Reviews
Made in Japan gem products
Tempo is a long-established store, Tadao SP.
Instruction Manual is also polite, goods are beautiful, installation can be Smooth. And yet this price! It is a product that feels a company effort.
It is performance, but there is no Large width low speed Torque up like you see in Impression. It will be Brush-bo.
It feels like the valley of Torque is supplemented slightly.
I plan on Willy, but Front up was possible from a lower rotation.
Recommended because it is a wonderful item.
View detail
Only looks
I bought sp Tadayo's development blog and I bought it because Impression is good, but I regret saying it clearly.
Turning on the engine you are talking about will make a strange sound with Tingly Chillin. The Instruction Manual says Material problem.
Our WR250x is a combination of fmf Q4 and the Box of Para.
My friend rides on fmf Park Core and Mega bomb's WR 250x, so apparently the Full Exhaust System of fmf is Torque fully and there is Punch. On the development blog I have written only Parenthesis good things, but after all it is a price. Although I am a bit expensive, I regret it is Large that I should have bought Mega bomb.
View detail
LongTourist is required equipment? (Pay attention to the delivery time of the Sale period!)
I ordered 2015 / 7 / 20, I learned that SP Tadao is the target at SummerSale and ordered it on Wee Big immediately.
It was supposed to have stock until two or three weeks ago and I was thinking that it would be enjoyable for summer vacation even if it was delayed to some extent, but as Timing seemed to be late, immediate delivery was impossible, and the actual delivery date was two months To wait - - -
I was not in time for the planned summer vacation orz
CRF250L / Not only M ride, people thinking Tadao nationwide seemed to think the same thing (Crying)
Please pay attention to the delivery time at Sale.
Well, this is about this product.
When installing
- KITACOKITACO : 963-1000020 Full Exhaust System Gasket (1 Set of 2pcs. )
1 pc at the engine side of the above copper packing. I used it. (replacement)
Accuracy is perfect.
After installation, I went to Long touring about 3 times.
First I felt it at the beginning, the vibration in the low speed range and the breath feeling became considerably smooth, and it is a pretty elegant fee Ring.
"Dudaddadd (Kyukyukyutsu)" Behavior like the engine stall is absorbed, and it sticks considerably even under load.
This is when parking - Low load such as Camping campus - Very easy in places where you are forced to run at low speed.
During ~ - Even when Axel is turned in the high-speed range, the feeling of explosion as if to hit was suppressed, and the impression that the Saw wave became a sine wave.
Thanks to the elegant Fe Ring, there are no numbness of the hand that I felt until now.
Forest road where road conditions change dramatically. However, Accelerator operation becomes very easy and you can enjoy the scenery even more.
Exactly "Feeling E !!"
I should have attached it earlier.
Thank you Tadao President.
However, you can feel even more impressed if you know the change from OEM.
If you can enjoy it with OEM if you like.
It is such a gem.
Especially, who is Ron Two. It will be various to become Stress-free.
I highly recommend it!
View detail
To the price price
I am in good shape.
It is thicker and longer than OEM
Combined with the external exhaust system, I had a hard time installing the PowerBox so as not to touch the Crankcase
Performance is Image which makes Torque's regulation uniform when opening Axel
Specifically, it keeps the Torque constant regardless of which throttle opening you open
Combined with FMF's Exhaust System, I was able to experience the above changes finally after lowering the Sprocket of Front
Be careful when combining with a missing Exhaust System
View detail
It is a good fee Ring
Since it was installed together with FMF Q4, it is subtle whether it is an Exhaust pipe effect, but it got easier to ride than NORMAL.
Also the dandruff came to rotate well by Smooth.
CO2 adjustment is necessary, but it became more fun WR.
However, the heat from Exhaust pipe Exhaust Chamber is intense. I want the heat shield plate guarded to Exhaust Chamber because it is optional. I think that I will make my own at Carbon, but I am worried that I can endure that heat - - - -
View detail
Durability is difficult
I was wearing it on the XG 250 TRICKER of FI Vehicles
Cracks in the PowerBox part dropped with use under less than 2,000 years using less than 10,000 km
I do not know whether the cause is vibration or exhaust pressure, but it is regrettable
View detail
It's good.
Special item was installed in CRF 250L.
According to the result, there is no loss on installation.
Torque up at low and medium speed was felt, and Motatota became agile. However, regarding the high speed growth in the development explanation ... I can not feel that far. Since it is an off car for once, I do not ask for it (Lol)
Regarding installation ...
Since the Exhaust System is equipped with MORIWAKI's MX-BP, this PowerBox is not compatible because it is considering installation with the OEM's Exhaust System (Is it bad?) It was hard to install.
