recommended. . View detail
Vibration Isolation Outclassing
A little soft, but firm and very good.
We will make it a good companion for future Touring.
View detail
Smartphone Holder
I use an iPhone 12 and it is Exactly very easy to use View detail
SIGN HOUSE
Good to adjust to the Size of the phone. View detail
SIGN HOUSE
My previous Smartphone Holder was only slightly adjustable, but this one is great because I can adjust it to an angle I can easily see! View detail
SIGN HOUSE
Good texture and adjustable to an angle that is easy for me to see. View detail
SIGN HOUSE
I don't know as it has only been installed for a short time. View detail
Fits: Others H4 Valve,HS1Valve DC12V lighting Minus common car
Like others, I can't get High beam in 6 months.
The company's HID (55w) and a fan of Halogen for many years. In that vein, I purchased the company's LEDs, which are more expensive but have higher Quality and self-satisfaction
Installation.
Note that the screw for attaching the heat sink of the ribbon is small and easily licked.
Ribbon is deformable to some extent, so if the volume is contained, it will be contained.
Controller and Ribbon are quite Large.
Wiring is thick and does not bend tight.
when using
For brightness, Kelvin is terrifically satisfied.
High beam is about 6 months old, and then it stops lighting up.
Low beam also disappeared after about 200 hours total!
I'm an amateur so I don't know what broke, but it's disappointing because I was hoping for a more durable life than HIDs.
View detail
The quality is good, but a bit expensive.
I have been using a SYGN HOUSE mounting system for over 10 years now. I am thinking of replacing it when it breaks, but it does not break easily. It is not a part that is always in operation, does not interfere with other parts, and does not rust or get scratches. It is quite sturdy. Currently, I have installed this on both VINO and XJR1300, and am replacing the top part from B Parts. (Smartphone Holder is already installed on the Others separately.)
However, you can get a Smartphone Holder at a reasonable price at each SiteShop, so there may be no need to choose this product, but just to give you an idea of the advantages of this product, we recommend the following
・Luxury texture
High durability
Scalable with a combination of Base, Arm, and Holder
I think that is what this means.
By the way, for my own use, I use Panasonic's GORILLA. A-14 PNDWaterproof I put it in a transparent Case called "Transparent Case" and installed it in the Handlebar. Unfortunately, this transparent Case seems to have been dropped from SYGN HOUSE's LineUp. I have been using this method since the days of the mobile phone, but now I check the running Route exclusively with the phone attached to the Holder, so this one is mainly for checking the overall map and listening to music. (The surface of the Vinyl case can be operated through the leather gloves & through the case)
I think it is a recommendation for those who want to get satisfaction from the quality of the product. However, it is rather expensive if you have all the ABC parts.
View detail
Perfect for long distance touring!
I occasionally go camping touring on my Ninja 250SL for long distance trips of about 500 km each way and overnight stays.
I bought this because I want to charge my iPad mini, my phone, Mobile Batteryetc.… and many other things that I bring with me.
Frankly, the price is high, but the build quality is ◎!
Week Point is that the Connector part is a little easy to pull out, and the price is too high!
Overall, it's a RECOMMENDATION!!!
View detail
Quantity:2pc. Set eye
I purchased this product in conjunction with the purchase of SecondMotorcycle.
I had used them in the past, so I knew they would hold my phone well and the quality of the product, so I decided to purchase it, although the price was high.
The difference from the one we purchased a few years ago was very slight:the rubber sheet was applied from the beginning, whereas before we had to apply it ourselves.
I feel the sensation of pulling the Screw of the claw that holds the phone is lighter. All of these are very slight.
The price is high, but if you consider the possibility of dropping your phone, it may seem cheap. I was embarrassed to stand on it before, but my phone did not move an inch and was not damaged. The peace of mind is worth the price.
It would be nice if the range of phones that can be attached could be expanded a little more, as the sturdy construction makes it impossible to attach a slightly Larger phone.
