Reviews
Wouldn't this be the perfect maintenanceSTAND for Middle motorcycle!
I am satisfied with the stability of the vehicle when using the rear stand, the lightness when lifting up, and the price. I was thinking of replacing the tires by myself in the future, and I am also hoping to expand the range of maintenance of other parts. (The Z650RS weighs 188kg *Rear Carrier would be better) It only requires a little weight by hand. It is very convenient because I used to do one side lift up with a piece of wood.
Comparisons were made with Company S, Company A, and Company J. As a result, we decided on DAYTONA. As the reason for the selection, I considered that the structure of the most load-bearing part is Square Type, which seems to be sturdy, and that it is superior in terms of comparative cost. Also, the fact that the product introduction image is of RS was a deciding factor. The other 3 companies are all sold separately, and S and A are a little cheaper than DAYTONA, but there were some comments that the stability of the frame is not so good. I have not actually used them, so I am not sure.
The Stand Hook holder is specified to have a diameter of 14 to 18mm. If the diameter is larger than this, it will not fit in the attachment. Also, it takes a little getting used to inserting the Attachment.
The only drawback is that the latch of the U-shaped attachment is too thin and I am not sure if it is durable. I am not sure if it is durable or not. I don't know because I haven't used it yet. However, spare parts are available, so there is no need to worry. (This is not a problem for those who can weld.)
J company claimed that the handlebar should be set to "Left" and "Up" when the brake is "STAND-UP", while DAYTONA company claimed that the handlebar should be set to "Straight". I am not sure of the difference, but I found that the fixation of the hook of the front brake at the time of OthersLift up was the same in all companies. I hope this is of some help.
View detail
It is strong and secure.
This type of product is unstable and dangerous unless it is strong and well made.
The price is high, but the results are inexpensive because the work can be done with peace of mind.
Strange Chinese products are dangerous and expensive if something goes wrong.
View detail
Fits: Others , DUCATI SPORT1000, DUCATI PAUL SMART1000LE, YAMAHA V-MAX 1680
It is indeed a Jtrip.
I used it on my car MOTO GUZZIV11. I bought the Wide one because I thought I could not use it with the NORMAL one. I was nervous at first because it was my first time to use it, but once I put the hang on, it was easy. I used to use Astro's one, but it costs about 3 times as much, so I am satisfied with the high quality at a reasonable price. View detail
It goes up very lightly.
We are z900RS.
I had wanted a maintenance stand for a long time, but I also thought that a center stand would be fine, but I wanted to install a YOSHIMURAHand Bent, so I gave up on the center stand and decided on the maintenance stand.
Impressively, I was surprised at how lightly it went up.
Probably light enough to be raised by a Small school age girl. I was surprised.
As I have written elsewhere for those who use YOSHIMURA, please use a bracket with the opposite shape of a normal bracket for the old-fashioned YOSHIMURAHand Bent, since a normal bracket will scratch it.
What is the opposite of normal, on the Maintenance Stand side, [Ts] You can install a Bracket like the one shown below, but you can also use the Material:Plastic round shape circular fixtures.
[Ts] Brackets like the one shown below are brackets that can be attached to the body of the vehicle.
I have always wondered if there might be a reason why only YOSHIMURAHand Bent's Exhaust System is parallel to the ground.
It's still different, isn't it? It's originally for re−sing!
View detail
Easy to use
I purchased this for Chain Maintenance and recommend it for vehicles without a Center Stand. View detail
Helpful Rubber and Quantity:Set
Helpful Rubber and Quantity:I used it in a Set and was able to Lift up in one shot even though it was my first time.
I feel that it is expensive and well made.
I was surprised that the shipping box was quite Large.
View detail
It is used in the maintenance of MONKEY125.
Easy-to-use Size feel.
Besides maintenance, it is cool just to hang STAND on the wall when storing, etc.
It is used in conjunction with a Stand Hook that attaches to the base of the Rear Shock.
View detail
For Maintenance
Light weight, good appearance
It's a good product
I was not sure about JTrip, but I am glad I chose this product.
View detail
This is the Sokojikara of JAPAN!
I bought this for my VSTROM250SX.
Since this Motorcycle is almost a Jig Sur, STAND for Road is suitable for it.
I have a thing for OFF, but I could not use it at all for this Motorcycle.
And it took me a bit of time to use it because I have only used the kind that lifts from the belly for OFF, but, well, I think I can handle it.
And one more thing, I need an Option nail for this STAND, but I'm yuuuugggee! "V-receiver, 2." I was not sure what it was for. I didn't really know what it was for, but I thought, "This is it for now, right? It seems to be usable for now. However, it does not seem to be the ideal shape for motorcycles.
