Reviews
It's a good thing to have.
The socket system was unified with a 3/8 socket angle, but only Impact had a 1/2 size socket angle, so we could not share the same socket. I bought this one because it is cheap and can be shared. I am not dissatisfied with the quality and usability. View detail
Used for Torque management of brake hose banjo adapter tightening
Aluminum banjo to avoid cracking and splitting due to over-tightening.
Wobble is minimal and the feel is good.
There are not that many scenes used, but since the price is Reasonable, I don't think it's a problem.
Note that the mounting orientation on the Torque wrench needs to be corrected, so we recommend referring to the WrenchManufacturer's usage instructions.
View detail
Double nut or Shift rod.
I bought it to use for double nut and shift rod.
It is 3mm, or about half the thickness of KTC's 6.5mm on hand.
The angle is 75°, which is not so common, so it is easy to hang even if Arm and Shift rod overlap.
Although there is a problem of strength, it would have been better if the jaws had been made a little smaller, as I don't think that high Torque will be applied to thin-lipped products.
View detail
I don't use Size very often.
I rarely have a chance to use a 27mm Combination wrench, but I bought a SIGNET wrench with a good balance of price and quality, thinking it would be used occasionally for suppressing Kashimaru-kun's Holder and for Axle Shaft of Big bike.
It is indeed a powerful Size.
View detail
Appropriate tools are easy to use
I needed a 15mm Wrench for toe adjustment on my car and always tried my best with a regular length Wrench. I bought a LongWrench because it became sticky and hard to turn if I didn't touch it for a while, and I was able to adjust it easily. I tend to be in an impossible position when adjusting it, so it can be dangerous to turn it with too much effort. I am glad I purchased it. View detail
To the Magic Remodeling Base
[How is it used?
First of all, I would like to apologize to Manufacturer,... I am sorry.
NSR250R (MC21) I purchased this product because I could not turn the cylinder nut under the RCValve of the "R" with the tools I have on hand and had to make a magic modification.
Was the one you received as per Image?
It is a Nut with a 1/4 insert diameter that is quite short in overall length as advertised.
The texture and precision of the Socket are perfect.
How was your experience with it?
If you have ever removed the Cylinder on the Rear bank side of the MC21, you know that it is in a rather troublesome position.
I visited the blog of a person who has made his own by cutting cheap Nut and put it into practice.
As you can see in the photo, I thought I had pushed and shaved it down quite a bit, but the height was still very Limit.
I tried my best to turn the nut with my Spanner, but it was a hexagonal type, so I was able to hold it firmly and remove it safely.
[Points to note]
The insert angle is 1/4, so applying too much Torque is dangerous.
How did it compare to other products?
T2Racing offers a special tool for this nut, but it is so expensive that I was hesitant to buy it.
https://www.webike.net/sd/24576874/
If you plan to work on it a number of times and want to be sure it will work, you may want to buy it.
【Review】
I think the Nut itself is very well made and accurate.
It would have been best if there was a shorter one, but this product was the most suitable for my requirements, so....
It was quite a challenge, but I am glad that I managed to turn the nut.
View detail
Switch and volume of electronic devices, etc.
It is a MONKEY Wrench, but it is made with a very thin tip.
The basic usage is similar to that of the MONKEY Wrench, but the supplemented design allows tightening even in places where there are other objects just above the occupied portion.
The parts where this would come alive would be the parts that are held in place by thin nut, such as the SwitchBody mounting area.
With Motorcycle, I can't think of many places to utilize it.
In my case, I use it for electronic work as a hobby and for tightening radio golds at work, etc.
It is not used that often.
Normally, I would use a regular MONKEY, and I think it would be convenient, but I don't think it is worth the effort.
View detail
It is solid in reasonable Kami and I thought that it was a recommend.
It is solid in reasonable Kami and I thought that it was a recommend. View detail
It is solid in reasonable Kami and I thought that it was a recommend.
It is solid in reasonable Kami and I thought that it was a recommend. View detail
It is solid in reasonable Kami and I thought that it was a recommend.
It is solid in reasonable Kami and I thought that it was a recommend. View detail
It is solid in reasonable Kami and I thought that it was a recommend.
It is solid in reasonable Kami and I thought that it was a recommend. View detail
It is solid in reasonable Kami and I thought that it was a recommend.
It is solid in reasonable Kami and I thought that it was a recommend. View detail
Although (+)(-) substitution type of the other company was used, since it had exhausted, it replaced in passing. Although only (+) was mainly used, since it was cheap, (-) was arranged. Is the direction of the stationary type solid too? It is
Although (+)(-) substitution type of the other company was used, since it had exhausted, it replaced in passing.
Although only (+) was mainly used, since it was cheap, (-) was arranged.
Is the direction of the stationary type solid too?
It is not a penetration driver although I think that there are those [ no ] who strike this size.
View detail
Although it is the tool which was being used for many [Webike-monitor] years, since it has lost, it purchases again. It is one it is reliable.
Although it is the tool which was being used for many [Webike-monitor] years, since it has lost, it purchases again.
It is one it is reliable.
View detail
He bought 8, 10, and 12 which are often used. Comparatively [ cheap ], I think that it is a level which the thickness of a socket does not worry, either. If it is a car with many complicated places, it can use for motorcycle maintenance enough at
He bought 8, 10, and 12 which are often used.
Comparatively [ cheap ], I think that it is a level which the thickness of a socket does not worry, either.
If it is a car with many complicated places, it can use for motorcycle maintenance enough at any rate.
View detail
He bought 8, 10, and 12 which are often used. Comparatively [ cheap ], I think that it is a level which the thickness of a socket does not worry, either. If it is a car with many complicated places, it can use for motorcycle maintenance enough at
He bought 8, 10, and 12 which are often used.
Comparatively [ cheap ], I think that it is a level which the thickness of a socket does not worry, either.
If it is a car with many complicated places, it can use for motorcycle maintenance enough at any rate.
View detail
Easy to use
It is a fairly inexpensive universal joint, but the quality is good and the tool is satisfactory enough.
It moves well and is easy to use for working in tight spaces.
View detail
Convenient universal joint
This is a universal joint that can handle Bolt and Nut efficiently in a narrow space. The best feature is with Magnet, which can prevent the screw from falling off when it is loosened. View detail
You can expect durability.
The Ratchet Handlebar is an essential part of the maintenance process for both cars and motorcycles, and combines ease of use with quality. The handlebar is well made and durable, and can be torqued up to the point of full tightness. View detail
Torque is easy to apply.
It is also effective for screws with locktite such as Bar End. View detail