View detail
Looks like it's new.
I purchased and used it several years ago. I purchased a new one this time because I purchased SecondMotorcycle.
There were Long, Semi-long, and Short, but I bought the Semi-long.
The difference from the previous version is that the head of the bolt is now triangular instead of polygonal. The triangular head is easier to turn, and can be turned with gloves on.
It is well made
The price is high, but considering the possibility of losing the phone while driving and replacing it due to deterioration, etc., I think it is worth buying.
View detail
Fits: KAWASAKI NINJA1000 (Z1000SX), KAWASAKI 1400GTR
Installed in 2023 MODEL zx6r
Used with gopro to shoot Circuit running video.
Since the mount is a RAM Mount, the size of the ball section is
I was worried because it was a little different.
I was able to use it without any problems.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, SUZUKI GSX1300R Hayabusa, KAWASAKI ZX-6R Ninja, KAWASAKI ZX-10R Ninja, HONDA CBR600RR, HONDA CBR1000RR, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R3
Precious H7LED
I think this product is of interest to my brothers and sisters whose headlights are H7 models.
There are few products, especially those that are sealed-compatible.
Considering Waterproof and heat dissipation, we arrived at this product.
Space behind the Light was more necessary than imagined, and the Control Unit was heavy and of a reasonable size.
The V-strom650 had plenty of room in terms of Space, and there is a solid Bracket behind the Cowl, so there is no problem.
It was fine until I wrapped the double-sided tape around the edge of the light case and attached the WaterproofBoots.
When attaching the Heat Dissipating Ribbon to the Valve unit to hold the Valve in place, the
Since the valve unit is compact, the part that comes out of the boot is short, and it is necessary to screw it in while crushing the boot, which gives the impression of a forced installation.
I am not sure how it will affect the headlight unit side, but since the Image is pulling the Valve all the way outward, there is a possibility that the optical axis adjustment mechanism, etc. will be stressed.
Also, a heat transfer grease is required between the Valve unit and the Ribbon, but is included.
Since it is outside of the Waterproof part, there is a concern that the car models that get wet directly with rainwater etc. will flow.
I also saw a NetReview that said the lifespan is 2 years, so that may be part of the reason.
Ribbon generates quite a bit of heat, so it is a proof of heat dissipationLeft, and stable heat dissipation can be expected.
However, depending on the car model, there is a possibility of deterioration or deformation of resin parts in contact with the ribbon, so it may be necessary to adjust the shape of the ribbon so that it does not come in contact with the ribbon.
The brightness is brighter than Halogen, but not dramatically so.
Cutline looks no different than OEMHalogen, but I think optical axis adjustment is necessary.
I was so swamped with optical axis adjustment that I couldn't quite figure it out.
I don't know how many times I have removed Cowl….
There are products that can be installed inside the waterproof cap, such as H7 and more compact products.
Compared to such products, the advantage is the good heat dissipation by Ribbon.
Long-distance travelers can expect stable brightness in terms of heat dissipation.
I think it is a good idea for a product, but there are various problems and I think there are only a few car models that can be installed without Stress.
View detail
It's not working
I bought it because I was worried about the phone malfunctioning, but it is obviously too soft and I think it shakes a lot while driving.
In my case, I did not install it because it is located close to the tank and it might shake and hit the tank.
It was too expensive to purchase as it was not usable.
View detail
Best Features
It is very Universal and can be positioned freely.
Circuit also holds the Time measurement device well.
View detail
More &hellip. than I imagined;
I was hoping that it would be an anti-vibration solution from the 1200ccLTWINEngine, and it must be effective because it was sold out for a while at Motorcycle supply stores. When I actually used it, I felt that the rubber hardness was too soft. I think it would be better to reduce the amount of deformation of the rubber a little more. View detail
Design and quality are good but squishy
I think Vibration is effective, but it is too Kunikunashi and very cumbersome to install and remove the phone. View detail