It was relatively easy to hang, but I had more fear when it came time to take it down.
At least you have to get used to it, but you will probably only use it for Chain adjustment, so the Chance may be small! (^。^) y-. O-
View detail
Great tool with adjustable height.
Used on 2023 Honda Rebel 1100 - The quality of itself is metal pretty sturdy, very easy to assemble, I know some tools out there require to modify the jack to fit Rebel 1100 but this one needs none, the only thing you’ll need it turn both screws knob face front when you assemble it, if it’s on the wrong direction it’ll short about 1” to capture the frame. Overall is a great tool and affordable weigh nice color. The only thing O suggest buyer should consider bulk other order and combine shipping with other products with it, because this set alone with shipping it cost almost double. View detail
Jay TripMaintenance Stand
I was worried about the cheap Chinese ones from Amazon, but I decided to buy the Jay Trip one for its long and safe use. I have not used it yet, but it is well made and the purchase was a good decision. View detail
L and U-shaped Attachment is Quantity:Great value for the set!
[How is it used?
I used to use a cheap Rear stand, but I am replacing it with a new one, and since I have several vehicles, both the L and U-shaped ones are available.:I was looking for something that could handle multiple vehicles with Set.
I would have preferred JTrip's, but they are quite expensive, so I chose this product.
Was the one you received as per Image?
The texture is not the best and a little cheap, but I think it is well worth the price.
It was also much lighter than the No Brand STAND we had been using, making it much easier to use.
The assembly is almost complete when it arrives, so all you have to do is adjust the height and tighten the screws.
How was your experience with it?
The body is light and the roller movement is smooth and light.
Usability is normal, but I am glad that it is lightweight, making it easier to maneuver within Garage.
[Points to note]
Hook is somewhat cheap.
If you are concerned about it, JTrip is a better choice. There is a price difference, so please consult with your Wallet.
Also, you need to bother with tools when adjusting the height, so that is MinusPoint.
How did it compare to other products?
It is easier to use than STAND, the No Brand product I had been using.
【Review】
This Rear stand is light and normally easy to use.
Not the best, but considering the price, I think it was worth more than the price.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-10, YAMAHA MT-10 SP
If it's a YAMAHA Motorcycle, you can't go wrong with this one.
I purchased this for Chain Maintenance of yzf-r3. I used to use Side Stand for simple maintenance, but it was slanted and difficult to use, so I bought this one.
The price is a little high, but it is made by Y's Gear, so it is well made and gives a sense of security.
Even a beginner could lift up with no difficulty and did not feel shaky at all during the work.
If it is a YAMAHA Motorcycle, this is definitely the way to go.
View detail
It was easy.
This is my first Roller stand.
I decided to do my first ChainMaintenance and bought it.
When I purchased the product, I watched a video on how to use it and felt comfortable purchasing it.
When I received it and actually used it, it was surprisingly easy to use.
However, I was more afraid of removing the STAND.
View detail
Large satisfied
I used it with RigidMONKEYZ50Z and it is very good.
As expected, it is designed for the 4mini and is very easy to use.
I regret that I should have purchased it earlier, but I own several MONKEYs and will use Large for maintenance.
View detail
Good stand!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
Lightly raised.
It goes up surprisingly easily.
The first time I did it, I didn't always notice if it went up in time.
Since we do not exchange Tire, this is sufficient.
View detail
Great stability!
Anyway, easy installation. Lever length is just right.
A 200 kg Large Motorcycle can also be easily carried.
Four-wheel Tire and sturdy Chassis for great stability.
View detail
It is built with outstanding reliability.
It is made in Japan and has excellent stability.
The price is high, but it is better than using STAND, whose strength design is not well understood.
The L and V receptacles are sold separately, so you should use them for your own vehicle and application.
My vehicle is a KTM, so I bought and use the ShortV receiver.
When lifting, it is easy to place a piece of wood under the vehicle's Side Stand, keep the vehicle as upright as possible, and slide the Roller Stand under the vehicle in an image.
If you are not familiar with it, lift it carefully so that the receiver does not come off.
I think that up to 180 kg or so can be pushed in and STAND applied with their hands without using their feet.
View detail
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
Lift up is easy
Purchased for maintenance and winter storage.
It is used with Hook with ZETA Spool installed.
I have considerably less strength than others, but I was still able to Lift up.
I couldn't stand on the car body Left Side, as it is generally called, and stand on my feet...,
I crouched down behind the vehicle and held the STAND with both hands and lifted it up a couple of times and it was stable,
Women and those who are not very strong can use it safely.
The initial setup is a bit cumbersome, but once it is set up, it is easy to use as is.
It will be quite useful for Oil replacement and ChainMaintenance.
View detail