Reviews
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA CROSSCUB110, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB110PRO
I was hoping?
In the product introduction photo, it looks like a Push rod Rubber.
I was expecting Large...
After installation, I checked and it was only half hit.
In the first place, half of them seem to be hit even in NORMAL.
I got the impression that there were a few more hit surfaces, but not as many as I had hoped for.
The construction is good, but it's not surprising considering the price.
Cost performance is poor
Hoping for a protective effect?
I gave it a 3 star rating.
View detail
Fits: HONDA ADV150, HONDA CT125, KAWASAKI D-TRACKER125, HONDA GROM, HONDA GROM, HONDA GROM, KAWASAKI KLX125, HONDA MSX125, HONDA MSX125SF, HONDA PCX, HONDA PCX160, KAWASAKI Z125 PRO, HONDA CROSS CUB, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB 50
Hyper Ignition Coil
Acceleration feels better in city driving. View detail
MONKEY Overhaul above the waist
I bought it because I need it for my MONKEY waist overhaul. My R-Stage?D 106cc needs frequent maintenance. View detail
![[Repair parts] Exhaust valve](https://img.webike-cdn.net/catalogue/images/129133/00-01-0419_01_TS.jpg)
Head overhaul
I appreciate the Rose of Parts sale, but it would be helpful if it were cheaper. View detail
![[Repair parts] Intake valve (R-Stage+D)](https://img.webike-cdn.net/catalogue/images/127838/00-00-1340_01_TS.jpg)
Head overhaul
I appreciate the Rose of Parts sale, but it would be helpful if it were cheaper. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
I feel like I have a lighter blow off.
Replaced with moto DXPlug and coarse filter. Installed Takekawa's Normal lookSports Exhaust. I felt the exhaust sound and the power was not changed.:Pair (for Left and Right) box did not fit well and broke the nail of the box. The Normal filter was not particularly dirty at 6,000 km mileage, so I didn't have to replace it. View detail
SP Takekawa Power Filter
“Replacing with NORMALAir Filter improves the intake efficiency and enables to increase the power output even when installed on Normal engine. ”Although it is claimed, I could not feel it when driving in the neighborhood.
(Impressions after attaching Fine Type)
I wonder if I will be able to feel it a little if I drive at high rpm range in Bypass, mountain passes, etc. during long distance touring in the future.
Another point of purchase is the ease of installation and return to OEM since it is an OEMFilter and exchange type.
View detail
Fits: HONDA CT125, HONDA GROM, HONDA MSX GROM, HONDA MONKEY125, HONDA MONKEY125, HONDA SUPER CUBC125, HONDA REBEL250, HONDA REBEL500, HONDA CBR250R, HONDA CB250F, HONDA CRF250 RALLY, HONDA CBR400R, HONDA CB400F, HONDA 400X, KAWASAKI Ninja400R, HONDA CRF250L, HONDA CRF250M, HONDA NC700S, HONDA NC700X, HONDA CBR125R
sp takegawa oil filter cap
It's a product with good quality and texture information For usability, the engine case can be marked with red dots Easy to install Cost performance and comparative price are similar to other products and can be replaced by the brand you want WeBike packaging is always good. Shipping and packaging will arrive in a week Std oil caps can be released by hand, but these products need tools m17 socket View detail
Purchased in conjunction with carburetor's conversion to Large type
Purchased because I changed from a 50Engine to a 100Engine and the Carburetor intake was too large.:Purchased at Set and installed without any difficulty, the intake air volume was as expected. View detail
![[Repair parts] Overhaul set](https://img.webike-cdn.net/catalogue/images/34581/05111808_5732f6a551c29_TS.jpg)
I've run 7000k.
I thought it was time to buy a kit to replace the entire piston, but this time I decided to use only the ring and gasket.
I haven't worked on it yet, so I can't say for sure, but if you're bore up in Takekawa, I think these Repair Parts are a must.
