Reviews
It's a good thing to have.
The socket system was unified with a 3/8 socket angle, but only Impact had a 1/2 size socket angle, so we could not share the same socket. I bought this one because it is cheap and can be shared. I am not dissatisfied with the quality and usability. View detail
Used for Torque management of brake hose banjo adapter tightening
Aluminum banjo to avoid cracking and splitting due to over-tightening.
Wobble is minimal and the feel is good.
There are not that many scenes used, but since the price is Reasonable, I don't think it's a problem.
Note that the mounting orientation on the Torque wrench needs to be corrected, so we recommend referring to the WrenchManufacturer's usage instructions.
View detail
Double nut or Shift rod.
I bought it to use for double nut and shift rod.
It is 3mm, or about half the thickness of KTC's 6.5mm on hand.
The angle is 75°, which is not so common, so it is easy to hang even if Arm and Shift rod overlap.
Although there is a problem of strength, it would have been better if the jaws had been made a little smaller, as I don't think that high Torque will be applied to thin-lipped products.
View detail
For CRF250L front axle
Purchased to loosen the front axle of CRF250L.
Although 14mm Hex is not a tool that is used very often, I purchased a solid tool because Off cars often have a lot of suspension modifications and there are opportunities to remove/attach Wheels.
The insert is 1/2, so you need to be careful only there, but it is a stable SIGNET and satisfactory tool.
View detail
I don't use Size very often.
I rarely have a chance to use a 27mm Combination wrench, but I bought a SIGNET wrench with a good balance of price and quality, thinking it would be used occasionally for suppressing Kashimaru-kun's Holder and for Axle Shaft of Big bike.
It is indeed a powerful Size.
View detail
Used with Axle Nut
No problems with this product. I use it with Axle Nut on my off-road motorcycle.
For a moment I thought about substituting Pliers, etc., but then I thought, well, I'll just buy it and add another Socket! (Lol)
SIGNET is a Brand that I trust, so I chose them first based on cosmetics. The performance is also fine.
View detail
For removal of Stem Nut
I bought this for removing the Stem Nut when replacing the Top Bridge on my GSX1300R HAYABUSA.
It works fine, and it costs about 2000 yen if you buy it at Home center, so this one is cheaper.
Info:(Japanese only)
GSX1300R HAYABUSAStem Nut tightening Torque:90N
View detail
Fits my needs on hard to reach places with a ratchet
About quality and texture 5/5 - Chromed and slim ratchet About the feeling of use 5/5 - smooth gear ratcheting action Products to buy together: Maybe a pouch or tray to store this. Difficulty of installation N/A Cost performance and comparison with other products 4/5 - Could've come with a proper tool pouch About shipping and packaging: 5/5 - Bubble wrapped all the way Any concerns, cautions, or advice when purchasing: Decide for a place to store the tools before buying View detail
Appropriate tools are easy to use
I needed a 15mm Wrench for toe adjustment on my car and always tried my best with a regular length Wrench. I bought a LongWrench because it became sticky and hard to turn if I didn't touch it for a while, and I was able to adjust it easily. I tend to be in an impossible position when adjusting it, so it can be dangerous to turn it with too much effort. I am glad I purchased it. View detail
Cheap but good
The air gun is powerful and has a good volume of air emission. View detail
Excellent product . Able to adjust size by removing nozzle to adapt to different size of opening . Highly recommend. View detail
To the Magic Remodeling Base
[How is it used?
First of all, I would like to apologize to Manufacturer,... I am sorry.
NSR250R (MC21) I purchased this product because I could not turn the cylinder nut under the RCValve of the "R" with the tools I have on hand and had to make a magic modification.
Was the one you received as per Image?
It is a Nut with a 1/4 insert diameter that is quite short in overall length as advertised.
The texture and precision of the Socket are perfect.
How was your experience with it?
If you have ever removed the Cylinder on the Rear bank side of the MC21, you know that it is in a rather troublesome position.
I visited the blog of a person who has made his own by cutting cheap Nut and put it into practice.
As you can see in the photo, I thought I had pushed and shaved it down quite a bit, but the height was still very Limit.
I tried my best to turn the nut with my Spanner, but it was a hexagonal type, so I was able to hold it firmly and remove it safely.
[Points to note]
The insert angle is 1/4, so applying too much Torque is dangerous.
How did it compare to other products?
T2Racing offers a special tool for this nut, but it is so expensive that I was hesitant to buy it.
https://www.webike.net/sd/24576874/
If you plan to work on it a number of times and want to be sure it will work, you may want to buy it.
