Reviews
Fits: KAWASAKI NINJA250, KAWASAKI Z250, KAWASAKI NINJA300
Maintenance Good, Custom
We selected this product because it is possible to install it in Cowl even when replacing Oil and no need for drilling.
"Easy installation & looking Custom feeling" Large It was correct.
Other people were also written, but if it falls, it seems that it will be troublesome if Bolt breaks pokerly, so install it with Slider and Set for Upper Cowl as recommended by Striker and distribute Damage as much as possible It seems better to have one..
Well, I do not have items that I would like to take care of so much (^^) v
View detail
I also bought for Brake
I bought it before Shiff side and got on Rear Sets he attached, so I bought it for Brake side too. Both Sides It's a pleasant match. it's recommended. View detail
very good
I got it at the end of Rear Sets.
Rear Sets is not made by Striker, but I bought it in one or more but it came without a problem.
It may be high for the single Body to buy, but I do appreciate it because there are no other items like this.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZX-14R
Buy peace of mind !!
At the same time as delivering Motorcycle, I got it attached at the Motorcycle shop.
Because Mount Bolt knows that Screw lock is sticky and hard. The length of the parts of Right and Left are different, but since the Instruction Manual is carefully written, it is better to read. There are various kinds, but this product is favorite for price and design.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Ninja1000
Large It is satisfactory!
I installed it in ninja 1000 2012 ABS. Anyway Parenthesis Good and Large Satisfaction! Because I like squid rocks, Nojima until the end (Tendanyaya) I got lost. Since I was wearing the Side cover of A-TECH's Twill Weave Carbon, I tried to make Nojima's twill weave than Striker which has only a plain weave ... But since I really liked the shape of Striker, I got lost and got stranker did. As a result, Carbon's eyes' Large Kizi itself is different from Carbon of Side cover, so I think that perfect unity was not even if it was twill weave. (Although the same A-TECH product would give you a sense of unity, by no means Re-Fender of A-TECH did not have the shape Pin)
So, as a result, it was a correct answer to Striker.
Length also became considerably longer than NORMAL, so it seems that you can expect a mudguard effect.
Even when viewed from the back, the level is perfect as well as horizontal feeling. BEET's Exhaust System is on, but Balance with the Exhaust System is also good.
Tone color is slightly more dense compared to A - TECH, Patternwise, it is slightly finer compared to A - TECH.
There was only one problem. Striker 's Rear Fender is integrated with Chain guard, so we also removed Normal' s Chain guard. I asked Shop for work but NORMAL fixed the Chain slider in two places. One of them is fixed with a pin shape which is from Chain guard. Because it is not in StrikerFender, Chain slider becomes slightly unstable if it is as it is. So, I had you do Cut and hold work of Pin shape of NORMAL's Chain guard.
Because it was in stock, it arrived in 2 days after ordering, and it was able to be installed after 4 days so I was very thankful.
View detail
To Silencer
Goods are good, but if lightly attached to the back with Tape fixed I thought that it was easy to open holes with Drill.
I have two Rivet. What you need is → Tape for fixing Drill to drill a hole in Gold genus Crimp tool for Rivet.
View detail
Fits: KAWASAKI Z250, KAWASAKI NINJA300, KAWASAKI NINJA250R, KAWASAKI NINJA2 Helmet50R ABS
My motorcycle has twin silencers, but it didn't take much time to exchange them, and it was pretty easy. However, although I followed their instructions, it became misaligned in the left direction. I noticed that others have also pointed out this fact in
My motorcycle has twin silencers, but it didn't take much time to exchange them, and it was pretty easy. However, although I followed their instructions, it became misaligned in the left direction. I noticed that others have also pointed out this fact in their review comments.
As a consequence, the clearance between the silencer and the right tire became extremely narrow. So I pushed in a rumpled Kleenex between the tire and the fender, and left it there for a day. Maybe it's just my imagination but I think it has been fixed a bit. I hope it gets better from now.
Still I look its appearance, and I'm really satisfied with it!
View detail
Excellent services. Fast shipping with very helpful customer services. The product package was sufficient and delivery was fast. Will definitely shop again.
Excellent services. Fast shipping with very helpful customer services. The product package was sufficient and delivery was fast. Will definitely shop again. View detail
Since the Muffler was changed into the Striker, it stuck.Although a Size is [ 2nd ] the largest in the Lineup, it is greatly [ beyond anticipation ] conspicuous.the raw material of the Sticker is a thin transparent film -- -- I think that it is
Since the Muffler was changed into the Striker, it stuck.Although a Size is [ 2nd ] the largest in the Lineup, it is greatly [ beyond
anticipation ] conspicuous.the raw material of the Sticker is a thin transparent film --
-- I think that it is difficult to stick on a curved surface since it is seldom an extended raw material.Those who stick on the
Tank etc. require special attention.
