Reviews
The construction is very good, but when you actually use it, it is very difficult to use.
The make is very good and looks OEM 。 I put it on my MOTO GUZZI which does not have a helmet lock, but it is attached without any discomfort. 。 However, in actual use, the helmets touch the exhaust system because of the low position of the helmets. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000 GT
Before installation, there is a conundrum.
It could not be installed on Axle Shaft as is.
Shaft insert is Quantity:Pair (for Left and Right) Since it is the opposite, the Protector cannot be installed (press-fit) unless it is replaced.
I will have to ask Motorcycle shop to replace the Shaft when I replace the Tire.
(It's a pain to have to pay for labor)
I am very disappointed that I cannot install it even though I ordered it and it arrived the next day.
P.S. I checked MotorcycleCatalogue and all applicable Motorcycles were Nut side Left.
Please note that those who purchase
View detail
Right Side does not fit.
[How is it used?
Frame caps are now available and purchased.
Was the one you received as per Image?
I thought it would be a little brighter Green Light.
Was the installation difficult?
The Left Side easily entered, but the Right Side did not enter completely and jumped out.
I removed it because it was going to get in the way at Brake.
How was your experience with it?
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
[Note] Not compatible with HAYABUSA after 21 model year
As stated in the Title, it will not fit the Type 3 HAYABUSA from '21 onward. The rod end of this shift arm is a Normal Thread Screw and the end of the OEMShift rod is reverse threaded, so it will not fit in the first place. If you must use it, remove the black part of the OEM rod and purchase a long nut and an extension stud bolt separately. View detail
lack of explanation
[How is it used?
Circuit Running
Was the one you received as per Image?
As per Image to some extent.
Was the installation difficult?
Easy
How was your experience with it?
not bad
[Included Parts:were they on?
Bar End would have been nice.
[Was there anything that disappointed you?
That there was only one side.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Plate formula should be used with caution
Body texture was good.
If the Tandem Footpeg is mounted on a Spring, this may not be a problem, but if it is a Plate type, a Plate-fixed nail Cut is required.
The Plate cannot be fixed and moves with the footpeg due to the effect of cutting.
Please be careful when purchasing.
View detail
No way, Bolt broke in the middle of driving.
The product looked and felt great, but during the ride, the Bolt that connects the Pedal to the bar broke and I had to push it home… It's been a month since I bought it… View detail
Fits: Others
No compensation for those who bought the MODEL before the improvements?
The pre-modified MODEL that was left out of any Race.
At first, there was no announcement from the manufacturer, and until just before the start of the season, we did not know whether the system would be available or not.
RaceConcept and you're laughing.
The improved model is released and the unimproved model is used in 2Quantity.:There was no announcement to myself of the terminal Racer that was Set.
I will no longer use it.
View detail
If you buy this, TSR is the …
Frankly, there are many parts, so I think Repair etc. will work, but the rigidity is low and it flexes.
Footpeg is firmly without sliding on number one, but its rigidity is too low, so I think TSR is better if you buy this.
I think that the Fashion and Custom feeling is higher in baby face.
I will change only footpeg to baby face on TSR's Rear Sets!
View detail
Attention ! Use only as a replacement for the passenger footpeg supports
Very nice racing hook, but impossible to use without removing the passenger footpegs and therefore the mounting bracket for the exhaust...which makes these beautiful objects unusable for riding. Very functional for transporting the motorcycle as a fixing hook but which will have to be dismantled to ride. In the end very little interest... Very nice racing hook, but cannot be used without disassembling the passenger footrests and therefore the exhaust mounting bracket...which makes these nice items unusable for riding. Very functional for the transport of the motorcycle as a fixing hook but that it will be necessary to dismount to roll. In the end very little interest... View detail
BFQuality
Helmet may fall when unlocked.
Intuitively, the key is unlocked by twisting it to the Left, but it is unlocked by twisting it to the Right.
That is good, because it is a Piston shaped lock, as soon as it is unlocked.
Helmet is likely to drop out.
If it is a U-shaped Bracket, there is no problem, but this is probably BFQuality.
The Hexagonal Wrench can be easily removed, so it only creates a place to store the helmet, but does not prevent theft.
The great thing is that it can be installed even with the Saddle Bag attached.
This was the only product.
Looking at the heel plate and construction of BF's Rear Sets, I wonder if they have done any prototype testing.
I was worried about it, but it was still a bit of a surprise to me.
I wanted it to get better.
View detail
caution
On the Shift side, there is a 15mm M8 collar between the body and the Plate.
Please note that it does not come with the product, so you will have to purchase it yourself to install it.
View detail
What do you think of this?
When I moss during UTurn, it shattered, leaving only the root.
It's not as effective as I had hoped.
View detail
It was a famous manufacturer, but…
I have never used this manufacturer before, but I wanted to use it at least once because the evaluation from the person who uses it was very high, and I came to purchase it with light curiosity.
It seems that this decision was not a good one, and when it came time to install the Material to save weight.:Aluminum Bolt and Nut were used, but they are not very durable, and they are easily scratched and scraped. I'm not sure if it's just for the 6r, but I feel like this purchase was a mistake.
View detail
BABYFACE Racing hook
Product was good, but the 4 bolts that came with it were too short to attach!
I purchased and installed 4 separate 15? long Bolt.
View detail
Cannot be installed without a special wrench
The installation of the screw has no space with a normal Spanner or Wrench, and cannot be tightened. It is forcibly turning by the hand and installing it, but after all it is the plan which buys a new swinging wrench and tightens it. If you don't have a special wrench that can swing the head, it is impossible to install.
Even if it attaches here, it is difficult to install Hook and Small Helmet very much, and it seems that it is better to prepare even if it is a separate warrior.
View detail
Fits: HONDA HORNET900, HONDA HORNET600, HONDA HORNET250
Sore, as much as we can not build it!
Manufacturer I was worried about before.
Order from the stage of Shimizu ‥, the delivery schedule of next month, wait for the arrival of this month, this month.
?
?
?
?
Huh? Something strange, but ...
Obviously Spec. There are different parts built in. (After all, adopting Pattern, after all, you just can not get the optimal solution, right?
In translation, inquiries returned goods Yuu ~. Ahh..
View detail
Fits: YAMAHA MT-10, YAMAHA YZF-R1, BMW S1000RR, HONDA CBR1000RR, BMW S1000R
It is not conforming
It is set to s1000rr 2015 but the Largeness of Shaft's hole is Quantity : Pair (for Left and Right) Conversely, Large Slider comes to the Silencer side.
Because I'm bothered, I left it until the Tire exchange, but the direction of Shaft is Quantity : Pair (for Left and Right) The effect seems to be small unless it is changed.
View detail
Be careful with one selling.
Is there such a person, who only attaches One Side?
It is unknown why it is one selling.
Anodized Treatment was weak and bald out soon.
View detail
Quantity : Pair (for Left and Right) Wondering if.
It was a sale of One Side.
Because it was written in the product overview, I was bad that I did not read, but this price is a bit high with just One Side.
Because I bought one more by extra shipping fee it cost twice.
Also, Hook is a little small.
I think that it is easier to use a little more Large.
Naturally, there is no installation Instruction Manual.
View detail