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY BAJA, HONDA CRF50F, HONDA XR50R (for competition), HONDA CRF70F, HONDA XR70R
Combined with Mukawa's Street outer rotor
Since the Engine is basically assembled with Mukawa's products, CDI's
The choice was naturally this one, but suddenly the Tachometer
It started to run out of control (until then, it was the same Spec.
It was working) I tried all kinds of countermeasures, but to no avail.
Finally, I bought a CDI for a Chinese Engine from an auction.
The funny thing is that the Tachometer calmed down when I did.
It was the ending. I still don't get it, but I'm not sure if we're incompatible.
View detail
Fits: HONDA GROM, HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125SF, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CT125
It lacks durability
Failure to manage Oil will result in baking.
Oil cooler is indispensable because the oil temperature is also exploding.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
Physical changes, honestly?
I purchased a Power Filter from the same manufacturer to go along with Takegawa's SCRAMBLER Exhaust System, which is already installed in my MONKEY125. First of all, I would like to conclude that, to be honest, it is neither good nor bad.
I did not feel much change in the large filter. I selected a fine filter out of fine and coarse filters this time, but it may be because the intake efficiency increases compared to the normal filter,
The sound from the Exhaust System was even better, but I could not experience the Torque feeling and high RPM range extension that others have mentioned.
Rather, when ThrottleOff was turned on, backfires would sometimes occur, making it seem as if the fuel mixture was not correct. It was often thought that the fuel condition was not correct. We have already changed the plugs to Iridium plugs, so we will review the ignition system in the future.
I will make another impression when I have more mileage due to my schedule.
View detail
Convenient to have
Useful for adjusting Idle Screw.
Design and Parenthesis are good, and if the price is low enough.
Best
View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125SF
That's pretty good
I bought this one because I replaced the slobo, and it's easy to set up! View detail
Fits: HONDA GROM, HONDA MSX GROM
WR’SOvalShort and Quantity on JC92:Set
I've added O Vitron MicroReactorM1 and the power has gone up quite a bit.
Unfortunately, I did not experience any power up. Sugar CrystalFilter is used.
Exhaust System has been changed to WR’S, OvalShort, so Intake and Exhaust Quantity:In Tune with Set.
ECU is Reset.
I bought the car new and the Normal filter was soggy from the start.
View detail
Idling Stable
The idling is stable as OEM. I would like to run the engine until it gets hot and test if the idling is stable even when the engine is stopped. View detail
Note to Size!
[How is it used?
I purchased this for the purpose of overhaul of an old Engine.
How was your experience with it?
After long use, discoloration and worst wear will appear, so it feels good to change it to a new one along with the Piston and Piston ring.
Plenty of Oil should be applied when using a new product.
How did it compare to other products?
I think the quality is the same as OEM products.
[Points to note]
This Piston Pin is the length of 72cc OEM Piston, so it cannot be used with the Piston of the Mukawa Bore Up Kit of SStage, RStage, etc., as it is slightly longer.
It is difficult to know the length, so I felt that it would be better to state something like "for 00" in addition to "Size".
View detail
Fits: HONDA MONKEY, HONDA GORILLA
Interference without Adapter for pivoting etc.
[How is it used?
Spec. change due to Bore up.
Was the installation difficult?
The included Adapter is too thin, and without a swivel Adapterretc., clearance between the Hose attachment on the bottom of the carburetor and the Engine is difficult.
How was your experience with it?
It is still temporarily attached, but the bore is designed for R-stage, so it is not suitable for Normal head.
[Included Parts:were they on?
Included Parts:of Throttle Wire and Fuel Cocketc.
[Was there anything that disappointed you?
The carburetor itself is quite large, so I think it would have been better to design it with a little more space for a larger size.
▼While inexpensive Chinese parts are prominent, the ones from Mukawa are expensive and may not look cosmetically pleasing, but the accuracy of the jets is completely different, and there are some great ones like TV26, so we are looking forward to seeing them.
View detail
Required for Banjo adapter made by SP Mukawa
If you are using SP Mukawa's Banjo adapter, you will need it.
Banjo adapters from Universal Product are not available.
It is a slim line hose, so it is thin and easy to handle, but it is good.
The price is too high.
View detail