I think that it cannot remove once it stretches, since it is thin and is strong adhesion.
(I think that it will be torn)
Since it is highly transparent that much and is thin, it does not become the obstacle of wiping, either.
View detail
Compared with the heavy Chain cover of a NORMAL, it is lightweight, and a Design is also smart! It is appearance serious consideration.Since attachment is also only exchanged as it is pure, it is easy.
Compared with the heavy Chain cover of a NORMAL, it is lightweight, and a Design is also smart! It is
appearance serious consideration.Since attachment is also only exchanged as it is pure, it is easy.
View detail
If mud splashes and raising relief is carried out, when a Fender less is used, since it is a longer Fender was thought, and it purchased.I think that it becomes time and effort very well since attachment must remove a Tire.There is distortion as it is
If mud splashes and raising relief is carried out, when a Fender less is used, since it is a longer Fender was thought, and it purchased.I think that it becomes time and effort very well since
attachment must remove a Tire.There is distortion as it is pleasing since the
Styling is good, but it has written also on the instruction manual.Although it will seemingly be repaired if it equips -- ?!
View detail
Received within a week after confirmed order with quality protective packing. Made a question through email and got a quick respond from customer services and made me decided to order through Webike.
Received within a week after confirmed order with quality protective packing. Made a question through email and got a quick respond from customer services and made me decided to order through Webike. View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZX-14R
Although the Side-cowl removal kana - was thought about attachment at the beginning, and clung without removal, it loosened in the Bolt, the stop agent was applied, and it was quite hard. In the case of me, there is a proper tool by chance, and it became
Although the Side-cowl removal kana - was thought about attachment at the beginning, and clung without removal, it loosened in the Bolt, the stop agent was applied, and it was quite hard.
In the case of me, there is a proper tool by chance, and it became somehow.
Although I think that it is reasonably priced as structure of the SLIDER50, I consult with the contents of the wallet on a part for a Front, and a rear part from this, and think the object for attachment.
If the breakage at the time of
Maher fall, etc. are mitigable, I will think look before you leap.
(Not falling is best)
View detail
The Carbon parts is used abundantly, furthermore a Heel guard is also to a Carbon. Kana which was able to carry out the weight saving. If it gets bored, it will change into an Aluminum. Kana ~ which could be a little larger.
The Carbon parts is used abundantly, furthermore a Heel guard is also to a Carbon.
Kana which was able to carry out the weight saving.
If it gets bored, it will change into an Aluminum.
Kana ~ which could be a little larger.
View detail
The Carbon parts is used abundantly, furthermore a Heel guard is also to a Carbon. Kana which was able to carry out the weight saving. If it gets bored, it will change into an Aluminum. Kana ~ which could be a little larger.
The Carbon parts is used abundantly, furthermore a Heel guard is also to a Carbon.
Kana which was able to carry out the weight saving.
If it gets bored, it will change into an Aluminum.
Kana ~ which could be a little larger.
View detail
Since Mr. Striker was used at the Muffler and the Step, it stuck on the Swing arm of the left which became lonely. There is quite a many presence. The fellow to whom back is not simply transparent was better.
Since Mr. Striker was used at the Muffler and the Step, it stuck on the Swing arm of the left which became lonely.
There is quite a many presence.
The fellow to whom back is not simply transparent was better.
View detail
Although he thought that it could attach easily, if it actually attaches, the tool only for is required.
Although he thought that it could attach easily, if it actually attaches, the tool only for
is required.
View detail
Although it worried variously, it became the first conclusive factor that it is a Manufacturer which can trust it. appearance is also satisfied very much.
Although it worried variously, it became the first conclusive factor that it is a Manufacturer which can trust it.
appearance is also satisfied very much.
View detail
[ -- the Webike Monitor ] -- since it falls whenever something is, or it loses, three Pedals of the Red alumite purchased last time are lost altogether -- the last [ this time ] one -- a Slip of a frozen ski slope -- a deficit. It will newly ad
[ -- the Webike Monitor ]
-- since it falls whenever something is, or it loses, three Pedals of the Red alumite purchased last time are lost altogether -- the last [ this time ] one -- a Slip of a frozen ski slope -- a deficit.
It will newly add to its purchase and has already become consumable goods.
The Pedal set of a Striker is diverted to the Step kit of Woodstock last time similarly.
Since it is not the
color model, it is a little cheap, but that of stopping waiting is splendid at any rate at a Basic model (smile).
View detail
Since it was not attached to a Back step, it purchased.
Since it was not attached to a Back step, it purchased. View detail