In addition, OEM's Exhaust pipe Cover can be installed, and wearing can be done without problems, but when the interval between Frame and Cover becomes wide, if you do not wear OffBoots, the foot of Pants will get involved , I caught on Cover, I melted Nylon type Rain jacket and Pants with Exhaust pipe. So, Exhaust pipeCover was made by me and improved.
(Box seems to fall short enough so it does not seem to hit Pants)
It is exhaust sound, but it got a little Large. When the rotation reaches a high speed "Phosphorus phosphorus" And I hear a high sound.
Installation etc. Although I had a hard time, I think that the performance is no doubt.
View detail
Is it a standard WR ride?
Detailed impression is rolling on Net, so I will give personal impressions.
Running slowly while running low speed changes to feel like running and running.
Is it confusing? (Lol)
Well, I think buying it will not hurt, and if you do not like it is resold!
View detail
Personality to SEROW 250!
For SEROW 250 "SP Tadao" I tried it!
Ideal is Titanium, but with this Material in this Material
Because this price, there is considerable Reasonable feeling
OEM Cover can be used as it is, it is done well!
Even from some shape of Lunch, it is strong even for high rotation
I could imagine, that was right.. It is Smooth!
Conversely, why does FISEROW power down to 18 horsepower
I feel like I can understand a little whether I was aiming for this OEM characteristic
From that point of view, this SP characteristic is
"OEM" It feels like you get to more people more
It seemed quite interesting. (^. ^)y-.. o ○
The goodness of OEM remains until Limit Smooth to high rotation
I realize that it is making good to stretch
I think whether it will be easy to run anywhere. (^^) /
No "Smooth & Flat, feeling good!"
View detail
Try using it for 1 year.
About installation
Because it comes with a very polite Instruction Manual, I have not hesitated particularly about the procedure.
As a precaution, Exhaust pipe ? It is necessary to have a liquid Gasket in the Exhaust Joint part,
Chamber and Engine, Heat Guard There are not so many clearances in two places, backward and Frame.
At the time of installation, Dustclothetc. It is better to work while biting.
About Body
It is thicker and heavier than OEM's one.
Material : Because it is Stainless Steel it will not rust. I think that it was good to buy just this.
The OEM's Heat Guard can also be used as it is also a great happy place.
Try it.
Acceleration will be easier. You can feel the difference by running.
Compared to OEM, the overtaking ? Uphill ? 80km / I was able to feel a margin by acceleration after h.
I can not go back to OEM anymore.
Regarding fuel consumption, there was hardly any difference in fuel economy driving, but it drops a bit in everyday use.
I think that it is because it turns into nature and probably will ride after probably changing.
For the sound, I felt Engine noise became bigger than the OEM compared with the OEM.
On joint use with Planarus Exhaust System
It is said that it is manufactured assuming use with Normal muffler, but I feel that there is no particular problem.
Exhaust pipe reported by other site ? About the problem of the clearance of the Exhaust Joint part,
In my case, after temporarily tightening the exhaust system, after adjusting the position with the grinding wheel I managed somehow.
View detail
Inexpensive and slow Torque up!
I am on the WR 250 R.
Up to now I have been taking NIRMAL for intake and exhaust systems, but since last year I have participated in Enduro competition "When the car stops or does not stop or it stops when you want to cross the difficulty by taking Balance with Limit" And 'Torque will become thin from the middle stage to the latter half when I'm climbing a steep slope in Second' I was curious about two things.
It was cheap in Exhaust pipe which Torque said to become fat, and I thought that there are reasons why Large men are using it and purchased it.
I used it in combination with Normal silencer for several months after purchase. Recently, it is combined with Delta's Silencer borrowed from a friend. Both can be combined without problem.
■ Impression attached
It was Full normal all the time so we immediately understood the change just by changing the Exhaust pipe.
Both of the above scenes, which has become better either! Big Li!
WR is Motorcycle which can be blown pleasantly with Power coming out at high revolution, but I was relieved as it was kept properly.
However, friends who bought WR 250 R and exchanged for Power BOX relatively quickly "I did not understand the change" I said.
It may be hard to notice if NORMAL's performance changes before it penetrates into the body or runs around different courses than usual (. - Ω <) ゞ
Running in the same way in the same way and exchanging only the Exhaust pipe makes me feel that things are improving absolutely.
Do not disturb high rotation by slow Torque up. This is no mistake ~
* Since Exhaust Gasket is not attached, it is good to prepare one when mounting.
* The beginning is a beautiful Plating color, but when you run you can see photos (Right) It will become a burned color like.
View detail
Tadao POWER BOX wearing
I finally finished installing the other day. Rise from extremely low rotation to Smooth, the bluntness that was in middle rotation has gone away and the rise is improved. The middle and low speed fee Ring was improved and the strength was improved. I was wondering if there are more changes, but about 20,000 yen, enough. Now the Exhaust pipe is also burning beautifully Gold color.
