Reviews
Tools used only occasionally are SK11
I use basic KTC and Tone for tools.
I use SK11 for tools that are used only occasionally.
Insert angle of this Deep socket:6.35mm (1/4Inch) Purchase
Sprocket Coveretc.It is necessary to remove the bolt that is deep in the bolt, and it is necessary to remove the bolt that is deep in the bolt.
Frequently used insertion angle:9.5mm (3/8Inch) Deep socket in the
If you try to use the 8mm, the Ratchet Pouch opening will be
It's thicker, so it hits the Cover.
So, insertion angle:6.35mm (1/4Inch) will be needed
But I don't use KTCetc. so I don't want to buy KTCetc. for my Wallet...
Thank goodness for SK11's Socket
Reliable quality at a reasonable price
I use KTC and Tone where I hang Large Torque.
The parts of SmallTorque that are not used much are supplemented with SK11.
View detail
A must have tool for any tool box.
This tool comes in handy for all my little jobs and some big ones.The depth of insertion of the socket allows the optional setting of fixed and pivoting.it can be used as an extension bar.It is pretty sturdy and well made.The Japanese quality shines through, the feel in the hand is incredible. It's quick to use the handle is large enough to get a good amount of torque on the screw or nut being tightened. so far the tool has been very durable and not let me down while being used. View detail
Hammer for punching
[How is it used?
I was looking for a large hammer because I had only a small hammer to smash during maintenance, and a large hammer is also a small hammer.
Anyway, I bought it because it was big and looked sturdy.
Was the one you received as per Image?
It has a reasonably Limit weight to support with one hand.
It was quite ideal.
How was your experience with it?
It is useful in many ways, such as tapping the Shaft and Shock driver.
I have been handling it roughly, but so far there has been no damage.
The grip of the handle is also good so it does not fly away.
[Points to note]
It has a reasonable Size feel to it, so it is difficult to store.
Also, since considerable force is applied to the parts, there is a possibility that the parts may be destroyed if the work is done in a frustrated manner.
How did it compare to other products?
The power is different than the chubby Hammer I had on hand.
【Review】
This tool is unnecessary if you just want to maintain your Motorcycle normally.
It can be used to pull out rusted or stuck shafts on immobile or abandoned vehicles.
View detail
Easy-to-use, handy tool
[How is it used?
Used for Motorcycle and car maintenance
How was your experience with it?
Solid for the price.
It is mirror plating with high accuracy and less rattling, so it can be used for bolt and other parts.
I don't know if it's almost impossible to put a scratch in it.
If I may say so, it is a little disappointing that there is no change in the hardness of the swing even when the Bolt of the swinging part is tightened.
How did it compare to other products?
It's not a swivel, but there's not that much difference in the Ratchet section compared to the KTC.
I feel a little rattled.
No problem for normal use.
[Points to note]
The hardness of the swing cannot be changed by tightening the Bolt on the swing section.
If the force is applied in a strange direction, it will break.
That's a little inconvenient.
Other than that, it is a handy tool that is easy to use.
View detail
Moderately useful Ratchet
[How is it used?
Used for installation of purchased parts and simple maintenance
How was your experience with it?
I like the Small TypeHead Ratchet because it makes it easy to access tight spaces, which is often the case when messing around with motorcycles.
Furthermore, the handle is made of resin, so even if you accidentally hit the body of the car when you turn it quickly with the Head, it will not be damaged thanks to the resin, which is a very high point.
Socket is also push-locked and smooth with 72 GEAR
Cost performance is quite good.
How did it compare to other products?
I also have KTC, Tone, and Koken Ratchet.
SK11 is by far the smallest in terms of head compactness.
I don't think it can handle LargeTorque, but for light maintenance, this is sufficient.
[Points to note]
Unlike KTCetc., it is not overhaulable, so if it breaks, you have to discard it.
I'm sure you will be able to find a new one. I guess the good thing is that it is inexpensive and can be replaced without hesitation.
Buy one as it is easy to use as a miscellaneous tool.
It is easy to use, and I am sure it will become the number one in use.
View detail
I thought I wouldn't have to do without it, but I finally got my hands on it.
[How is it used?
ESTRELLA's filler cap is a type with a minus cutout similar to the Timing Hole Plug, but it is usually opened with a slotted screwdriver with a large slot, so I have not touched the coin driver. I have not touched the coin driver.
One day, I tried to open the filler cap with a slotted screwdriver to put in oil, but I got stuck... I didn't want to do it, but it was an emergency and I tried to open it with a coin, but the coin lost out.
I finally reached out to Coin Driver because I knew I could not turn my back on them.
Was the one you received as per Image?
Although the shape itself was the same as the product image, the actual product seemed smaller (compact) than I had expected.
This was not a problem, as the compact design is more convenient to keep in a tool box.
How was your experience with it?
It was the first time for me to use the Coin driver, and I was a little worried if it would fit because there was no description of size and so on, but I was able to use it on ESTRELLA and Filler cap without any problem. I was able to open it safely.
[Points to note]
Even though it is a Coin driver, I think it is indeed useless if the Size is not right.
It is a good idea to check the Size of the part to be used before purchasing.
How did it compare to other products?
It definitely works better than Coin.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
SK-11 9.5sq T-len
Purchased after being recommended by an acquaintance
It has become my main tool because it is very easy to use and works well above its price!
However, there is also Demerit, and I think that the Socket insert often becomes Free in the middle of turning and cannot be used as a Spinner.
Other than that, it's great.
View detail
6.35mm (1/4Inch)
CompactRatchet, insertion angle:6.35mm (1/4Inch) This is a purchase for use in
3 different lengthsQuantity:Set, it is good because it can be used in different places of use.