【Review】
I think the Nut itself is very well made and accurate.
It would have been best if there was a shorter one, but this product was the most suitable for my requirements, so....
It was quite a challenge, but I am glad that I managed to turn the nut.
View detail
Allows for Clean and Tidy Oil Changes
About quality and texture: I am happy with the quality of the oil drain pan from Signet. The product is made from plastic via injection molding resulting in a light weight yet strong oil drain pan. About the feeling of use: The design of the oil drain pan allows for clean and tidy oil changes. With a large diameter opening this allows for the old draining oil to be captured without creating a mess and with the spout this allows for the old oil to be transferred easily to a bottle for disposal. Products to buy together: Some more tools for servicing my motorcycles would also be desirable to purchase along side the oil drain pan. Difficulty of installation: The process to install takes just a minute to position the oil drain pan and with the large diameter opening accuracy is not important. Cleaning up is very simple with the well designed spout to pour out the old oil and then just a rag is needed to give the plastic surface a wipe down before storing the oil drain pan away until next time. Cost performance and comparison with other products: Good costing as you are getting a quality product with all the features that make it the oil drain pan to go with. This is the 8 liter capacity pan and there are much larger capacity pan available if needed but all price very similar. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. Any concerns, cautions, or advice when purchasing: This design oil drain pan is fantasic for the home workshop but if you plan on doing oil changes at mobile location you will want to purchase the oil drain pan that can be sealed and able to transport away for disposal of your oil at a later time. View detail
Not in Tools Set!
Ducati 900SS needs 11mm for brake fluid replacement with brembo caliper.
When I put Glasses on it to replace it, I found it was too loose with 12mm, and it didn't bite with 10mm... I didn't think it would work with 11mm...?
I didn't have 11mm in my tool box, so I hurriedly snapped up SIGNET's Combination wrench 11mm.
I received the product and immediately replaced the fluid, but it was an exact 11mm. 11mm may not be used very often, but you need a tool.
View detail
I needed it for RamMount.
I was in a hurry to buy this Screw when I tried to install Ram Mount. I had no idea it was Inch. I chose this one in millimeter because I would never use Inch Screw in the future.
I have to look at everyone's Review properly before I buy.
They turned the Screw of Inch well.
View detail
Suddenly needed tools are useful
Maintenance is required suddenly, so it would be a good idea to prepare in advance.
I would be happy to spray lubricant and use Shock driver to remove it before using the reverse Tap.
It's heavy but I like SIGNET tools and the quality is solid!
The 12.7 socket can be used as it is, which is convenient.
If you have a Conversion Adapter with a plug-in angle, you can use any Socket.
I recommend SIGNET for its good cost performance and quality.
View detail
Desorption …
The description said it was detachable, but it could only be used in the detachable direction.
I was very disappointed that it could not be tightened, but since I was able to remove the Filter, which was tightened very tightly, and the construction of the product itself is solid, I think it is not so bad if you break it down.
View detail
I can do without it, but it would be useful.
Quantity of Hex wrench:I have a Set, but this Grip-type Hex wrench is useful when I want to apply Torque firmly while turning quickly.
With motorcycles, it is mainly used to remove the exterior and other parts. I mainly use it for maintenance on road motorcycles.
SIGNET's Wrench set is easy to buy because of its reasonable price. However, the Case is too large, so I would like to see some kind of device for it.
I Rose it and store it in my tool box.
View detail
useful tool
Crowbars are often needed to repair motorcycles, but plastic crowbars are not durable and easy to break. The SIGNET crowbar set purchased by webike is very strong and durable. There are four models of different sizes suitable for use in various spaces. Even small places can be easily operated. -------------------------------------------------- -------- Motorcycles often need to use prying rods, but plastic prying sticks are not durable and easy to break. The SIGNET pry rod group purchased by Webike is very strong and durable. A total of four models are suitable for various spaces. Then Small places can also be easy to use. Powered by Google Translator View detail
Tools to carry when touring on forest roads
I always enjoy forest road touring on my beloved HUSQVARNA TE250.
I often have motorcycle troubles while touring, so it is very important to have the right tools with me.
We purchased this Tools Set because it seemed to be easy to work with in the mountains.
The decision was made based on the fact that there are 6mm and 7mm small sockets for HUSQVARNA, and that there is no need to change the size of the socket.
I have used it many times in the field, and it is very easy to handle and facilitates work.
One complaint I would make is that if the thickness were a little thinner, it would have been 100 points. But since it fits perfectly inside the Bag, it is not a problem again.
View detail