View detail
Performance priority over appearance
Hatachiko Otter Rider (Self-name) However, I wanted Torque to be able to cross the 2nd and 3rd speed in the forest road, I purchased PowerBox. As far as you saw your Impression, there was considerable expectation, but after installation, I tried it once, but I feel expectation Hap Gap. However, severe at low speed disappears, and a considerably Smooth feeling.
Compatibility with FMF Q4 (attachment) Also outstanding. We will review the air conditioning, inspiration and will continue to the best condition. The point of concern is the exhaust heat of the summer season.
View detail
The PowerBox Exhaust was a beautiful result as expected.Since it had not gone to run after attachment yet, I do not understand, but the low-pitched sound region became thick and the exhaust sound turned into sound which is truly likely to run.Although it
The PowerBox Exhaust was a beautiful result as expected.Since it had not gone to run after attachment yet, I do not understand, but the low-pitched sound region became thick and the exhaust sound turned into sound which is truly likely to run.Although it was not difficult work, the
attachment work itself did not have bad one, a Delta-barrel Muffler, and quite satisfactory affinity, and since the Muffler fixing screw in a Tandem step was not attached, attachment of it fixed it with the Wire for the time being.The
PowerBox Exhaust itself is a recommendation article at WR250 R/x riding, when a Lux, a Power, etc. are taken into consideration.
View detail
[Webike Monitor] It is attachment at the Normal muffler.The attachment itself will think whether it can do without suffering troubles so much, if there is even a tool. Although a terminal area with a Muffler is hard and I required time for remova
[Webike Monitor] It is attachment at the Normal muffler.The
attachment itself will think whether it can do without suffering troubles so much, if there is even a tool.
Although a terminal area with a Muffler is hard and I required time for removal attachment, there was no problem in particular other than it.Although only
town riding is carried out, I think that surely it becomes easy to run.It is also good for the Heat guard of the NORMAL to be able to use.A Heat guard for exclusive use also wants to develop by one with odd heat of the
PowerBox which is.Since he has a feeling that the
right leg is burned, even a star is a Minus.
View detail
I think that attachment is also easy, cheap and excellent in a Cost performance. Since Silencers were exchanged previously, it was hard to feel a difference, but the rotation region which uses it abundantly became easy-to-use. appearance is also
I think that attachment is also easy, cheap and excellent in a Cost performance.
Since Silencers were exchanged previously, it was hard to feel a difference, but the rotation region which uses it abundantly became easy-to-use.
appearance is also a Beauty in SUS mirror finish.
Although it is a fine place, it is appreciated again that a pure Exhaust pipe protector can be used as it is.
It becomes a position of those who use, thinks that mono-structure is carried out, and is likable.
Since the Exhaust-pipe terminal area with
pure Silencer is like [ a size ] an Exactly, it exchanges only Exhaust pipes (premised on a boosting performance), and thinks that it is recommended also to those who want to use a pure Silencer.
View detail
[Webike Monitor] It can equip by if developed using the Muffler of FMF, without using the Spacer for pure Exhaust pipes of FMF. It is got blocked, and it is thick like the Exhaust pipe made from FMF, and can equip a FMF Muffler as it is. In t
[Webike Monitor] It can equip by if developed using the Muffler of
FMF, without using the Spacer for pure Exhaust pipes of FMF.
It is got blocked, and it is thick like the Exhaust pipe made from FMF, and can equip a FMF Muffler as it is.
In the case of a
authentic positive one or the Muffler of the other company, the part it becomes impossible to use a Gasket, and the impression to which wearing is likely to become severe are received.
Probably, it is good at the time of wearing to equip wrapped in the Vinyl currently used for packing, and to remove a Vinyl after wearing, since it is beautiful at the Polished.
About the using feeling, since the placebo effect interferes dramatically, it does not tell, but since individual difference created the comparison of the sound in various Exhaust pipes, please listen to it in the following URL.
Since it is the comparison of
sound, please prepare a Headphones.
http://www.youtube.com/watch?v=gMv5_bOC9tI
.
View detail
[Webike Monitor] It exchanged with Silencer change. attachment is easy! Only Exhaust pipes are removed and exchanged. Work is finished before or after 10 minutes. It runs... It is more certainly than forward good! It can feel!
[Webike Monitor] It exchanged with
Silencer change.
attachment is easy! Only Exhaust pipes are removed and exchanged.
Work is finished before or after 10 minutes.
It runs... It is more certainly than
forward good! It can feel!
Appearance is also smart to it and satisfied with it.
They were goods with a high degree of satisfaction considering the
price.
View detail