6.35mm (1/4Inch) It is small, not heavy, and does not take up much space as an on-board tool, so it is likely to be quite useful.
View detail
For servicing and maintenance use
Affordable price, so much Quantity:Set, making it convenient to use and use.
The Level is sufficient for everyday use and is fine in use.
View detail
Small, Compact
I wanted a compact, small-sized product that could be used as an in-vehicle tool, so I purchased this one.
It is quite small. Large enough not to get in the way, tough to apply strong force, but usable enough.
It is a useful tool, although it is difficult to convert the tightening direction due to its small size. The selling price is a little high, though.
View detail
Easy-to-use tools
Convenient for tight spaces where a Socket wrench will not fit.
I recommend it because the quality is not bad for the low price.
View detail
products with advantages and disadvantages
This is a swiveling Type, which can be fixed, but it comes off easily.
You should also buy a regular T-type Handlebar.
View detail
Mistook it for a hexagon and bought it.
[How is it used?
I bought this to loosen the Driven Sprocket on my XJR400R.
Was the one you received as per Image?
I did not read the product specs carefully and bought it thinking it was a hexagon, but it was a dodecagon.
It is not impossible to use a 12-square, but the way the Torque is applied changes from a 6-square to a 12-square, and it is difficult to use in places where considerable force is required.
How was your experience with it?
I still could not loosen the force well.
This caused a little damage to the Nut and I failed. This was my own fault, though, so I had no choice.
The product is inexpensive and easy to use.
[Points to note]
Read the product Spec. carefully!
It makes me sad when I buy tools I don't use lol.
How did it compare to other products?
I later purchased a similarly priced hexagonal VERSION.
I think the quality of this product is slightly higher.
View detail
Robust tool.
[How is it used?
I purchased this to remove the Oil Inspection Bolt on the lower side of the Engine on my CB1100.
Was the one you received as per Image?
It is a robust tool that does not seem to break down in the slightest.
How was your experience with it?
I was prepared to remove the bolt because it was the bolt of the engine part of a Large Motorcycle, but it came off so easily with this tool that I was surprised.
[Points to note]
If the Engine Guard or something else interferes, it is a hassle, but it is necessary to remove everything.
How did it compare to other products?
I don't know about other companies' products, but a tool with a sense of security is the best because it is a part that cannot be recovered if it is licked.
▼Although rarely used, it is a good idea to have it on hand.
View detail
Sk11 tool good.
It's a good value for the money and well made, useful in tight places where drivers and such can't get in. I have used other sk11 tools and they are very good and reliable.
Thank you very much.
View detail
For cutting Throttle Wire
[How is it used?
The Accelerator Wire had been deformed by a vehicle left unattended for a long time, so I purchased this wire for cutting when replacing the Inner wire.
I chose it because it was inexpensive and seemed to cut Wire of a reasonable thickness.
Was the one you received as per Image?
It is smaller and less bulky than expected, so it seems to take up less space when stored.
It is also equipped with a stopper, so there is no need to worry about it opening on its own.
How was your experience with it?
I cut the Motorcycle Accelerator Wire and it cut in an instant with very little effort.
When I used to cut Wire, I had to work very hard with Nipper or something like that, so the process became easier.
As advertised, the cutting surface is clean and good.
[Points to note]
Lines above the cutting capacity are (Size sensitively) I don't think it will cut it.
It seems to be used only for cutting fine lines.
How did it compare to other products?
Naturally, it is definitely better than the hand-held Small Saisai Nipper.
The dedicated tools are good, although they will probably be used only a few times a year, if at all.
【Review】
Wire can be cut quickly with little force.
However, it is a tool that is not used for normal motorcycle riding.
I only use it when I really need to replace inner wire on an old car.
View detail
For Air dusterDebut.
[How is it used?
I installed Compressor at home and bought it for skipping water after car wash and for carburetor cleaning.
I chose this product because it is the first pc. that I am buying for myself, so I thought it would be a good idea to start with an inexpensive one.
Was the one you received as per Image?
It arrived exactly as pictured.
However, the Body is full of plastic feel and cheap.
One-touch plug is included.
How was your experience with it?
I thought it was normal and easy to use.
Smooth operation without any particular snagging.
There are no air leaks or damage, and well, I felt it was well done for the price.
[Points to note]
Not particularly
Even beginners can use it as soon as it arrives.
How did it compare to other products?
I have used the ones made TIGHTLY by Gold, but I think this product is also sufficient for air delivery.
Body texture is inevitably inferior, so be careful if you are particular about the Garage's atmosphere.
【Review】
The Body is cheap but functional enough.
If you are not particular about the Nozzzle shape, etc., I think you can't go wrong with this product.
View detail
First time at Shivuichi
type of sushi with a single tile discarded on the bottom (now called a "shibuichi") (1/4) I have never used the "Ratchet Driver", but I would like to use it as a Ratchet Driver.
Purchase
I found that Size is surprisingly useful for parts that do not require much Torque or when you want to turn quickly.
GEAR is solid and push release type.
This price is a great cosmetic.
View detail
Standard products in Eyelet Punch
Purchased to create a hole for Carabiner on Baseball cap to be used when getting off Motorcycle. It expands the range of carrying options.
The product feels solid and usable, and there are no problems. The product comes with an eyelet, so it can be used right away.
It is also reasonably priced, so you can use it in various ways if you have one.
View detail
thin
I wanted something thin as a Spanner for tightening Nut and found this one and bought it.
Large, thin, and just right, and the price was reasonable.
View detail