Reviews
Body installation itself is easy
Since I bought a used NINJA1000 without a slider, I installed a slider to reduce wounds when falling down.
Removing the cowl is a bit of a hassle, but once removed, it was very easy to install the base plate and the slider cone. However, the M8 Cap Bolt that holds the slider cone in place may loosen easily, so the use of a screw locker is recommended.
It was inexpensive compared to otherManufacturers and the installation diagram in the Instruction Manual was easy to understand.
Two Logo stickers were included.
View detail
![[IDEAL] Swingarm Stand Hook](https://img.webike-cdn.net/catalogue/11500/006-S0801bkb_TS.jpg)
Fits: Others , KTM 1190 RC8R, KTM 1190 RC8, HONDA CBR954RR, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR1000RR-R SP, HONDA VTR1000 SP1, HONDA VTR1000 SP2
Casual Dress-up
For Front Axle Slider and Engine slider
I have Babyface on and a Stand Hook.
The same Manufacturer is used for this product.
View detail
It protected me from standing moss.
I had the same thing installed when I purchased the vehicle. It was not the original purpose of the Slider, but it helped. I only replaced one of the sliders. When I was replacing it, I was playing with the one I had installed and the Black Anodized was peeling off. .... How is it in terms of quality? I feel like I have to ask myself, "How is the quality of the product?" But there are not many other options for this type of car. I just hope I won't have a chance to replace it next time. I am very happy with the quality of the product and the points it comes with. View detail
Custom
Items we do not want to be indebted to you.
The appearance of custom feeling will be increased.
View detail
Fits: SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-S1000 GT
I think it's a good costumer
I think this product is cheaper and more cost-effective than other companies' products. View detail
I think it is cosmetically good.
I think it is a good product in terms of cosmetics, but I would like to see some improvement in design. View detail
![[IDEAL] Frame Slider](https://img.webike-cdn.net/catalogue/11500/006-sk008_TS.jpg)
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1100
I think it's good
I haven't put it on yet, but it seems sturdy. View detail
Compatible model
It also arrives at cb750 rc42. View detail
cosmetically ◎
ZX-10R [24] mounted on
Front of 10R is very luxurious even for OEM with brembo and SHOWA.
Damage to the equipment when it stands up and falls over will require significant repair costs,
I put it on as a cane to keep me from falling.
Hopefully the day when they are active will never come.
Material, because it looks good as one point of view, it gives a good sense of customization.
Compared to other manufacturers, it seems to be a little small, but it is not expensive, so it is OK.
View detail
Fits: HONDA VFR800, HONDA CB650R, HONDA CBR650R, HONDA CB650F, HONDA CB1100RS, HONDA CBR650F, HONDA CB1100EX, HONDA CB1000R, HONDA CB1100
BABYFACE Babyface Axle Protector
I usually enjoy my motorcycle life by riding around town and touring.
This Axle Slider is effective in the event of a mossy accident.
Therefore, we have rated it as ineffective.
This is the first Return in 11 years for the Large type.
This is the first Large type of NAKED.
So, I am riding slowly and leisurely in the spirit of the first time.
As you would expect from Babyface, other companies sell Axle Slider.
I thought it was a very different kind of design.
The only thing is that the Shaft is about 10mm shorter on the CB650R.
And Quantity:Pair (for Left and Right) I want 5mm each.
I would not recommend it to my friends for a moment.
Only about 70% of the Nut has been tightened.
We gave it 4 stars for quality and texture.
I think that's about it in terms of cosmetics.
View detail
The front is also Babyface to match the engine slider.
For Triumph TRIDENT, Babyface Front axle protector was installed on Tigersport 660 as well as Engine slider.
Although less expensive than OEM products, the appearance and quality of the parts are good, and I think they are reliable parts.
Installation is easy, but I think the attached Instruction Manual is difficult to understand.
Effectiveness is unknown because there are no falls.
View detail
Fits: TRIUMPH Speed triple, TRIUMPH DAYTONA955i, HONDA VFR1200F, HONDA CBR1100XX, HONDA CB900Hornet, HONDA CB600F, HONDA CB500X, HONDA CB500F, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR650F, HONDA CBR650R, HONDA CB650F, HONDA CB650R
Standstill Backup
When parking the car, it fell over and broke Babyface's Slider,
The Crank Case Cover, Under Cowl and Exhaust System were scratched.
I did not expect Slider to break,
I put on the Timing Hole Plug for a double measure.
It is quite expensive, and if this gets damaged, that would be sad,
I feel it would be cheaper to replace the Crank Case Cover.
However, I think the pointing color of Orange works well and tightens up the Cover area.
View detail
It is easy to install.
This is my first Return in 20 years, so I bought it to prevent standing moss!
Torque wrench is required as 5Nm is indicated for screw tightening
I didn't have one, so I bought a Torque wrench, but I didn't know how to use it, so I took it to a Motorcycle shop and installed it myself while they showed me how.
The appearance is not so prominent, so it may not be enough for those whose main purpose is to dress-up.
I don't know how effective it is because it hasn't rubbed off yet.
View detail
It is a good product
I purchased this product because I was concerned about working with the Shoulder Type since the Motorcycle Axle is not hollow. There is no problem in installation. I don't think it will come off with the Y-type Hook. The quality is quite good, but the price is high. If it were a little cheaper, it would be easier for people in need to get their hands on it. View detail
Fallen cannibals
The pedestal is rugged, but it is attached at a position where the Damage does not go directly to the body of the vehicle at the tipping angle.
Quantity:Pair (for Left and Right) Asymmetrically, there may be a preference for or against, but it seems to serve the role well enough.
View detail
We will protect it well.
Well done.
If the Swingarm Protector is used in combination with the Mirror, Handlebar Weight, and Lever are only affected by a fall.
It protects them well.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Frame Slider
The price is low, installation is easy, and Parenthesis is good. View detail
Fits: KAWASAKI ZRX, YAMAHA FZ1, YAMAHA MT-01, YAMAHA YZF-R1, SUZUKI GSX-R1000, KAWASAKI ZRX1200, SUZUKI SV1000, KAWASAKI ZRX1100, APRILIA RS250 (Aprilia), KAWASAKI ZX-12R, KAWASAKI ZRX1200, SUZUKI SV1000, KAWASAKI ZRX1100, APRILIA RS250 (Aprilia), KAWASAKI ZX-12R
Axle Slider
These are custom parts that only look good.
We have the same Babyface as Frame Slider.
View detail
Fits: BMW S1000RR, BMW S1000R, BMW S1000R
Inexpensive among Front Axle Sliders
[How is it used?
Used as Slider in Front section
Was the one you received as per Image?
It is the same as the photo shown in the publication.
Was the installation difficult?
The installation itself is simple, but the Quantity:Pair (for Left and Right) Which of the following is to be installed as Main?
Check the installation. Check the Instruction Manual for handling.
The part that passes through the Axle Shaft is fully threaded,
It has a rubber tube to prevent scratches, but it is obviously long.
Since it was not possible to install it, the tube was cut and shortened a little for use.
How was your experience with it?
Hopefully not used, as it is effective in the event of a fall.
BABYFACE's Axle Protector was selected because of its proven track record and favorable reputation.
Since the fit is not that great, it is good to be able to wear it in a natural way.
The surfaces are just right.
[Included Parts:were they on?
Handling Instruction Manual available.
[Was there anything that disappointed you?
The resin part is grooved, but it is not chamfered, so if you easily grip it and tighten it,
Easily cuts hands. I think it should be chamfered originally because it is very sharp.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I would like the resin part to be chamfered.
View detail
Fitted on a 2023 Honda CBR250RR
It is also available for the 2023 model year.
I am very satisfied with the beautiful finish of the Large size change in Aluminum Cut-out.
Aluminum Collar for installation is attached, but there are two sizes, 10mm and 12mm diameter. 12mm diameter can hide the scratches on the crankcase bolt hole when the OEMBolt is removed, but 10mm diameter can show the scratches a little. However, the 10mm diameter Bolt is slightly scratched.
I would have liked them all to be 12mm diameter colors if possible.
In my case, I inserted a commercially available 12mm Washer so that the scratches would not be visible.
View detail